Investigation of Residual Stresses Induced by Milling of Compacted Graphite Iron by x-ray Diffraction Technique
Journal of Materials Engineering and Performance, Kasım 2023, s. 1-10, ISSN: 1059-9495
KARA MEHMET EMRE, KUZU ALİ TANER, BAKKAL MUSTAFA
@article{article,
author = {Kara Mehmet Emre, KUZU ALİ TANER, BAKKAL MUSTAFA},
title = {Investigation of Residual Stresses Induced by Milling of Compacted Graphite Iron by x-ray Diffraction Technique},
journal = {Journal of Materials Engineering and Performance},
year = 2023,
pages = {1-10},
month = 11
}
|
Konu
Yayın ile ilgili açıklama girilmemiştir.
|
Tribo-corrosion behavior of electroplating, nitrocarburizing, and QPQ processes on barrel finishing
Materials Testing, Vol. 65, Ekim 2023, ISSN: 0025-5300
YÜCEL AYSU HANDE, YILMAZ ALPER, BAKKAL MUSTAFA, KUZU ALİ TANER
@article{article,
author = {YÜCEL AYSU HANDE, YILMAZ ALPER, BAKKAL MUSTAFA, KUZU ALİ TANER},
title = {Tribo-corrosion behavior of electroplating, nitrocarburizing, and QPQ processes on barrel finishing},
journal = {Materials Testing},
year = 2023,
month = 10,
volume = 65
}
|
Konu
Yayın ile ilgili açıklama girilmemiştir.
|
The development of a hybrid cutting model for workpiece temperature distribution via advection heat partition approach
Springer Science and Business Media LLC, Vol. 126, Nisan 2023, s. 4283-4295, ISSN: 0268-3768
KARA MEHMET EMRE, KUZU ALİ TANER, BAKKAL MUSTAFA
@article{article,
author = {Kara Mehmet Emre, KUZU ALİ TANER, BAKKAL MUSTAFA},
title = {The development of a hybrid cutting model for workpiece temperature distribution via advection heat partition approach},
journal = {Springer Science and Business Media LLC},
year = 2023,
pages = {4283-4295},
month = 4,
volume = 126
}
|
Konu
Yayın ile ilgili açıklama girilmemiştir.
|
Fatigue behavior and self-heating mechanism of novel glass fiber reinforced thermoplastic composite
Advanced Composite Materials, Vol. 32, Şubat 2023, s. 1-17, ISSN: 0924-3046
BAKKAL MUSTAFA, KAYIHAN METE, TİMUR AZMİ, PARLAR ZEYNEP, GÜLERYÜZ PARASIZ CANAN GAMZE, YÜCEL AYSU HANDE, PALABIYIK İBRAHİM MEHMET, GÜLMEZ TURGUT
@article{article,
author = {BAKKAL MUSTAFA, KAYIHAN METE, TİMUR AZMİ, PARLAR ZEYNEP, GÜLERYÜZ PARASIZ CANAN GAMZE, YÜCEL AYSU HANDE, PALABIYIK İBRAHİM MEHMET, GÜLMEZ TURGUT},
title = {Fatigue behavior and self-heating mechanism of novel glass fiber reinforced thermoplastic composite},
journal = {Advanced Composite Materials},
year = 2023,
pages = {1-17},
month = 2,
volume = 32
}
|
Konu
Yayın ile ilgili açıklama girilmemiştir.
|
NUMERICAL INVESTIGATION OF T6 HEAT TREATMENT FOR A7075 HOT FORGING
AND EXPERIMENTAL VERIFICATION
The 4th International Conference of Materials and Engineering Technology (TICMET'22), İstanbul/TÜRKİYE, 8 Eylül 2022
TOK GÖRKEM, BAKKAL MUSTAFA
@inproceedings{inproceedings,
author = {Tok Görkem, BAKKAL MUSTAFA},
title = {NUMERICAL INVESTIGATION OF T6 HEAT TREATMENT FOR A7075 HOT FORGING
AND EXPERIMENTAL VERIFICATION},
year = 2022,
month = 9
}
|
Konu
Yayın ile ilgili açıklama girilmemiştir.
|
Efficiency Improvement through Lean Manufacturing and Problem-Solving Techniques
The 4th International Conference of Materials and Engineering Technology (TICMET'22), İstanbul/TÜRKİYE, 8 Eylül 2022
ÇELİK DİLAN, KUZU MEHMET HADİ, KARANFİL UMUT, UYGUN CAN DENİZ, SUFİOĞLU ÖNER, DÖKMECİ MERT, AZ ERDEM, BAKKAL MUSTAFA
@inproceedings{inproceedings,
author = {Çelik Dilan, Kuzu Mehmet Hadi, Karanfil Umut, Uygun Can Deniz, Sufioğlu Öner, Dökmeci Mert, Az Erdem, BAKKAL MUSTAFA},
title = {Efficiency Improvement through Lean Manufacturing and Problem-Solving Techniques},
year = 2022,
month = 9
}
|
Konu
Yayın ile ilgili açıklama girilmemiştir.
|
Metal/kompozit hibrit bağlantılarda yüzey işlemlerinin ara yüzey dayanımına etkisi
Journal of the Faculty of Engineering and Architecture of Gazi University, Vol. 37, No. 2, Eylül 2022, s. 1033-1045, ISSN: 1300-1884
BAKKAL MUSTAFA, OSMANOĞLU HANDE, BODUR MEHMET SAFA
@article{article,
author = {BAKKAL MUSTAFA, Osmanoğlu Hande, BODUR MEHMET SAFA},
title = {Metal/kompozit hibrit bağlantılarda yüzey işlemlerinin ara yüzey dayanımına etkisi},
journal = {Journal of the Faculty of Engineering and Architecture of Gazi University},
year = 2022,
number = 2,
pages = {1033-1045},
month = 9,
volume = 37
}
|
Konu
Yayın ile ilgili açıklama girilmemiştir.
|
ON THE FINITE ELEMENT MODELING BEST PRACTICES FOR THE METAL
CUTTING SIMULATIONS
19 th INTERNATIONAL CONFERENCE ON MACHINE DESIGN AND PRODUCTION, Nevşehir/TÜRKİYE, 31 Ağustos 2022
HATİPOĞLU ERSEN, BAKKAL MUSTAFA, BUDAK ERHAN
@inproceedings{inproceedings,
author = {Hatipoğlu Ersen, BAKKAL MUSTAFA, BUDAK ERHAN},
title = {ON THE FINITE ELEMENT MODELING BEST PRACTICES FOR THE METAL
CUTTING SIMULATIONS},
year = 2022,
month = 8
}
|
Konu
Yayın ile ilgili açıklama girilmemiştir.
|
Examination of water uptake performance and mechanical properties of PLA/flax fiber biocomposites with the coupling agent
Synsint Research Group, Vol. 2, No. 2, Nisan 2022, s. 55-61, ISSN: 2564-0186
AVCI ALİ, AKDOĞAN EKER AYŞEGÜL, BAKKAL MUSTAFA, BODUR MEHMET SAFA
@article{article,
author = {AVCI ALİ, AKDOĞAN EKER AYŞEGÜL, BAKKAL MUSTAFA, BODUR MEHMET SAFA},
title = {Examination of water uptake performance and mechanical properties of PLA/flax fiber biocomposites with the coupling agent},
journal = {Synsint Research Group},
year = 2022,
number = 2,
pages = {55-61},
month = 4,
volume = 2
}
|
Konu
Yayın ile ilgili açıklama girilmemiştir.
|
Backward tube spinning mechanics
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol. 123, Ocak 2022, s. 479-491, ISSN: 0268-3768
SARİYARLİOGLU EREN CAN, MUSIC ÖMER, BAKKAL MUSTAFA
@article{article,
author = {Sariyarlioglu Eren Can, MUSIC ÖMER, BAKKAL MUSTAFA},
title = {Backward tube spinning mechanics},
journal = {INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY},
year = 2022,
pages = {479-491},
month = 1,
volume = 123
}
|
Konu
Yayın ile ilgili açıklama girilmemiştir.
|
Temperature variation depending on cutting conditions and its effects on thrust force in micro-drilling of CFRP laminates
Inderscience Publishers, Vol. 65, No. 2, Ocak 2022, s. 152-168, ISSN: 0268-1900
DOĞRUSADIK AHMET, KENTLİ AYKUT, BAKKAL MUSTAFA, ÇAKAN MURAT
@article{article,
author = {DOĞRUSADIK AHMET, KENTLİ AYKUT, BAKKAL MUSTAFA, ÇAKAN MURAT},
title = {Temperature variation depending on cutting conditions and its effects on thrust force in micro-drilling of CFRP laminates},
journal = {Inderscience Publishers},
year = 2022,
number = 2,
pages = {152-168},
month = 1,
volume = 65
}
|
Konu
Yayın ile ilgili açıklama girilmemiştir.
