Effects of particle size, bimodality and heat treatment on mechanical properties of pumice reinforced aluminum syntactic foams produced by cold chamber die casting
CHINA FOUNDRY, Vol. 18, No. 6, Ocak 2021, s. 529-540, ISSN: 1672-6421
BOLAT ÇAĞIN, AKGÜN İSMAİL CEM, GÖKŞENLİ ALİ
|
Investigation of fabrication optimization and physical and mechanical properties of metallic syntactic foams manufactured by cold chamber die casting
Lisansüstü Eğitim Enstitüsü, İstanbul Teknik Üniversitesi, 2022
ÇAĞIN BOLAT
|
Preparation and characterization of polypropylene nanocomposite materials reinforced with cellulose nano whiskers by solvent casting
Fen Bilimleri Enstitüsü, İstanbul Teknik Üniversitesi, 2012
ELİF RAFİYE BAHAR
|
Comparison of polylactide/cellulose nanocrystal nanocomposites properties prepared through solution casting and melt mixing
Fen Bilimleri Enstitüsü, İstanbul Teknik Üniversitesi, 2019
DOĞAN ARSLAN
|
Combined effects of hollow fiber fabrication conditions and casting mixture composition on the properties of polysulfone ultrafiltration membranes
Separation Science and Technology, Vol. 51, No. 12, Aralık 2016, s. 2070-2079, ISSN: 0149-6395
ŞENGÜR TAŞDEMİR REYHAN,ÜRPER GÜLSÜM MELİKE,TÜRKEN TÜRKER,GENCELİ NACİYE ESRA,TARABARA VOLODYMYR V,KOYUNCU İSMAİL
|
Modeling of the Impact of Initial Mold Temperature, Al5Ti1B and Al10Sr Additions on the Critical Fraction of Solid in Die Casting of Aluminum Alloys using Fuzzy Expert System
ACTA PHYSICA POLONICA A, Vol. 135, No. 5, Mayıs 2019, s. 1105-1107, ISSN: 0587-4246
TEKE ÇAĞATAY,ÇOLAK MURAT,TAŞ MEHMET,İPEK MÜMTAZ
|
Scalability of OpenFOAM for Simulations of a Novel Electromagnetic Stirrer for Steel Casting
The 2016 International Conference on Parallel and Distributed Processing Techniques and Applications (PDPTA'16), World Congress in Computer Science, Computer Engineering & Applied Computing, Las Vegas/AMERİKA BİRLEŞİK DEVLETLERİ, 25 Temmuz 2016, s. 111-116
MAZZA ISABELLA,DURAN AHMET,HUNDUR YAKUP,PERSI CRISTIANO,SANTORO ANDREA,TUNÇEL MEHMET
|
Failure Mechanisms in PMMA ATH Acrylic Casting Dispersion
Journal of the Mechanical Behavior of Materials, Vol. 17, No. 2, 2006, s. 79-95, ISSN: 2191-0243
NİE SHİHUA,BAŞARAN CEMAL,HUTCHİNS CLAYDE S,ERGÜN HALE
|
Development and Evaluation of a New Eco-friendly Sodium Silicate-Based Binder System
International Journal of Metalcasting, Vol. 12, No. 4, Ekim 2018, s. 765-771, ISSN: 1939-5981
ÜNLÜ NECİP,ODABAŞ AHMET
|
Investigation of alternative ways for recycling waste foundry sand: an extensive review to present benefits
CANADIAN JOURNAL OF CIVIL ENGINEERING, Vol. 45, No. 6, Ocak 2018, s. 423-434, ISSN: 0315-1468
GEDİK ABDULGAZİ,LAV ABDULLAH HİLMİ,LAV MUSAFFA AYŞEN
|
Use of infrared thermography for temperature measurement during evaporative casting of thin polymeric films
Journal of Membrane Science, Vol. 107, No. 3, Kasım 1995, s. 249-261, ISSN: 03767388
SHOJAİE S S,GREENBERG ALAN R,KRANTZ WİLLİAM B,ERSOLMAZ ŞERİFE BİRGÜL
|
Investigation of alternative ways for recycling waste foundry sand: an extensive review to present benefits
CANADIAN JOURNAL OF CIVIL ENGINEERING, Vol. 45, No. 6, Ocak 2018, s. 423-434, ISSN: 0315-1468
GEDİK ABDULGAZİ,LAV ABDULLAH HİLMİ,LAV MUSAFFA AYŞEN
|
Characterization and comparison of thermal mechanical properties of vermiculite polyvinylbutyral nanocomposites synthesized by solution casting method
APPLIED CLAY SCIENCE, Vol. 151, Ocak 2018, s. 189-193, ISSN: 0169-1317
İŞÇİ TURUTOĞLU SEVİM,İSCİ YAVUZ
|
Water Explosion Tendency In Sand Mold Casting Process
8. Uluslararası Döküm Kongresi, İstanbul/TÜRKİYE, 29 Eylül 2016, s. 1064-1067
ÜNLÜ NECİP
|
Scalability of OpenFOAM for Simulations of a Novel Electromagnetic Stirrer for Steel Casting
The 2016 International Conference on Parallel and Distributed Processing Techniques and Applications (PDPTA'16), 25 Temmuz 2016
MAZZA ISABELLA,DURAN AHMET,HUNDUR YAKUP,PERSI CRISTIANO,SANTORO ANDREA,TUNÇEL MEHMET
|
Synthesis of Mo2NiB2 And Mo2FeB2 Hard Alloys by Combined Centrifugal Casting–SHS Process
The International Conference Dedicated to the 50th Anniversary of Self-Propagating High Temperature Synthesis (SHS-50), Moskova/RUSYA FEDERASYONU, 20 Kasım 2017, s. 27-28
IKORNİKOV DM,SANİN VN,YUKHVİD VI,DERİN CEVAT BORA,YÜCEL ONURALP
|
Study of Slab Quality and Tonnage Determination for Overlapping Heats in a Continuous Casting Tundish
IMMC 2016- 18th International Metallurgy & Materials Congress,, 29 Eylül 2016
ORAN AYŞE,GÜREL MÜBERRA,DERİN CEVAT BORA
|
Cast Mo2NiB2 and Mo2FeB2 Metal Matrix Composites by Combined Centrifugal Casting SHS Process
XIII International Symposium on Self-Propagating High-Temperature Synthesis, 12 Ekim 2015, s. 205-206
IKORNİKOV D,SANİN V,YUKHVİD V,ANDREEV D,YÜCEL ONURALP,DERİN CEVAT BORA
|
INVESTIGATING THE TRIBOLOGICAL BEHAVIOR OF ALUMINUM ALLOYS PRODUCED BY A NOVEL METHOD: GAS-INDUCED SEMI-SOLID (GISS) CASTING TECHNOLOGY
INTERNATIONAL JOURNAL OF METALCASTING, Mayıs 2021, ISSN: 1939-5981
TEZGEL YILMAZ, TUNÇ İPEK, KAYA OĞUZHAN, YEŞİLÇUBUK ALPER, MUTLU MUAMMER, KELEŞ ÖZGÜL
|
Determining the Critical Fraction of Solid Value in Casting Process with Fuzzy Expert System Approach
8th International Advances in Applied Physcics an Material Science, 24 Nisan 2018, s. 153
TEKE ÇAĞATAY,ÇOLAK MURAT,TAŞ MEHMET,İPEK MÜMTAZ
|