PARAMETRIC ANALYSIS FOR HOLLOW SHAFT USED AT ELECTRIC MOTORS WITH ROTOR COOLING
Lisansüstü Eğitim Enstitüsü, İstanbul Teknik Üniversitesi, 2024
BURCU KANAY
|
The Effect of Various Cross-Section Designs in Cooling Channels on Heat Transfer Performance
Lisansüstü Eğitim Enstitüsü, İstanbul Teknik Üniversitesi, 2024
EMRE FINDIK
|
Development of heat rejection prediction methodology for selection of cooling elements in diesel engines
Lisansüstü Eğitim Enstitüsü, İstanbul Teknik Üniversitesi, 2022
EMRE EPGÜZEL
|
Response of a hyperbolic cooling tower under seismic excitations and wind load
Lisansüstü Eğitim Enstitüsü, İstanbul Teknik Üniversitesi, 2022
MUTZ ALZOUABI
|
Position optimization of film cooling holes on a squealer turbine blade tip
Fen Bilimleri Enstitüsü, Marmara Üniversitesi, 2019
FARUK YILDIZ
|
Design, fabrication, and experimental evaluation of microchannel heat sinks in CPU cooling
Fen Bilimleri Enstitüsü, Orta Doğu Teknik Üniversitesi, 2010
AZİZ KOYUNCUOĞLU
|
Thermoelectric cooling of a pulsed mode 1064 nm diode pumped Nd: Yag laser
Fen Bilimleri Enstitüsü, Orta Doğu Teknik Üniversitesi, 2010
YÜKSEL YÜKSEL
|
Optimizing heat exchanger parameters of a Joule-Thomson cryogenic cooler to improve the cooling performance
Fen Bilimleri Enstitüsü, Orta Doğu Teknik Üniversitesi, 2018
MURAT BAKİ
|
Corrosion protection of mild steel in cooling water systems with green polymeric inhibitors
Fen Bilimleri Enstitüsü, İstanbul Teknik Üniversitesi, 2020
İPEK ÖZTÜRK
|
Planning and stochastic evaluation of combined cooling heat and power systems under uncertainty
Enerji Enstitüsü, İstanbul Teknik Üniversitesi, 2019
İBRAHİM ERSÖZ
|
Energy and economic assessment of major free cooling retrofits for data centersin Turkey
Turkish Journal of Electrical Engineering and Computer Sciences, Vol. 27, No. 3, Mayıs 2019, s. 2197-2212, ISSN: 1300-0632
GÖZCÜ OZAN, ERDEN HAMZA SALİH
|
Experimental Demonstration and Flow Network Model Verification of Induced CRAH Bypass for Cooling Optimization of Enclosed-Aisle Data Centers
IEEE Transactions on Components, Packaging and Manufacturing Technology, Vol. 7, No. 11, Kasım 2017, s. 1795-1803, ISSN: 2156-3950
ERDEN HAMZA SALİH,KOZ MUSTAFA,YİLDİRİM MEHMET T.,KHALİFA H. EZZAT
|
Investigation of induced CRAH bypass for air-cooled data centers using computational fluid dynamics
2017 25th International Conference on Software, Telecommunications and Computer Networks (SoftCOM), Split, Croatia/HIRVATİSTAN, 21 Eylül 2017
ERDEN HAMZA SALİH
|
The Texture of The Opaque Component from The Cooling Energy Conservation Viewpoint
IEEES 2003, İZMİR/TÜRKİYE, 13 Temmuz 2003, s. 479-484
AKŞİT ŞULE FİLİZ,KOÇLAR ORAL GÜL
|
Assessment of the Energy Performance of Cogeneration Systems for Powering and Cooling Data Centers
Volume 2: Thermal Management Data Centers and Energy Efficient Electronic Systems, Burlingame, California, USA/AMERİKA BİRLEŞİK DEVLETLERİ, 16 Temmuz 2013
RINGHAM DALE,RICE DAN,GRANETZ BRIAN,ERDEN HAMZA SALİH,KHALIFA H EZZAT,SCHMIDT ROGER R
|
Energy saving potential of low-temperature cooling of computers
Fourteenth Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm), Orlando, FL, USA/AMERİKA BİRLEŞİK DEVLETLERİ, 27 Mayıs 2014
KHALIFA H EZZAT,ERDEN HAMZA SALİH,DE ROUGE ROMAIN BONABE
|
Solar energy potential for heating and cooling systems in big cities of Turkey
Energy Conversion and Management, Vol. 43, No. 14, Eylül 2002, s. 1829-1837, ISSN: 0196-8904
ŞAYLAN LEVENT,ŞEN ORHAN,TOROS HÜSEYİN,ARISOY AHMET
|
Impact of ambient air conditions load factor and ınter cooling on the performance of a combined cycle cogeneration plant
4th International Exergy, Energy and Environment Symposium held in American University of Sharjah, UAE, SHARJAH/BİRLEŞİK ARAP EMİRLİKLERİ, 18 Nisan 2009
YENER HIDAYET VOLKAN,DURMAYAZ AHMET
|
Assessment of the impact of climate change on the residential cooling energy requirement and fuel consumption in Adana
ITEC2001 4th International Thermal Energy Conference, Çeşme, İzmir/TÜRKİYE, 8 Temmuz 2001, s. 51-56
DURMAYAZ AHMET,KADIOĞLU MİKDAT
|
Effect of high temperature and cooling conditions on aerated concrete properties
Construction and Building Materials, Vol. 23, No. 3, Mart 2009, s. 1240-1248, ISSN: 09500618
TANAÇAN LEYLA,HALİT YAŞA ERSOY,ARPACIOĞLU ÜMİT TURGAY
|