TBM Performance Prediction using Laboratory Cutting Tests in Very Hard and Abrasive Rock Formations
International Conference on Tunnel Boring Machines in Difficult Grounds (TBM DiGs), Wuhan/ÇİN HALK CUMHURİYETİ, 21 Kasım 2017, s. 1-11
BİLGİN NUH,ÇOPUR HANİFİ,BALCI CEMAL,TUMAÇ DENİZ
|
Development of Performance Prediction Models for Block-Cutting Machines (S/T) with Circular Saws Used in Natural Stone Factories
26th International Symposium on Mine Planning Equipment Selection (MPES 2017), Lulea/İSVEÇ, 29 Ağustos 2017, s. 239-244
TUMAÇ DENİZ,CEVİM KAMİL CENGİZ,SHATERPOUR MAMAGHANİ AYDIN
|
Pre investigation to Determine the Effects of Rock Properties on Performance of Chain Saw and Diamond Wire Machines
8th Asian Rock Mechanics Symposium-ARMS8, s. 8
TUMAÇ DENİZ,AVUNDUK EMRE,SELMAN ER,BAŞYİĞİT MİKAİL,ÇOPUR HANİFİ,BALCI CEMAL,YASAN İLKER
|
Thermal and Mechanical Analysis of PM Assisted Synchronous Reluctance Motor for Washing Machines
ELECO 2017 10th International Conference on Electrical and Electronics Engineering, Bursa/TÜRKİYE, 30 Kasım 2017
LİRİDON XHELADİNİ,TAP ALPER,İMERYÜZ MURAT,AŞAN TAŞDEMİR,YILMAZ MURAT,ERGENE LALE
|
The Effect of Mechanical Properties on Performance of Diamond Wire Machines
The Fifth Thailand Symposium on Rock Mechanics- Thairock 2015, bangkok/TAYLAND, Vol. 389, No. 395, 22 Ocak 2015
TUMAÇ DENİZ,AVUNDUK EMRE,BAŞYİĞİT MİKAİL,ÇOPUR HANİFİ,SELMAN ER,BALCI CEMAL
|
Experimental Comparison of Single and Double Scroll Cutting Patterns by Using Chisel Cutting Tools of chain Saw Machines
Rock Characterisation, Modelling and Engineering Design Methods - Sinorock2013, 18 Haziran 2013
AVUNDUK E., TUMAC D., COPUR H., BALCİ C, BİLGİN N.,
|
Full Scale Linear Cutting tests towords Performance Prediction of Chain Saw Machines
Proc. of the 20th International Mining Congress and Exhibition- IMCET 2007, 6 Haziran 2007, s. 161-169
ÇOPUR HANİFİ,BALCI CEMAL,BİLGİN NUH,TUMAÇ DENİZ,İLKE DÜZYOL
|
Design and analysis of a permanent magnet synchronous motor for elevator applications
2017 International Conference on Optimization of Electrical and Electronic Equipment (OPTIM) 2017 Intl Aegean Conference on Electrical Machines and Power Electronics (ACEMP), 25 Mayıs 2017
BAKHTİARZADEH HOSEİN,POLAT ABDULLAH,ERGENE LALE
|
Static dynamic and mixed eccentricity of induction motor
2015 IEEE 10th International Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives (SDEMPED), Guarda/PORTEKİZ, 1 Eylül 2015, s. 284-288
POLAT ABDULLAH,DÖNMEZER YASEMİN,ERGENE LALE
|
Diagnosis of Different Eccentricity Faults in Induction Motors Based on Electrical and Magnetic Signatures and Unbalanced Magnetic Pull
The Joint Conference 2019 International Conference on Optimization of Electrical and Electronic Equipment 2019 Intl Aegean Conference on Electrical Machines and Power Electronics (OPTIM- ACEMP),, 27 Ağustos 2019