|
Mühendislik Malzemeleri için İmalat Yöntemleri
İstanbul/TÜRKİYE, 2022, Litaratür yayıncılık
BAKKAL MUSTAFA, DERİN CEVAT BORA, KARAGÜZEL UMUT, KUZU ALİ TANER, TRABZON LEVENT, TABANLI RAMAZAN MURAT, DEMİRKOL MEHMET, GENEL KENAN
@book{book,
author = {BAKKAL MUSTAFA, DERİN CEVAT BORA, KARAGÜZEL UMUT, KUZU ALİ TANER, TRABZON LEVENT, TABANLI RAMAZAN MURAT, DEMİRKOL MEHMET, GENEL KENAN},
title = {Mühendislik Malzemeleri için İmalat Yöntemleri},
year = 2022,
publisher = {Litaratür yayıncılık}
}
|
Konu
Yayın ile ilgili açıklama girilmemiştir.
|
INVESTIGATION OF METHODOLOGICAL VIBRATIONAL
CHARACTERISTIC OF CIRCULAR SAW
11th International Congress of Machining, 9 Aralık 2021, s. 325-331
TANRIVERDİ MUAMMER, AZ ERDEM, YILMAZ MAHMUT, BAKKAL MUSTAFA
@inproceedings{inproceedings,
author = {Tanrıverdi Muammer, Az Erdem, Yılmaz Mahmut, BAKKAL MUSTAFA},
title = {INVESTIGATION OF METHODOLOGICAL VIBRATIONAL
CHARACTERISTIC OF CIRCULAR SAW},
year = 2021,
pages = {325-331},
month = 12
}
|
Konu
Yayın ile ilgili açıklama girilmemiştir.
|
5 EKSENLİ ALÜMİNYUM CNC İŞLEME TEZGÂHININ DİNAMİK
YAPISININ İNCELENMESİ
11th International Congress of Machining, 9 Aralık 2021, s. 273-286
BAKKAL MUSTAFA, PEHLİVAN TOPRAK, ÇEKİR SEYFEDDİN, ALGIR AYŞENUR, YETER ALPER, AZ ERDEM, KARAGÜZEL UMUT, ÖZŞAHİN ORKUN
@inproceedings{inproceedings,
author = {BAKKAL MUSTAFA, Pehlivan Toprak, Çekir Seyfeddin, Algır Ayşenur, Yeter Alper, Az Erdem, KARAGÜZEL UMUT, ÖZŞAHİN ORKUN},
title = {5 EKSENLİ ALÜMİNYUM CNC İŞLEME TEZGÂHININ DİNAMİK
YAPISININ İNCELENMESİ},
year = 2021,
pages = {273-286},
month = 12
}
|
Konu
Yayın ile ilgili açıklama girilmemiştir.
|
BÜYÜK VERİ VE YAPAY ZEKA UYGULAMALARI İLE CNC TEZGAH
SAĞLIĞI TAKİBİ VE YÖNETİMİ
11th INTERNATIONAL CONGRESS ON MACHINING PROGRAMME, 9 Aralık 2021, s. 171-180
BAKKAL MUSTAFA, VURAL MİRAÇ EKİM, YURTSEVER TAYLAN, MERDOL ŞÜKRÜ DORUK, ÇAKIR MUAMMER ALTAN
@inproceedings{inproceedings,
author = {BAKKAL MUSTAFA, Vural Miraç Ekim, Yurtsever Taylan, Merdol Şükrü Doruk, ÇAKIR MUAMMER ALTAN},
title = {BÜYÜK VERİ VE YAPAY ZEKA UYGULAMALARI İLE CNC TEZGAH
SAĞLIĞI TAKİBİ VE YÖNETİMİ},
year = 2021,
pages = {171-180},
month = 12
}
|
Konu
Yayın ile ilgili açıklama girilmemiştir.
|
BÜYÜK VERİ VE YAPAY ZEKA UYGULAMALARI İLE CNC TEZGAH SAĞLIĞI TAKİBİ VE YÖN
11th International Congress of Machining, 9 Kasım 2021
BAKKAL MUSTAFA, VURAL MİRAÇ EKİM, YURTSEVER TAYLAN, MERDOL ŞÜKRÜ DORUK, ÇAKIR MUAMMER ALTAN
@inproceedings{inproceedings,
author = {BAKKAL MUSTAFA, Vural Miraç Ekim, Yurtsever Taylan, Merdol Şükrü Doruk, ÇAKIR MUAMMER ALTAN},
title = {BÜYÜK VERİ VE YAPAY ZEKA UYGULAMALARI İLE CNC TEZGAH SAĞLIĞI TAKİBİ VE YÖN},
year = 2021,
month = 11
}
|
Konu
Yayın ile ilgili açıklama girilmemiştir.
|
BMG DELİK DELME PROSESİNDE SICAKLIK MODELLEMESİ
The 3rd International Conference of Materials and Engineering Technology (TICMET'21), Gaziantep/TÜRKİYE, 3 Kasım 2021, s. 134-138
TİMUR AZMİ, KÖSEMEN NURAFŞAN ELİF, TÜRKMEN AYBÜKE, KÖSEMEN ELİFNUR, BAKKAL MUSTAFA
@inproceedings{inproceedings,
author = {TİMUR AZMİ, Kösemen Nurafşan Elif, Türkmen Aybüke, Kösemen Elifnur, BAKKAL MUSTAFA},
title = {BMG DELİK DELME PROSESİNDE SICAKLIK MODELLEMESİ},
year = 2021,
pages = {134-138},
month = 11
}
|
Konu
Yayın ile ilgili açıklama girilmemiştir.
|
MATERIAL REPLACEMENT AND TOPOLOGY OPTIMIZATION STUDY ON A PVC
CUTTING MACHINE COMPONENT
The 3rd International Conference of Materials and Engineering Technology (TICMET'21), Gaziantep/TÜRKİYE, 3 Kasım 2021, s. 264-264
HANÇERKIRAN ZEYNEP, AHLATÇI UMUT CAN, TOPUZOĞLU ERTAN, KASAPÇOPUR TAYLAN, ALKAN ERKAN, ERTÜRK FİKRET, KARAGÜZEL UMUT, BAKKAL MUSTAFA
@inproceedings{inproceedings,
author = {Hançerkıran Zeynep, Ahlatçı Umut Can, Topuzoğlu Ertan, Kasapçopur Taylan, Alkan Erkan, Ertürk Fikret, KARAGÜZEL UMUT, BAKKAL MUSTAFA},
title = {MATERIAL REPLACEMENT AND TOPOLOGY OPTIMIZATION STUDY ON A PVC
CUTTING MACHINE COMPONENT},
year = 2021,
pages = {264-264},
month = 11
}
|
Konu
Yayın ile ilgili açıklama girilmemiştir.
|
ANALYSIS OF MECHANICAL BEHAVIOR OF TERMOPLASTIC
COMPOSITES
The 3rd International Conference of Materials and Engineering Technology (TICMET'21), Gaziantep/TÜRKİYE, 3 Kasım 2021, s. 265-265
YÜCEL AYSU HANDE, KÖSEMEN ELİFNUR, KUZU ALİ TANER, BAKKAL MUSTAFA
@inproceedings{inproceedings,
author = {YÜCEL AYSU HANDE, Kösemen Elifnur, KUZU ALİ TANER, BAKKAL MUSTAFA},
title = {ANALYSIS OF MECHANICAL BEHAVIOR OF TERMOPLASTIC
COMPOSITES},
year = 2021,
pages = {265-265},
month = 11
}
|
Konu
Yayın ile ilgili açıklama girilmemiştir.
|
Analysis of Tube Spinning
13th International Conference on the Technology of Plasticity, ICTP 2021, 25 Temmuz 2021, ISSN: 23671181
SARIYARLIOĞLU EREN CAN, MUSIC ÖMER, BAKKAL MUSTAFA
@inproceedings{inproceedings,
author = {Sarıyarlıoğlu Eren Can, MUSIC ÖMER, BAKKAL MUSTAFA},
title = {Analysis of Tube Spinning},
year = 2021,
month = 7
}
|
Konu
Yayın ile ilgili açıklama girilmemiştir.
|
Effect of scanning strategies and laser parameters on metal-composite joining
Materials and Manufacturing Processes, Nisan 2021, s. 1199-1207, ISSN: 1042-6914
KUZU ALİ TANER, KARAGÜZEL UMUT, ERBAY BATIRAY, BAKKAL MUSTAFA
@article{article,
author = {KUZU ALİ TANER, KARAGÜZEL UMUT, Erbay Batıray, BAKKAL MUSTAFA},
title = {Effect of scanning strategies and laser parameters on metal-composite joining},
journal = {Materials and Manufacturing Processes},
year = 2021,
pages = {1199-1207},
month = 4
}
|
Konu
Yayın ile ilgili açıklama girilmemiştir.
