Investigation of Uncertainty Changes in Model Outputs for Finite Element Model Updating Using Structural Health Monitoring Data
Journal of Structural Engineering, VA/AMERİKA BİRLEŞİK DEVLETLERİ, Vol. 140, No. 11, Kasım 2014, s. 4014078, ISSN: 0733-9445
ERDOĞAN YILDIRIM SERHAT,GÜL MUSTAFA,ÇATBAŞ NECATİ,GÜNDEŞ BAKIR PELİN
|
Structural identification St Id using finite element models for optimum sensor configuration and uncertainty quantification
Finite Elements in Analysis and Design, Amsterdam/HOLLANDA, Vol. 81, Nisan 2014, s. 1-13, ISSN: 0168874X
ERDOĞAN YILDIRIM SERHAT,ÇATBAŞ NECATİ,GÜNDEŞ BAKIR PELİN
|
Evaluation of the different genetic algorithm parameters and operators for the finite element model updating problem
Computers and Concrete, DAEJEON/GÜNEY KORE, Vol. 11, No. 6, Haziran 2013, s. 541-569, ISSN: 1598-8198
ERDOĞAN YILDIRIM SERHAT,GÜNDEŞ BAKIR PELİN
|
PARAMETRIC FINITE ELEMENT MODEL UPDATING OF BRICK MASONRY MINARETS BY USING OPERATIONAL MODAL ANALYSIS METHOD
Mühendislik, Isfahan Üniversitesi, 2023
RAZİE TALEBİ
|
Influence of heat treatments on the formability of the 6061 Al alloy sheets: experiments and GTN damage model
The International Journal of Advanced Manufacturing Technology, Vol. 113, Nisan 2021, s. 2277-2299, ISSN: 14333015 02683768
YILDIZ RAŞİD AHMED, YILMAZ ŞAFAK
|
A Numerical Study on the Estimation of Liquefaction-Induced Free-Field Settlements by Using PM4Sand Model
KSCE JOURNAL OF CIVIL ENGINEERING, Vol. 26, No. 2, Ocak 2022, s. 12, ISSN: 1226-7988
SUBAŞI OZAN, KOLTUK SERDAR, İYİSAN RECEP
|
Finite element simulation of the behavior of the periodontal ligament A validated nonlinear contact model
Journal of Biomechanics, Vol. 47, No. 12, Eylül 2014, s. 2883-2890, ISSN: 00219290
TUNA MERAL,SÜNBÜLOĞLU EMİN,BOZDAĞ SÜREYYA ERGÜN
|
Experimental Investigation of GTN model parameters of 6061 Al alloy
EUROPEAN JOURNAL OF MECHANICS A-SOLIDS, Vol. 83, Ekim 2020, ISSN: 0997-7538
YILMAZ ŞAFAK,YILDIZ AHMET RAŞİT
|
Impact behavior of model porous concretes
MATERIALS AND STRUCTURES, Vol. 52, No. 5, Ekim 2019, ISSN: 1359-5997
AĞAR ÖZBEK AYDA ŞAFAK,WEERHEİJM JAAP,VAN BREUGEL KLAAS
|
Mechanical response of textile reinforced cementitious composite tubes under monotonic and cyclic loadings
CONSTRUCTION AND BUILDING MATERIALS, Vol. 251, Ağustos 2020, ISSN: 0950-0618
GENÇOĞLU MUSTAFA,DÖNMEZ AHMET ABDULLAH,DONMEZ DİDEM
|
Mechanical response of textile reinforced cementitious composite tubes under monotonic and cyclic loadings
Construction and Building Materials, Vol. 251, Ağustos 2020, s. 118963, ISSN: 0950-0618
DÖNMEZ DİDEM,DÖNMEZ AHMET ABDULLAH,GENÇOĞLU MUSTAFA
|
Numerical Analysis of Historic Structural Elements Using 3D Point Cloud Data
The Open Construction & Building Technology Journal, Vol. 10, Mayıs 2016, s. 233-245, ISSN: 1874-8368
ALMAÇ UMUT,POLAT PEKMEZCİ IŞIL,AHUNBAY METİN
|
Finite element model of the Jefferson fracture comparison with a cadaver model
European Spine Journal, Vol. 10, No. 3, Haziran 2001, s. 257-263, ISSN: 0940-6719
BOZKUŞ MUHTAR HAKAN,KARAKAŞ AŞKIN,HANCI MEHMET MURAT,UZAN MUSTAFA,BOZDAĞ SÜREYYA ERGÜN,SARIOĞLU ALİ
|
Numerical model for an IWRC bending over sheave problem and its finite element solution
nt. Conf. on Applied, Numerical and Computational Mathematics, ICANCM’xx11, Barcelona/İSPANYA, 15 Eylül 2011, s. 199-205
İMRAK CEVAT ERDEM,ERDÖNMEZ CENGİZ
|
Size Effect on Punching Strength of Reinforced Concrete Slabs without and with Shear Reinforcement
ACI Structural Journal, Vol. 114, No. 4, Ağustos 2017, s. 875-886, ISSN: 0889-3241
DÖNMEZ AHMET ABDULLAH,BAZANT ZDENEK P.
|
Finite element simulation of the behavior of the periodontal ligament A validated nonlinear contact model
Journal of Biomechanics, Vol. 47, No. 12, Eylül 2014, s. 2883-2890, ISSN: 00219290
TUNA MERAL, SUNBULOGLU EMİN, BOZDAG ERGUN
|
Development of Finite Element Model for a Special Lead Extrusion Damper
Sakarya University Journal of Science, Vol. 25, No. 5, Ekim 2021, s. 1159-1167, ISSN: 1301-4048
GÜLLÜ AHMET, ÇALIM FURKAN, SOYDAN CİHAN, YÜKSEL ERCAN
|
Static analysis of higher order shear deformation beam model with mixed finite element formulation
International Conference on Mechanical, Architectural Civil Engineering, IISRO, Dubai/SUUDİ ARABİSTAN, 17 Kasım 2013
ÖZÜTOK ATİLLA,MADENCİ EMRAH,KADIOĞLU FETHİ
|
Plastic-Damage Modeling of Unreinforced Masonry Walls (URM) Subject to Lateral Loading
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING, Vol. 42, No. 9, 2017, s. 4201-4220, ISSN: 2193-567X
ALGOHİ BASHEER H.,BALUCH MOHAMMED H.,RAHMAN MUHAMMAD K.,AL-GADHİB ALİ H.,DEMİR CEM
|
Fatigue life prediction of existing crane runway girders
JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH, Vol. 66, No. 10, Ekim 2010, s. 1164-1173, ISSN: 0143-974X
ÇAĞLAYAN BARLAS ÖZDEN,ÖZAKGÜL KADİR,ÖVÜNÇ TEZER,ERDOĞAN UZGİDER
|