SARIKAYA ALP,POLAT ABDULLAH,ERGENE LALE
|
Physico Mechanical Property Tests Towards Performance Prediction of Chain Saw Machines
The Fifth Thailand Symposium on Rock Mechanics- Thairock 2015, Bangkok/TAYLAND, Vol. 381, No. 387, 22 Ocak 2015
TUMAÇ DENİZ,AVUNDUK EMRE,BAŞYİĞİT MİKAİL,ÇOPUR HANİFİ,BALCI CEMAL,SELMAN ER
|
A Multi parameter analysis for rotor design of synchronous reluctance motors
INTERNATIONAL CONFEENCE ON ELECTRICAL MACHINES ICEM 2016, Lozan/İSVİÇRE, 4 Eylül 2016
ÖZÇELİK NEZİH GÖKHAN,DOĞRU UĞUR EMRE,GEDİK HAKAN,İMERYÜZ MURAT,ERGENE LALE
|
Cutting Performance of Chain Saw and Diamond Wire Machines in Beige Marble Quarry
8th Asian Rock Mechanics Symposium-ARMS8, s. 6
AVUNDUK EMRE,TUMAÇ DENİZ,BAŞYİĞİT MİKAİL,ER SELMAN,ÇOPUR HANİFİ,BALCI CEMAL
|
Effects of the rotor design parameters on the torque production of a PMaSynRM for washing machine applications
2017 International Conference on Optimization of Electrical and Electronic Equipment (OPTIM) 2017 Intl Aegean Conference on Electrical Machines and Power Electronics (ACEMP), 25 Mayıs 2017
TAP ALPER,XHELADİNİ LİRİDON,ASAN TASDEMİR,İMERYÜZ MURAT,YILMAZ MURAT,ERGENE LALE
|
Thermal and Mechanical Analysis of PM Assisted Synchronous Reluctance Motor for Washing Machines
International Conference on Electrical and Electronics Engineering, ELECO 2017, Bursa/TÜRKİYE, 30 Kasım 2017
XHELADİNİ LİRİDON,TAP ALPER,İMERYÜZ MURAT,AŞAN TAŞDEMİR,YILMAZ MURAT,ERGENE LALE
|
MPPT Based Adaptive Control Algorithm for Small Scale Wind Energy Conversion Systems with PMSG
The Joint Conference 2019 International Conference on Optimization of Electrical and Electronic Equipment 2019 Intl Aegean Conference on Electrical Machines and Power Electronics (OPTIM- ACEMP), İSTANBUL/TÜRKİYE, 27 Ağustos 2019
AKKAYA MUHAMMED CİHAD,POLAT ABDULLAH,ERGENE LALE
|
Effects of the rotor design parameters on the torque production of a PMaSynRM for washing machine applications
2017 International Conference on Optimization of Electrical and Electronic Equipment (OPTIM) 2017 Intl Aegean Conference on Electrical Machines and Power Electronics (ACEMP), 25 Mayıs 2017
TAP ALPER,LİRİDON XHELADİNİ,AŞAN TAŞDEMİR,İMERYÜZ MURAT,YILMAZ MURAT,ERGENE LALE
|
Estimation of the Performance of Chain Saw Machines from Shore hardness and the other mechanical Properties
Rock Characterisation, Modelling and Engineering Design Methods - Sinorock2013, 18 Haziran 2013
TUMAÇ DENİZ,AVUNDUK EMRE,ÇOPUR HANİFİ,BİLGİN NUH,BALCI CEMAL
|
Polarization Effect on Iron Losses in Induction Motors
XVII International Conference on Electrical Machines ICEM 2006, CHANIA, GİRİT/YUNANİSTAN, 2 Eylül 2006
ERGENE LALE,SALON SHEPPARD J,DEGENEFF RC
|
Design and Analysis of an SRM for a Hybrid Electrical Vehicle
XVII International Conference on Electrical Machines (ICEM 2006), CHANIA, GİRİT/YUNANİSTAN, 2 Eylül 2006
MOON J,SALON SHEPPARD J,ERGENE LALE
|