|
Photostabilizers performance on the surface analysis of green composites
Polymers and Polymer Composites, Vol. 29, No. 1, Şubat 2021, s. 57-64, ISSN: 1478-2391
SONMEZ HASRET ECE, BODUR MEHMET SAFA, BAYSAN ALPER ADRİAN, BAKKAL MUSTAFA, SERHATLI İBRAHİM ERSİN
@article{article,
author = {Sonmez Hasret Ece, BODUR MEHMET SAFA, Baysan Alper Adrian, BAKKAL MUSTAFA, SERHATLI İBRAHİM ERSİN},
title = {Photostabilizers performance on the surface analysis of green composites},
journal = {Polymers and Polymer Composites},
year = 2021,
number = 1,
pages = {57-64},
month = 2,
volume = 29
}
|
Konu
Yayın ile ilgili açıklama girilmemiştir.
|
Experimental analysis on drilling of Al/Ti/CFRP hybrid composites
Materials and Manufacturing Processes, Vol. 36, No. 2, Ocak 2021, s. 215-222, ISSN: 1042-6914
KAYIHAN METE, KARAGÜZEL UMUT, BAKKAL MUSTAFA
@article{article,
author = {KAYIHAN METE, KARAGÜZEL UMUT, BAKKAL MUSTAFA},
title = {Experimental analysis on drilling of Al/Ti/CFRP hybrid composites},
journal = {Materials and Manufacturing Processes},
year = 2021,
number = 2,
pages = {215-222},
month = 1,
volume = 36
}
|
Konu
Yayın ile ilgili açıklama girilmemiştir.
|
Photostabilizers performance on the surface analysis of green composites
POLYMERS & POLYMER COMPOSITES, Vol. 29, No. 1, Ocak 2021, s. 57-64, ISSN: 0967-3911
BODUR MEHMET SAFA, SÖNMEZ HASRET ECE, BAYSAN ALPER ADRİAN, BAKKAL MUSTAFA, SERHATLI İBRAHİM ERSİN
@article{article,
author = {BODUR MEHMET SAFA, Sönmez Hasret Ece, Baysan Alper Adrian, BAKKAL MUSTAFA, SERHATLI İBRAHİM ERSİN},
title = {Photostabilizers performance on the surface analysis of green composites},
journal = {POLYMERS & POLYMER COMPOSITES},
year = 2021,
number = 1,
pages = {57-64},
month = 1,
volume = 29
}
|
Konu
Yayın ile ilgili açıklama girilmemiştir.
|
Experimental analysis on drilling of Al/Ti/CFRP hybrid composites
Materials and Manufacturing Processes, Eylül 2020, ISSN: 1042-6914","1532-2475
KAYIHAN METE, KARAGÜZEL UMUT, BAKKAL MUSTAFA
@article{article,
author = {KAYIHAN METE, KARAGÜZEL UMUT, BAKKAL MUSTAFA},
title = {Experimental analysis on drilling of Al/Ti/CFRP hybrid composites},
journal = {Materials and Manufacturing Processes},
year = 2020,
month = 9
}
|
Konu
Yayın ile ilgili açıklama girilmemiştir.
|
Sıcak Dövme Kalıplarına Infrared (Kızıl Ötesi) Yöntemi ile Ön Isıtma Uygulanmasına Yönelik Deneysel ve Teorik Analiz
Makina Tasarım ve İmalat Dergisi, Vol. 18, No. 1, Eylül 2020, s. 9-23, ISSN: 1302-9487
KARAGÜZEL UMUT, KUZU ALİ TANER, KORAP VEDAT, ÇİLİNGİR HASAN, BAKKAL MUSTAFA
@article{article,
author = {KARAGÜZEL UMUT, KUZU ALİ TANER, Korap Vedat, Çilingir Hasan, BAKKAL MUSTAFA},
title = {Sıcak Dövme Kalıplarına Infrared (Kızıl Ötesi) Yöntemi ile Ön Isıtma Uygulanmasına Yönelik Deneysel ve Teorik Analiz},
journal = {Makina Tasarım ve İmalat Dergisi},
year = 2020,
number = 1,
pages = {9-23},
month = 9,
volume = 18
}
|
Konu
Yayın ile ilgili açıklama girilmemiştir.
|
EXPERIMENTAL AND ANALYTICAL INVESTIGATION OF DRILLING IN HIGH PERFORMANCE HYBRID COMPOSITES
10th International Congress on Machining, Antalya/TÜRKİYE, 7 Kasım 2019
KAYIHAN METE,KARAGÜZEL UMUT,BAKKAL MUSTAFA
@inproceedings{inproceedings,
author = {KAYIHAN METE,KARAGÜZEL UMUT,BAKKAL MUSTAFA},
title = {EXPERIMENTAL AND ANALYTICAL INVESTIGATION OF DRILLING IN HIGH PERFORMANCE HYBRID COMPOSITES},
year = 2019,
month = 11
}
|
Konu
Yayın ile ilgili açıklama girilmemiştir.
|
ÖZEL GRAFİTLERİN DELİK DELME İŞLEMiNİN İNCELENMESİ
10th International Congress on Machining, Antalya/TÜRKİYE, 7 Kasım 2019
YILDIZ MUSTAFA,KUZU ALİ TANER,KAYIHAN METE,YEŞİLOVA AYSU HANDE,BAKKAL MUSTAFA
@inproceedings{inproceedings,
author = {Yıldız Mustafa,KUZU ALİ TANER,KAYIHAN METE,YEŞİLOVA AYSU HANDE,BAKKAL MUSTAFA},
title = {ÖZEL GRAFİTLERİN DELİK DELME İŞLEMiNİN İNCELENMESİ},
year = 2019,
month = 11
}
|
Konu
Yayın ile ilgili açıklama girilmemiştir.
|
ALÜMİNYUM PROFİL KESME TEZGAHININ YAPISAL VE DİNAMİK PERFORMANSININ İYİLEŞTİRİLMESİ
10th International Congress on Machining, Antalya/TÜRKİYE, 7 Kasım 2019
TANRIVERDİ MUAMMER,YILMAZ MAHMUT,ÇELİK ERAY,KUZU ALİ TANER,BAKKAL MUSTAFA
@inproceedings{inproceedings,
author = {Tanrıverdi Muammer,Yılmaz Mahmut,Çelik Eray,KUZU ALİ TANER,BAKKAL MUSTAFA},
title = {ALÜMİNYUM PROFİL KESME TEZGAHININ YAPISAL VE DİNAMİK PERFORMANSININ İYİLEŞTİRİLMESİ},
year = 2019,
month = 11
}
|
Konu
Yayın ile ilgili açıklama girilmemiştir.
|
EVALUATION OF GEOMETRICAL DEVIATIONS AND POROSITIESON BOTH CFRP AND AISI 316L STEEL MATERIAL ON ADDITIVEMANUFACTURING
Additive Manufacturing Conference 2019, 17 Ekim 2019, s. 155-160
YEŞİLOVA AYSU HANDE,TİMUR AZMİ,BAKKAL MUSTAFA
@inproceedings{inproceedings,
author = {YEŞİLOVA AYSU HANDE,TİMUR AZMİ,BAKKAL MUSTAFA},
title = {EVALUATION OF GEOMETRICAL DEVIATIONS AND POROSITIESON BOTH CFRP AND AISI 316L STEEL MATERIAL ON ADDITIVEMANUFACTURING},
year = 2019,
pages = {155-160},
month = 10
}
|
Konu
Yayın ile ilgili açıklama girilmemiştir.
|
AL 7075 PVC ISITICI YUZEYINE AKIMSIZ NI B PTFE ILE NANOKOMPOZIT KAPLAMA UYGULAMASI
The International Conference of Materials and Engineering Technology (TICMET’19), Gaziantep/TÜRKİYE, 10 Ekim 2019
BAKKAL MUSTAFA,KARAGÜZEL UMUT,YILMAZ MAHMUT,ÇELİK ERAY,YÜCETÜRK BERKAY,DURULMUŞ E İREM,ERTÜRK FİKRET
@inproceedings{inproceedings,
author = {BAKKAL MUSTAFA,KARAGÜZEL UMUT,Yılmaz Mahmut,Çelik Eray,YÜCETÜRK Berkay,DURULMUŞ E İREM,ERTÜRK FİKRET},
title = {AL 7075 PVC ISITICI YUZEYINE AKIMSIZ NI B PTFE ILE NANOKOMPOZIT KAPLAMA UYGULAMASI},
year = 2019,
month = 10
}
|
Konu
Yayın ile ilgili açıklama girilmemiştir.
