Predicting Cutting Performance of Chisel Tools by Using Physical and Mechanical Properties of Natural Stones
European Rock Mechanics Symposium (EUROCK 2012, ISRM International Symposium), 28 Mayıs 2012
ÇOPUR HANİFİ,BALCI CEMAL,BİLGİN NUH,TUMAÇ DENİZ,AVUNDUK EMRE
|
The Effect of Mechanical Properties on Performance of Diamond Wire Machines
The Fifth Thailand Symposium on Rock Mechanics- Thairock 2015, bangkok/TAYLAND, Vol. 389, No. 395, 22 Ocak 2015
TUMAÇ DENİZ,AVUNDUK EMRE,BAŞYİĞİT MİKAİL,ÇOPUR HANİFİ,SELMAN ER,BALCI CEMAL
|
Cutting Performance of Chain Saw and Diamond Wire Machines in Beige Marble Quarry
8th Asian Rock Mechanics Symposium-ARMS8, s. 6
AVUNDUK EMRE,TUMAÇ DENİZ,BAŞYİĞİT MİKAİL,ER SELMAN,ÇOPUR HANİFİ,BALCI CEMAL
|
Pre investigation to Determine the Effects of Rock Properties on Performance of Chain Saw and Diamond Wire Machines
8th Asian Rock Mechanics Symposium-ARMS8, s. 8
TUMAÇ DENİZ,AVUNDUK EMRE,SELMAN ER,BAŞYİĞİT MİKAİL,ÇOPUR HANİFİ,BALCI CEMAL,YASAN İLKER
|
Buckling Analysis of Inclined Beam Column Structures by Using Differential Transform Method DTM
Applied Mechanics and Materials, Vol. 390, Ağustos 2013, s. 251-255, ISSN: 1662-7482
OZKAN AYSE,OZKOL İBRAHİM
|
On duality in optimal control problems with second-order differential inclusions and initial-point constraints
Proceedings of the Institute of Mathematics and Mechanics,National Academy of Sciences of Azerbaijan, Vol. 46, No. 1, Ocak 2020, s. 115, ISSN: 2409-4986
MAHMUDOV ELMKHAN, MARDANOV MİSİR, MARDANOV MİSİR
|
EFFECTS OF SPAN MORPHING ON FLUTTER CHARACTERISTICS OF SUBSONIC WING
14th World Congress on Computational Mechanics (WCCM) (ECCOMAS Congress 2020), 11 Ocak 2021
DURMUŞ DAMLA, KAYA METİN ORHAN
|
Effects of the side walls on the unsteady flow of a second grade fluid in a duct of uniform cross section
International Journal of Non-Linear Mechanics, 2004
ERDOĞAN MEHMET EMİN,İMRAK CEVAT ERDEM
|
Ecological Performance Analysis of Irreversible Rankine Cycle
Applied Mechanics and Materials, Vol. 390, Ağustos 2013, s. 596-600, ISSN: 1662-7482
YEĞİNER YUSUF,KENÇ SERKAN,OZKOL İBRAHİM,KÖMÜRGÖZ KIRIŞ GÜVEN
|
The effects of the side walls on the flow of a second grade fluid in ducts with suction and injection
International Journal of Non-Linear Mechanics, 2007
ERDOĞAN MEHMET EMİN,İMRAK CEVAT ERDEM
|
On the comparison of two different solutions in the form of series of the governing equation of an unsteady flow of a second grade fluid
International Journal of Non-Linear Mechanics, 2005
ERDOĞAN MEHMET EMİN,İMRAK CEVAT ERDEM
|
Analytical modeling of turn milling process geometry kinematics and mechanics
International Journal of Machine Tools and Manufacture, Vol. 91, Nisan 2015, s. 24-33, ISSN: 08906955
KARAGÜZEL UMUT,UYSAL EMRE,BUDAK ERHAN,BAKKAL MUSTAFA
|
NONDIMENSIONAL ANALYSIS OF TWO-DIMENSIONAL ELASTIC POROUS MATERIALS WITH REGULARLY DISTRIBUTED CIRCULAR HOLES
25th International Congress of Theoretical and Applied Mechanics, Milano/İTALYA, 23 Ağustos 2021
TÜFEKCİ MERTOL, PİR İNCİ, TÜFEKCİ EKREM
|
A Case Study of the Observed Damage in an RC Building After March 08 2010 Kovancilar Turkey Earthquake
World Congress on Advances in Structural Engineering and Mechanics, Seoul/GÜNEY KORE, 18 Eylül 2011
TAŞKIN AKGÜL BEYZA,MERT TUĞSAL ÜLGEN
|
Investigation of the Effect of Noise Content in the Recorded Strong Motions in Structural Behavior
World Congress on Advances in Structural Engineering and Mechanics, Seoul/GÜNEY KORE, 18 Eylül 2011
FATMA SEVİL MALCIOĞLU,TAŞKIN AKGÜL BEYZA
|
ECOP Based Comparative Study of Thermodynamic Cycles
Applied Mechanics and Materials, Vol. 390, Ağustos 2013, s. 655-659, ISSN: 1662-7482
YEĞİNER YUSUF,KENÇ SERKAN,OZKOL İBRAHİM,KÖMÜRGÖZ KIRIŞ GÜVEN
|
Estimation of Roof Displacements in Moderately Damaged Turkish RC Buildings by Nonlinear Dynamic Analysis and Empirical Expressions
World Congress on Advances in Structural Engineering and Mechanics, Seoul/GÜNEY KORE, 18 Eylül 2011
MERT TUĞSAL ÜLGEN,TAŞKIN AKGÜL BEYZA
|
Study on Development of Line Start IPM Synchronous Motor for Super Premium Efficiency Class
18TH INTERNATIONAL SYMPOSIUM ON APPLIED ELECTROMAGNETICS AND MECHANICS (ISEM) 2017, Chamonix/FRANSA, 3 Eylül 2017
BAYRAM DUYGU, ÜSTÜN ÖZGÜR, DURAK BURCU, GEDİK HAKAN, KIVANÇ ÖMER CİHAN
|
Mechanics of plio-quaternary faulting around the Karliova triple junction: implications for the deformation of Eastern part of the Anatolian Scholle
GEODINAMICA ACTA, Vol. 30, No. 1, Ocak 2018, s. 287-305, ISSN: 0985-3111
SANÇAR TAYLAN,AKYÜZ HÜSNÜ SERDAR,SCHREURS GUİDO,ZABCI CENGİZ
|
Study on Development of Line Start IPM Synchronous Motor for Super Premium Efficiency Class
18th International Symposium on Applied Electromagnetics and Mechanics (ISEM) 2017, Chamonix/FRANSA, 3 Eylül 2017
BAYRAM DUYGU,ÜSTÜN ÖZGÜR,DURAK BURCU,GEDİK HAKAN,KIVANÇ ÖMER CİHAN
|