|
Building a new bridge between University-Industry collaboration: An engineering design case study
3rd Annual International Conference on Mechanical Engineering, ATİNA/YUNANİSTAN, 22 Temmuz 2019
BAKKAL MUSTAFA,KUZU ALİ TANER,TİMUR AZMİ,KAYIHAN METE,ŞEŞEN MURAT,ATEŞ SELİN,YILMAZ MAHMUT,ÇELİK ERAY
@inproceedings{inproceedings,
author = {BAKKAL MUSTAFA,KUZU ALİ TANER,TİMUR AZMİ,KAYIHAN METE,Şeşen Murat,Ateş Selin,Yılmaz Mahmut,Çelik Eray},
title = {Building a new bridge between University-Industry collaboration: An engineering design case study},
year = 2019,
month = 7
}
|
Konu
Yayın ile ilgili açıklama girilmemiştir.
|
Young’s Modulus estimation techniques for the randomly oriented natural fiber reinforced composites: Finite Element Analysis and Analytical Models
Pamukkale University Journal of Engineering Sciences, Vol. 25, No. 4, Ocak 2019, s. 454-461, ISSN: 1300-7009
BODUR MEHMET SAFA,BAKKAL MUSTAFA
@article{article,
author = {BODUR MEHMET SAFA,BAKKAL MUSTAFA},
title = {Young’s Modulus estimation techniques for the randomly oriented natural fiber reinforced composites: Finite Element Analysis and Analytical Models},
journal = {Pamukkale University Journal of Engineering Sciences},
year = 2019,
number = 4,
pages = {454-461},
month = 1,
volume = 25
}
|
Konu
Yayın ile ilgili açıklama girilmemiştir.
|
Manufacturing Techniques of Bulk Metallic Glasses Modern Manufacturing Processes
2019, s. 137-148, Wiley
BAKKAL MUSTAFA,KARAGÜZEL UMUT,KUZU ALİ TANER
@book{book,
author = {BAKKAL MUSTAFA,KARAGÜZEL UMUT,KUZU ALİ TANER},
title = {Manufacturing Techniques of Bulk Metallic Glasses},
booktitle = {Modern Manufacturing Processes},
year = 2019,
pages = {137-148},
publisher = {Wiley}
}
|
Konu
Yayın ile ilgili açıklama girilmemiştir.
|
Frezeleme İşlemi Sırasında Takım ve İş Parçasından Eş Zamanlı Sıcaklık Ölçümü
Uluslararsı Talaşlı İmalat Sempozyumu, 8 Kasım 2018
ÇETİNKAYA HÜSEYİN,SÖNMEZ BURAK,AKSOY ÖVÜNÇ,BAKKAL MUSTAFA,KARAGÜZEL UMUT
@inproceedings{inproceedings,
author = {Çetinkaya Hüseyin,Sönmez Burak,Aksoy Övünç,BAKKAL MUSTAFA,KARAGÜZEL UMUT},
title = {Frezeleme İşlemi Sırasında Takım ve İş Parçasından Eş Zamanlı Sıcaklık Ölçümü},
year = 2018,
month = 11
}
|
Konu
Yayın ile ilgili açıklama girilmemiştir.
|
İNCE CİDARLI ABS PARÇALARIN FREZELENMESİNDE FARKLI KESME STRATEJİLERİ VE KESME PARAMETRELERİNİN OPTİMİZASYONU
9. Uluslararası Talaşlı İmalat Sempozyumu, 8 Kasım 2018
KEKLİK BURAK TAHA,KUZU ALİ TANER,KARAGÜZEL UMUT,KAYIHAN METE,BAKKAL MUSTAFA
@inproceedings{inproceedings,
author = {Keklik Burak Taha,KUZU ALİ TANER,KARAGÜZEL UMUT,KAYIHAN METE,BAKKAL MUSTAFA},
title = {İNCE CİDARLI ABS PARÇALARIN FREZELENMESİNDE FARKLI KESME STRATEJİLERİ VE KESME PARAMETRELERİNİN OPTİMİZASYONU},
year = 2018,
month = 11
}
|
Konu
Yayın ile ilgili açıklama girilmemiştir.
|
MEASUREMENT OF THE MILLING AND GRINDING INDUCED RESIDUAL STRESSES ON BULK METALLIC GLASS BY USING HOLE DRILLING METHOD9. Ulul
9. Uluslararası Talaşlı İmalat Sempozyumu, 8 Kasım 2018
YEŞİLOVA AYSU HANDE,AKDENİZ YÜKSEL,ÜNLÜ EMRE,TİMUR AZMİ,BAKKAL MUSTAFA
@inproceedings{inproceedings,
author = {YEŞİLOVA AYSU HANDE,Akdeniz Yüksel,Ünlü Emre,TİMUR AZMİ,BAKKAL MUSTAFA},
title = {MEASUREMENT OF THE MILLING AND GRINDING INDUCED RESIDUAL STRESSES ON BULK METALLIC GLASS BY USING HOLE DRILLING METHOD9. Ulul},
year = 2018,
month = 11
}
|
Konu
Yayın ile ilgili açıklama girilmemiştir.
|
A study on the photostabilizer additives on the textile fiber reinforced polymer composites: Mechanical, thermal, and physical analysis
POLYMER ENGINEERING AND SCIENCE, Vol. 58, No. 7, Temmuz 2018, s. 1082-1090, ISSN: 0032-3888
BODUR MEHMET SAFA,BAKKAL MUSTAFA,SONMEZ HASRET ECE
@article{article,
author = {BODUR MEHMET SAFA,BAKKAL MUSTAFA,Sonmez Hasret Ece},
title = {A study on the photostabilizer additives on the textile fiber reinforced polymer composites: Mechanical, thermal, and physical analysis},
journal = {POLYMER ENGINEERING AND SCIENCE},
year = 2018,
number = 7,
pages = {1082-1090},
month = 7,
volume = 58
}
|
Konu
Yayın ile ilgili açıklama girilmemiştir.
|
Dry and minimum quantity lubrication high-throughput drilling of compacted graphite iron
Machining Science and Technology, Vol. 22, No. 4, Şubat 2018, s. 652-670, ISSN: 1091-0344
WU WENWU,KUZU ALİ TANER,STEPHENSON DAVİD,HONG JUN,BAKKAL MUSTAFA,SHİH ALBERT J
@article{article,
author = {Wu Wenwu,KUZU ALİ TANER,Stephenson David,Hong Jun,BAKKAL MUSTAFA,Shih Albert J},
title = {Dry and minimum quantity lubrication high-throughput drilling of compacted graphite iron},
journal = {Machining Science and Technology},
year = 2018,
number = 4,
pages = {652-670},
month = 2,
volume = 22
}
|
Konu
Yayın ile ilgili açıklama girilmemiştir.
|
Investigation of temperature distribution in orthogonal cutting through dual-zone contact model on the rake face
The International Journal of Advanced Manufacturing Technology, Vol. 96, 2018, s. 81-89, ISSN: 0268-3768
CAKİR ESİN,OZLU EMRE,BAKKAL MUSTAFA,BUDAK ERHAN
@article{article,
author = {cakir esin,Ozlu Emre,BAKKAL MUSTAFA,BUDAK ERHAN},
title = {Investigation of temperature distribution in orthogonal cutting through dual-zone contact model on the rake face},
journal = {The International Journal of Advanced Manufacturing Technology},
year = 2018,
pages = {81-89},
volume = 96
}
|
Konu
Yayın ile ilgili açıklama girilmemiştir.
|
Water absorption behavior and kinetics of glass fiber/waste cotton fabric hybrid composites
Journal of Applied Polymer Science, Vol. 134, No. 47, Aralık 2017, ISSN: 00218995
BODUR MEHMET SAFA,ENGLUND KARL,BAKKAL MUSTAFA
@article{article,
author = {BODUR MEHMET SAFA,Englund Karl,BAKKAL MUSTAFA},
title = {Water absorption behavior and kinetics of glass fiber/waste cotton fabric hybrid composites},
journal = {Journal of Applied Polymer Science},
year = 2017,
number = 47,
month = 12,
volume = 134
}
|
Konu
Yayın ile ilgili açıklama girilmemiştir.
|
Effect Of Cutting Strategy On Machining Of Thin Walled Polymer
8th International Symposium On Machining, 2 Kasım 2017
KEKLİK BURAK,KUZU ALİ TANER,BAŞÇI ÜMİT G,KARAGÜZEL UMUT,KAYIHAN METE,BAKKAL MUSTAFA
@inproceedings{inproceedings,
author = {KEKLİK Burak,KUZU ALİ TANER,BAŞÇI Ümit G,KARAGÜZEL UMUT,Kayıhan Mete,BAKKAL MUSTAFA},
title = {Effect Of Cutting Strategy On Machining Of Thin Walled Polymer},
year = 2017,
month = 11
}
|
Konu
Yayın ile ilgili açıklama girilmemiştir.
|
Zirkonyum Esaslı Kalın Camsı Metalin Taşlanmasında Kesme Sıcaklıkları Ve Enerji Paylaşımı,
8th International Symposium On Machining, 2 Kasım 2017
TİMUR AZMİ,KARİPÇİN İLKER,KARAGÜZEL UMUT,KUZU ALİ TANER,BAKKAL MUSTAFA
@inproceedings{inproceedings,
author = {TİMUR AZMİ,Karipçin İlker,KARAGÜZEL UMUT,KUZU ALİ TANER,BAKKAL MUSTAFA},
title = {Zirkonyum Esaslı Kalın Camsı Metalin Taşlanmasında Kesme Sıcaklıkları Ve Enerji Paylaşımı,},
year = 2017,
month = 11
}
|
Konu
Yayın ile ilgili açıklama girilmemiştir.
|
The thermal modeling of deep-hole drilling process under MQL condition
Journal of Manufacturing Processes, Vol. 29, Ekim 2017, s. 194-203, ISSN: 1526-6125
KUZU ALİ TANER,BERENJİ KR,EKİM BC,BAKKAL MUSTAFA
@article{article,
author = {KUZU ALİ TANER,Berenji KR,Ekim BC,BAKKAL MUSTAFA},
title = {The thermal modeling of deep-hole drilling process under MQL condition},
journal = {Journal of Manufacturing Processes},
year = 2017,
pages = {194-203},
month = 10,
volume = 29
}
|
Konu
Yayın ile ilgili açıklama girilmemiştir.
|
Properties of Sound Panels Made from Recycled Footwear Treads
Acta Physica Polonica A, Vol. 132, Eylül 2017, s. 936-940, ISSN: 0587-4246
YILDIZ FATİH, PARLAR AYŞE GÜL, PARLAR ZEYNEP, BAKKAL MUSTAFA
@article{article,
author = {Yıldız Fatih, parlar Ayşe Gül, PARLAR ZEYNEP, BAKKAL MUSTAFA},
title = {Properties of Sound Panels Made from Recycled Footwear Treads},
journal = {Acta Physica Polonica A},
year = 2017,
pages = {936-940},
month = 9,
volume = 132
}
|
Konu
Yayın ile ilgili açıklama girilmemiştir.
|
frezeyle tornalamada takımda ortaya çıkan termal deformasyonların modellenmesi
Gazi Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi, Vol. 32, No. 3, Eylül 2017, ISSN: 1300-1884
BUDAK ERHAN,BAKKAL MUSTAFA,KARAGÜZEL UMUT
@article{article,
author = {BUDAK ERHAN,BAKKAL MUSTAFA,KARAGÜZEL UMUT},
title = {frezeyle tornalamada takımda ortaya çıkan termal deformasyonların modellenmesi},
journal = {Gazi Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi},
year = 2017,
number = 3,
month = 9,
volume = 32
}
|
Konu
Yayın ile ilgili açıklama girilmemiştir.
|
An investigation for the effect of recycled matrix on the properties of textile waste cotton fiber reinforced (T-FRP) composites
Polymer Composites, Vol. 38, No. 7, Temmuz 2017, s. 1231-1240, ISSN: 02728397
BODUR MEHMET SAFA,SONMEZ HASRET ECE,BAKKAL MUSTAFA
@article{article,
author = {BODUR MEHMET SAFA,Sonmez Hasret Ece,BAKKAL MUSTAFA},
title = {An investigation for the effect of recycled matrix on the properties of textile waste cotton fiber reinforced (T-FRP) composites},
journal = {Polymer Composites},
year = 2017,
number = 7,
pages = {1231-1240},
month = 7,
volume = 38
}
|
Konu
Yayın ile ilgili açıklama girilmemiştir.
|
Water Uptake Behavior of Waste Cotton/Glass Fiber Hybrid Composites
7th International Conference of Engineering and Applied Sciences (ICEAS – 2017), 27 Haziran 2017
BODUR MEHMET SAFA,BAKKAL MUSTAFA
@inproceedings{inproceedings,
author = {BODUR MEHMET SAFA,BAKKAL MUSTAFA},
title = {Water Uptake Behavior of Waste Cotton/Glass Fiber Hybrid Composites},
year = 2017,
month = 6
}
|
Konu
Yayın ile ilgili açıklama girilmemiştir.
|
Effect of Adhesive Bonding Connection on Durability and Damage Behavior of Long Fiber Reinforced Composites/Steel Assemblies
NWC 2017, 11 Haziran 2017
AKYOL ONUR,OTUZ OKAN,BAKKAL MUSTAFA,AŞKIN ERSİN,ALÇO ERSİN
@inproceedings{inproceedings,
author = {Akyol Onur,OTUZ Okan,BAKKAL MUSTAFA,Aşkın Ersin,Alço Ersin},
title = {Effect of Adhesive Bonding Connection on Durability and Damage Behavior of Long Fiber Reinforced Composites/Steel Assemblies},
year = 2017,
month = 6
}
|
Konu
Yayın ile ilgili açıklama girilmemiştir.
|
A New Analytical Calculation Method on Injection Molding Proces of Composite Luggage Rack Holder
The international VDI Congress, 29 Mart 2017
BAKKAL MUSTAFA,DOĞRU SAMİ,OTUZ OKAN
@inproceedings{inproceedings,
author = {BAKKAL MUSTAFA,Doğru Sami,OTUZ Okan},
title = {A New Analytical Calculation Method on Injection Molding Proces of Composite Luggage Rack Holder},
year = 2017,
month = 3
}
|
Konu
Yayın ile ilgili açıklama girilmemiştir.
|
Mechanical and Thermal Modeling of Orthogonal Turn-milling Operation
Procedia CIRP, Vol. 58, Ocak 2017, s. 287-292, ISSN: 22128271
KARAGÜZEL UMUT,BAKKAL MUSTAFA,BUDAK ERHAN
@article{article,
author = {KARAGÜZEL UMUT,BAKKAL MUSTAFA,BUDAK ERHAN},
title = {Mechanical and Thermal Modeling of Orthogonal Turn-milling Operation},
journal = {Procedia CIRP},
year = 2017,
pages = {287-292},
month = 1,
volume = 58
}
|
Konu
Yayın ile ilgili açıklama girilmemiştir.
|
Frezeyle Tornalama Takımında Ortaya Çıkan Termal Deformasyonların Modellenmesi
7th International Symposium on Machining, İstanbul/TÜRKİYE, 3 Kasım 2016, s. 73-81
KARAGÜZEL UMUT,BUDAK ERHAN,BAKKAL MUSTAFA
@inproceedings{inproceedings,
author = {KARAGÜZEL UMUT,BUDAK ERHAN,BAKKAL MUSTAFA},
title = {Frezeyle Tornalama Takımında Ortaya Çıkan Termal Deformasyonların Modellenmesi},
year = 2016,
pages = {73-81},
month = 11
}
|
Konu
Yayın ile ilgili açıklama girilmemiştir.
|
Delik Delme İşleminde Soğutma Koşullarının Takım ve İş Parçası Sıcaklıklarına Olan Etkisinin Araştırılması
7th International Symposium on Machining, İstanbul/TÜRKİYE, 3 Kasım 2016, s. 203-213
KUZU ALİ TANER,BERENJİ KAVEH R,BAKKAL MUSTAFA
@inproceedings{inproceedings,
author = {KUZU ALİ TANER,Berenji Kaveh R,BAKKAL MUSTAFA},
title = {Delik Delme İşleminde Soğutma Koşullarının Takım ve İş Parçası Sıcaklıklarına Olan Etkisinin Araştırılması},
year = 2016,
pages = {203-213},
month = 11
}
|
Konu
Yayın ile ilgili açıklama girilmemiştir.
|
Glass Fiber Waste Cotton Fabric Reinforced Hybrid Composites Mechanical Investigations
3rd International Conference onMechanical, Materials and Manufacturing(ICMMM 2016), Savannah/AMERİKA BİRLEŞİK DEVLETLERİ, 26 Ekim 2016
BODUR MEHMET SAFA,ENGLUND KARL,BAKKAL MUSTAFA
@inproceedings{inproceedings,
author = {BODUR MEHMET SAFA,Englund Karl,BAKKAL MUSTAFA},
title = {Glass Fiber Waste Cotton Fabric Reinforced Hybrid Composites Mechanical Investigations},
year = 2016,
month = 10
}
|
Konu
Yayın ile ilgili açıklama girilmemiştir.
|
Sound Panel Application by Using Recycled Footwear Tread
ICCESEN 2016, 19 Ekim 2016
YILDIZ FATİH,PARLAR AYŞE GÜL,PARLAR ZEYNEP,BAKKAL MUSTAFA
@inproceedings{inproceedings,
author = {Yıldız Fatih,Parlar Ayşe Gül,PARLAR ZEYNEP,BAKKAL MUSTAFA},
title = {Sound Panel Application by Using Recycled Footwear Tread},
year = 2016,
month = 10
}
|
Konu
Yayın ile ilgili açıklama girilmemiştir.
|
An Experimental Study of Residual Stresses in Drilling of Compacted Graphite Iron
Thirteenth International Conference on HIGH SPEED MACHINING (HSM) 2016,, Metz/FRANSA, 4 Ekim 2016
BERENJİ KAVEH R,KUZU ALİ TANER,BAKKAL MUSTAFA
@inproceedings{inproceedings,
author = {Berenji Kaveh R,KUZU ALİ TANER,BAKKAL MUSTAFA},
title = {An Experimental Study of Residual Stresses in Drilling of Compacted Graphite Iron},
year = 2016,
month = 10
}
|
Konu
Yayın ile ilgili açıklama girilmemiştir.
|
The effects of different chemical treatment methods on the mechanical and thermal properties of textile fiber reinforced polymer composites
Journal of Composite Materials, Vol. 50, No. 27, Ekim 2016, s. 3817-3830, ISSN: 0021-9983
BODUR MEHMET SAFA,BAKKAL MUSTAFA,SÖNMEZ HASRET ECE
@article{article,
author = {BODUR MEHMET SAFA,BAKKAL MUSTAFA,Sönmez Hasret Ece},
title = {The effects of different chemical treatment methods on the mechanical and thermal properties of textile fiber reinforced polymer composites},
journal = {Journal of Composite Materials},
year = 2016,
number = 27,
pages = {3817-3830},
month = 10,
volume = 50
}
|
Konu
Yayın ile ilgili açıklama girilmemiştir.
|
A HYBRID FE AND CFD MODEL TO PREDICT THE TOOL TEMPERATURE DISTRIBUTION IN CO2 ASSISTED CGI DRILLING
16th International Conference on Machine Design and Production (UMTIK 2016), Bursa/TÜRKİYE, 12 Temmuz 2016
KUZU ALİ TANER,BERENJİ KAVEH R,BAKKAL MUSTAFA
@inproceedings{inproceedings,
author = {KUZU ALİ TANER,Berenji Kaveh R,BAKKAL MUSTAFA},
title = {A HYBRID FE AND CFD MODEL TO PREDICT THE TOOL TEMPERATURE DISTRIBUTION IN CO2 ASSISTED CGI DRILLING},
year = 2016,
month = 7
}
|
Konu
Yayın ile ilgili açıklama girilmemiştir.
|
The effect of chemical treatment methods on the outdoor performance of waste textile fiber-reinforced polymer composites
Journal of Composite Materials, Vol. 51, No. 14, Temmuz 2016, s. 2009-2021, ISSN: 0021-9983
BAKKAL MUSTAFA,BODUR MEHMET SAFA,SONMEZ HASRET ECE
@article{article,
author = {BAKKAL MUSTAFA,BODUR MEHMET SAFA,Sonmez Hasret Ece},
title = {The effect of chemical treatment methods on the outdoor performance of waste textile fiber-reinforced polymer composites},
journal = {Journal of Composite Materials},
year = 2016,
number = 14,
pages = {2009-2021},
month = 7,
volume = 51
}
|
Konu
Yayın ile ilgili açıklama girilmemiştir.
|
High Throughput Dry and Minumum Quantity Lubrication Drilling of Compacted Graphite Iron
7th CIRP conference on High Performance Cutting (HPC), Chemnitz/ALMANYA, Vol. 46, 31 Mayıs 2016, s. 87-90
KUZU ALİ TANER,WU VU,STEPHENSON DE,HONG JA,SHİH ALBERT J,BAKKAL MUSTAFA
@inproceedings{inproceedings,
author = {KUZU ALİ TANER,Wu Vu,Stephenson De,Hong Ja,Shih Albert J,BAKKAL MUSTAFA},
title = {High Throughput Dry and Minumum Quantity Lubrication Drilling of Compacted Graphite Iron},
year = 2016,
pages = {87-90},
month = 5,
volume = 46
}
|
Konu
Yayın ile ilgili açıklama girilmemiştir.
|
Modeling and measurement of cutting temperatures in milling
7th HPC 2016 – CIRP Conference on High Performance Cutting, Vol. 46, 31 Mayıs 2016, s. 173-176
BUDAK ERHAN,KARAGÜZEL UMUT,BAKKAL MUSTAFA
@inproceedings{inproceedings,
author = {BUDAK ERHAN,KARAGÜZEL UMUT,BAKKAL MUSTAFA},
title = {Modeling and measurement of cutting temperatures in milling},
year = 2016,
pages = {173-176},
month = 5,
volume = 46
}
|
Konu
Yayın ile ilgili açıklama girilmemiştir.
|
Effects of tool axis offset in turn milling process
Journal of Materials Processing Technology, Vol. 231, Mayıs 2016, s. 239-247, ISSN: 09240136
KARAGÜZEL UMUT,UYSAL EMRE,BUDAK ERHAN,BAKKAL MUSTAFA
@article{article,
author = {KARAGÜZEL UMUT,Uysal Emre,BUDAK ERHAN,BAKKAL MUSTAFA},
title = {Effects of tool axis offset in turn milling process},
journal = {Journal of Materials Processing Technology},
year = 2016,
pages = {239-247},
month = 5,
volume = 231
}
|
Konu
Yayın ile ilgili açıklama girilmemiştir.
|
The effect of cutting parameters and tool geometry on machinability of cotton fiber reinforced polymer composites Cutting forces burr formation and chip morphology
Journal of Industrial Textiles, Vol. 45, No. 6, Mayıs 2016, s. 1364-1382, ISSN: 1528-0837
KUZU ALİ TANER,BAKKAL MUSTAFA
@article{article,
author = {KUZU ALİ TANER,BAKKAL MUSTAFA},
title = {The effect of cutting parameters and tool geometry on machinability of cotton fiber reinforced polymer composites Cutting forces burr formation and chip morphology},
journal = {Journal of Industrial Textiles},
year = 2016,
number = 6,
pages = {1364-1382},
month = 5,
volume = 45
}
|
Konu
Yayın ile ilgili açıklama girilmemiştir.
|
Experimental study on the glass fiber/waste cotton fabric-reinforced hybrid composites: Mechanical and rheological investigations
Journal of Composite Materials, Vol. 51, No. 23, Mart 2016, s. 3257-3268, ISSN: 0021-9983
BODUR MEHMET SAFA,BAKKAL MUSTAFA,ENGLUND KARL
@article{article,
author = {BODUR MEHMET SAFA,BAKKAL MUSTAFA,Englund Karl},
title = {Experimental study on the glass fiber/waste cotton fabric-reinforced hybrid composites: Mechanical and rheological investigations},
journal = {Journal of Composite Materials},
year = 2016,
number = 23,
pages = {3257-3268},
month = 3,
volume = 51
}
|
Konu
Yayın ile ilgili açıklama girilmemiştir.
|
Thermal and force modeling of CGI drilling
The International Journal of Advanced Manufacturing Technology, Vol. 82, No. 9-12, Şubat 2016, s. 1649-1662, ISSN: 0268-3768
KAVEH RAHIMZADEH BERENJI,KUZU ALİ TANER,BAKKAL MUSTAFA
@article{article,
author = {KAVEH RAHIMZADEH BERENJI,KUZU ALİ TANER,BAKKAL MUSTAFA},
title = {Thermal and force modeling of CGI drilling},
journal = {The International Journal of Advanced Manufacturing Technology},
year = 2016,
number = 9-12,
pages = {1649-1662},
month = 2,
volume = 82
}
|
Konu
Yayın ile ilgili açıklama girilmemiştir.
|
Modeling and Measurement of Cutting Temperatures in Milling
Procedia CIRP, Vol. 46, Ocak 2016, s. 173-176, ISSN: 22128271
BUDAK ERHAN,KARAGÜZEL UMUT,BAKKAL MUSTAFA
@article{article,
author = {BUDAK ERHAN,KARAGÜZEL UMUT,BAKKAL MUSTAFA},
title = {Modeling and Measurement of Cutting Temperatures in Milling},
journal = {Procedia CIRP},
year = 2016,
pages = {173-176},
month = 1,
volume = 46
}
|
Konu
Yayın ile ilgili açıklama girilmemiştir.
|
Improving Performance of Turn milling by Controlling Forces and Thermally Induced Tool center Point TCP Displacement
Procedia CIRP, Vol. 40, Ocak 2016, s. 481-485, ISSN: 22128271
PUTZ M,IHLENFELDT S,KARAGÜZEL UMUT,SEMMLER U,BUDAK ERHAN,BAKKAL MUSTAFA,WERTHEİM R
@article{article,
author = {Putz M,Ihlenfeldt S,KARAGÜZEL UMUT,Semmler U,BUDAK ERHAN,BAKKAL MUSTAFA,Wertheim R},
title = {Improving Performance of Turn milling by Controlling Forces and Thermally Induced Tool center Point TCP Displacement},
journal = {Procedia CIRP},
year = 2016,
pages = {481-485},
month = 1,
volume = 40
}
|
Konu
Yayın ile ilgili açıklama girilmemiştir.
|
The effect of chemical treatment methods on the outdoor performance of waste textile fiber reinforced polymer composites
Journal of Composite Materials, 2016, s. 1-13, ISSN: 0021-9983
BAKKAL MUSTAFA,BODUR MEHMET SAFA,SONMEZ HASRET ECE,EKİM B CAN
@article{article,
author = {BAKKAL MUSTAFA,BODUR MEHMET SAFA,Sonmez Hasret Ece,Ekim B Can},
title = {The effect of chemical treatment methods on the outdoor performance of waste textile fiber reinforced polymer composites},
journal = {Journal of Composite Materials},
year = 2016,
pages = {1-13}
}
|
Konu
Yayın ile ilgili açıklama girilmemiştir.
|
Effects of Tool Axis Offset in Turn Milling Process
Journal of Materials Processing Technology, Aralık 2015, ISSN: 09240136
KARAGÜZEL UMUT,UYSAL EMRE,BUDAK ERHAN,BAKKAL MUSTAFA
@article{article,
author = {KARAGÜZEL UMUT,uysal emre,BUDAK ERHAN,BAKKAL MUSTAFA},
title = {Effects of Tool Axis Offset in Turn Milling Process},
journal = {Journal of Materials Processing Technology},
year = 2015,
month = 12
}
|
Konu
Yayın ile ilgili açıklama girilmemiştir.
|
An experimental study on grinding of Zr based bulk metallic glass
Advances in Manufacturing, Vol. 3, No. 4, Aralık 2015, s. 282-291, ISSN: 2095-3127
BAKKAL MUSTAFA,ERDİNÇ SERBEST,İLKER KARİPÇİN,KUZU ALİ TANER,KARAGÜZEL UMUT,DERİN CEVAT BORA
@article{article,
author = {BAKKAL MUSTAFA,ERDİNÇ SERBEST,İlker Karipçin,KUZU ALİ TANER,KARAGÜZEL UMUT,DERİN CEVAT BORA},
title = {An experimental study on grinding of Zr based bulk metallic glass},
journal = {Advances in Manufacturing},
year = 2015,
number = 4,
pages = {282-291},
month = 12,
volume = 3
}
|
Konu
Yayın ile ilgili açıklama girilmemiştir.
|
An experimental study on grinding of Zr-based bulk metallic glass
Advances in Manufacturing, Vol. 3, No. 4, Aralık 2015, s. 282-291, ISSN: 2095-3127
BAKKAL MUSTAFA,KARAGÜZEL UMUT,DERİN CEVAT BORA,KARİPÇİN İLKER,SERBEST ERDİNÇ,KUZU ALİ TANER
@article{article,
author = {BAKKAL MUSTAFA,KARAGÜZEL UMUT,DERİN CEVAT BORA,Karipçin İlker,Serbest Erdinç,KUZU ALİ TANER},
title = {An experimental study on grinding of Zr-based bulk metallic glass},
journal = {Advances in Manufacturing},
year = 2015,
number = 4,
pages = {282-291},
month = 12,
volume = 3
}
|
Konu
Yayın ile ilgili açıklama girilmemiştir.
|
Mikro frezeleme işleminde yüzey oluşumunun modellenmesi
Mikro frezeleme işleminde yüzey oluşumunun modellenmesi. In: 6. Ulusal Talaşlı İmalat Sempozyumu, Istanbul, 5 Kasım 2015
HATİPOĞLU ERSEN,BUDAK ERHAN,BAKKAL MUSTAFA
@inproceedings{inproceedings,
author = {Hatipoğlu Ersen,BUDAK ERHAN,BAKKAL MUSTAFA},
title = {Mikro frezeleme işleminde yüzey oluşumunun modellenmesi},
year = 2015,
month = 11
}
|
Konu
Yayın ile ilgili açıklama girilmemiştir.
|
FREZEYLE TORNALAMA İŞLEMİNDE KESME SICAKLIĞI MODELİ VE DENEYSEL OLARAK DOĞRULANMASI
6. Ulusal Talaşlı İmalat Sempozyumu, İstanbul/TÜRKİYE, 5 Kasım 2015
KARAGÜZEL UMUT,BUDAK ERHAN,BAKKAL MUSTAFA
@inproceedings{inproceedings,
author = {KARAGÜZEL UMUT,BUDAK ERHAN,BAKKAL MUSTAFA},
title = {FREZEYLE TORNALAMA İŞLEMİNDE KESME SICAKLIĞI MODELİ VE DENEYSEL OLARAK DOĞRULANMASI},
year = 2015,
month = 11
}
|
Konu
Yayın ile ilgili açıklama girilmemiştir.
|
MİNİMUM MİKTARDA YAĞLAMA İLE DERİN DELİK DELME İŞLEMİNDE İŞ PARÇASININ SICAKLIK MODELLEMESİ
6. Ulusal Talaşlı İmalat Sempozyumu, 5 Kasım 2015
KUZU ALİ TANER,KAVEH R BERENJİ,BAKKAL MUSTAFA
@inproceedings{inproceedings,
author = {KUZU ALİ TANER,Kaveh R Berenji,BAKKAL MUSTAFA},
title = {MİNİMUM MİKTARDA YAĞLAMA İLE DERİN DELİK DELME İŞLEMİNDE İŞ PARÇASININ SICAKLIK MODELLEMESİ},
year = 2015,
month = 11
}
|
Konu
Yayın ile ilgili açıklama girilmemiştir.
|
Improving performance of turn milling by controlling forces and thermally induced tool center point TCP displacement
13th Global Conference on Sustainable Manufacturing: Decoupling Growth from Resource Use, 16 Eylül 2015
MI PUTZ,SI IHLENFELDT,KARAGÜZEL UMUT,UL SEMMLER,BUDAK ERHAN,BAKKAL MUSTAFA,RU WERTHEIM
@inproceedings{inproceedings,
author = {MI PUTZ,SI IHLENFELDT,KARAGÜZEL UMUT,UL SEMMLER,BUDAK ERHAN,BAKKAL MUSTAFA,RU WERTHEIM},
title = {Improving performance of turn milling by controlling forces and thermally induced tool center point TCP displacement},
year = 2015,
month = 9
}
|
Konu
Yayın ile ilgili açıklama girilmemiştir.
|
An investigation for the effect of recycled matrix on the properties of textile waste cotton fiber reinforced T FRP composites
Polymer Composites, Ağustos 2015, ISSN: 02728397
M SAFA BODUR,HASRET ECE SONMEZ,BAKKAL MUSTAFA
@article{article,
author = {M Safa Bodur,HASRET ECE SONMEZ,BAKKAL MUSTAFA},
title = {An investigation for the effect of recycled matrix on the properties of textile waste cotton fiber reinforced T FRP composites},
journal = {Polymer Composites},
year = 2015,
month = 8
}
|
Konu
Yayın ile ilgili açıklama girilmemiştir.
|
Numerical temperature Distribution Modeling on CGI Deep Hole Drilling with MQL
McMAT 2015, 29 Haziran 2015
KUZU ALİ TANER,KAVEH R BERENJİ,BAKKAL MUSTAFA
@inproceedings{inproceedings,
author = {KUZU ALİ TANER,kaveh R Berenji,BAKKAL MUSTAFA},
title = {Numerical temperature Distribution Modeling on CGI Deep Hole Drilling with MQL},
year = 2015,
month = 6
}
|
Konu
Yayın ile ilgili açıklama girilmemiştir.
|
Experimental investigation of tool wear in micro milling
8th International Conference and Exhibition on Design and Production of Machines and DIES/MOLDS, Aydın, Kuşadası, Türkiye, Aydın/TÜRKİYE, 18 Haziran 2015
ERSEN HATİPOĞLU,BUDAK ERHAN,BAKKAL MUSTAFA
@inproceedings{inproceedings,
author = {Ersen hatipoğlu,BUDAK ERHAN,BAKKAL MUSTAFA},
title = {Experimental investigation of tool wear in micro milling},
year = 2015,
month = 6
}
|
Konu
Yayın ile ilgili açıklama girilmemiştir.
|
Cutting Temperature and Tool Wear in Turn Milling
The 4th International Conference on Virtual Machining Process Technology (VMPT 2015), 2 Haziran 2015
KARAGÜZEL UMUT,BUDAK ERHAN,BAKKAL MUSTAFA
@inproceedings{inproceedings,
author = {KARAGÜZEL UMUT,BUDAK ERHAN,BAKKAL MUSTAFA},
title = {Cutting Temperature and Tool Wear in Turn Milling},
year = 2015,
month = 6
}
|
Konu
Yayın ile ilgili açıklama girilmemiştir.
|
Increasing tool life in machining of difficult to cut materials using nonconventional turning processes
The International Journal of Advanced Manufacturing Technology, Vol. 77, No. 9-12, Nisan 2015, s. 1993-2004, ISSN: 0268-3768
KARAGÜZEL UMUT,UFUK UTKU,UYSAL E,BUDAK ERHAN,BAKKAL MUSTAFA
@article{article,
author = {KARAGÜZEL UMUT,UFUK UTKU,UYSAL E,BUDAK ERHAN,BAKKAL MUSTAFA},
title = {Increasing tool life in machining of difficult to cut materials using nonconventional turning processes},
journal = {The International Journal of Advanced Manufacturing Technology},
year = 2015,
number = 9-12,
pages = {1993-2004},
month = 4,
volume = 77
}
|
Konu
Yayın ile ilgili açıklama girilmemiştir.
|
Analytical modeling of turn milling process geometry kinematics and mechanics
International Journal of Machine Tools and Manufacture, Vol. 91, Nisan 2015, s. 24-33, ISSN: 08906955
KARAGÜZEL UMUT,UYSAL EMRE,BUDAK ERHAN,BAKKAL MUSTAFA
@article{article,
author = {KARAGÜZEL UMUT,Uysal Emre,BUDAK ERHAN,BAKKAL MUSTAFA},
title = {Analytical modeling of turn milling process geometry kinematics and mechanics},
journal = {International Journal of Machine Tools and Manufacture},
year = 2015,
pages = {24-33},
month = 4,
volume = 91
}
|
Konu
Yayın ile ilgili açıklama girilmemiştir.
|
Investigating Eccentricity Effects in Turn milling Operations
Procedia CIRP, Vol. 14, Ocak 2014, s. 176-181, ISSN: 22128271
UYSAL EMRE,KARAGÜZEL UMUT,BUDAK ERHAN,BAKKAL MUSTAFA
@article{article,
author = {Uysal Emre,KARAGÜZEL UMUT,BUDAK ERHAN,BAKKAL MUSTAFA},
title = {Investigating Eccentricity Effects in Turn milling Operations},
journal = {Procedia CIRP},
year = 2014,
pages = {176-181},
month = 1,
volume = 14
}
|
Konu
Yayın ile ilgili açıklama girilmemiştir.
|
Effect of Recycled LDPE Matrix on the Properties of Waste Cotton Fiber Reinforced WCF R Composites
Usak University Journal of Material Sciences, Vol. 1, No. 2014, Ocak 2014, s. 135-141
BODUR MEHMET SAFA,HASRET ECE SÖNMEZ,BERKALP ÖMER BERK,BAKKAL MUSTAFA
@article{article,
author = {BODUR MEHMET SAFA,Hasret Ece Sönmez,BERKALP ÖMER BERK,BAKKAL MUSTAFA},
title = {Effect of Recycled LDPE Matrix on the Properties of Waste Cotton Fiber Reinforced WCF R Composites},
journal = {Usak University Journal of Material Sciences},
year = 2014,
number = 2014,
pages = {135-141},
month = 1,
volume = 1
}
|
Konu
Yayın ile ilgili açıklama girilmemiştir.
|
A new approach for the development of textile waste cotton reinforced composites T FRP laminated hybridization vs coupling agents
Journal of Polymer Engineering, Vol. 34, No. 7, Ocak 2014, ISSN: 2191-0340
BODUR MEHMET SAFA,BAKKAL MUSTAFA,MEHMET SAVAŞ,BERKALP ÖMER BERK
@article{article,
author = {BODUR MEHMET SAFA,BAKKAL MUSTAFA,Mehmet Savaş,BERKALP ÖMER BERK},
title = {A new approach for the development of textile waste cotton reinforced composites T FRP laminated hybridization vs coupling agents},
journal = {Journal of Polymer Engineering},
year = 2014,
number = 7,
month = 1,
volume = 34
}
|
Konu
Yayın ile ilgili açıklama girilmemiştir.
|
High performance turning of high temperature alloys on multi tasking machine tools
New Production Technologies in Aerospace Industry, Ocak 2014, s. 1-9, ISSN: 978-3-319-01964-2
KARAGÜZEL UMUT,UTKU OLGUN,BUDAK ERHAN,BAKKAL MUSTAFA
@article{article,
author = {KARAGÜZEL UMUT,Utku Olgun,BUDAK ERHAN,BAKKAL MUSTAFA},
title = {High performance turning of high temperature alloys on multi tasking machine tools},
journal = {New Production Technologies in Aerospace Industry},
year = 2014,
pages = {1-9},
month = 1
}
|
Konu
Yayın ile ilgili açıklama girilmemiştir.
|
AUTONOMOUS HOLE QUALITY DETERMINATION USING IMAGE PROCESSING TECHNIQUES
Proceedings of the IEEE International Symposium on Industrial Electronics, 2014, s. 966-971, ISSN: 2163-5137
KUZU ALİ TANER,KAVEH R BERENJİ,SETA BOGOSYAN,GÖKAŞAN METİN,BAKKAL MUSTAFA
@article{article,
author = {KUZU ALİ TANER,Kaveh R Berenji,Seta bogosyan,GÖKAŞAN METİN,BAKKAL MUSTAFA},
title = {AUTONOMOUS HOLE QUALITY DETERMINATION USING IMAGE PROCESSING TECHNIQUES},
journal = {Proceedings of the IEEE International Symposium on Industrial Electronics},
year = 2014,
pages = {966-971}
}
|
Konu
Yayın ile ilgili açıklama girilmemiştir.
|
Development of new methodology for composite repllacement for steel materials
MECHCOMP 2, 11 Temmuz 2013
BAKKAL MUSTAFA,OTUZ OKAN,TAM FERİT,KUZU ALİ TANER,KARAGÜZEL UMUT,OSMANOĞLU HANDE
@inproceedings{inproceedings,
author = {BAKKAL MUSTAFA,Otuz Okan,Tam Ferit,KUZU ALİ TANER,KARAGÜZEL UMUT,Osmanoğlu Hande},
title = {Development of new methodology for composite repllacement for steel materials},
year = 2013,
month = 7
}
|
Konu
Yayın ile ilgili açıklama girilmemiştir.
|
Utilization of various non woven waste forms as reinforcement in polymeric composites
Textile Research Journal, Vol. 83, No. 15, Temmuz 2013, s. 1551-1562, ISSN: 0040-5175
YALÇIN İPEK,GÖK SADIKOĞLU ÜMMÜHAN TELEM,BERKALP ÖMER BERK,BAKKAL MUSTAFA
@article{article,
author = {YALÇIN İPEK,GÖK SADIKOĞLU ÜMMÜHAN TELEM,BERKALP ÖMER BERK,BAKKAL MUSTAFA},
title = {Utilization of various non woven waste forms as reinforcement in polymeric composites},
journal = {Textile Research Journal},
year = 2013,
number = 15,
pages = {1551-1562},
month = 7,
volume = 83
}
|
Konu
Yayın ile ilgili açıklama girilmemiştir.
|
Polimer Yapılar, Polimerlerin Özellikleri Uygulamaları ve İşlenmesi, Kompozitler, Malzeme bilimi ve mühendisliğinde ekonomik Çevresel ve Toplumsal Konular Malzeme Bilimi ve Mühendisliği 8th ed Callister W D Rethwisch D G
2013, Nobel Yayıncılık, Ankara
BAKKAL MUSTAFA
@book{book,
author = {BAKKAL MUSTAFA},
title = {Polimer Yapılar, Polimerlerin Özellikleri Uygulamaları ve İşlenmesi, Kompozitler, Malzeme bilimi ve mühendisliğinde ekonomik Çevresel ve Toplumsal Konular},
booktitle = {Malzeme Bilimi ve Mühendisliği 8th ed Callister W D Rethwisch D G},
year = 2013,
publisher = {Nobel Yayıncılık, Ankara}
}
|
Konu
Yayın ile ilgili açıklama girilmemiştir.
|
Development of Natural Fiber Reinforced Laminated Hybrid Composites
Advanced Materials Research, Vol. 628, Aralık 2012, s. 15-20, ISSN: 1662-8985
BAKKAL MUSTAFA,MEHMET SAVAŞ
@article{article,
author = {BAKKAL MUSTAFA,Mehmet Savaş},
title = {Development of Natural Fiber Reinforced Laminated Hybrid Composites},
journal = {Advanced Materials Research},
year = 2012,
pages = {15-20},
month = 12,
volume = 628
}
|
Konu
Yayın ile ilgili açıklama girilmemiştir.
|
The effect of reprocessing on the mechanical properties of the waste fabric reinforced composites
Journal of Materials Processing Technology, Vol. 212, No. 11, Kasım 2012, s. 2541-2548, ISSN: 09240136
BAKKAL MUSTAFA,BODUR MEHMET SAFA,BERKALP ÖMER BERK,YILMAZ ŞAFAK
@article{article,
author = {BAKKAL MUSTAFA,BODUR MEHMET SAFA,BERKALP ÖMER BERK,YILMAZ ŞAFAK},
title = {The effect of reprocessing on the mechanical properties of the waste fabric reinforced composites},
journal = {Journal of Materials Processing Technology},
year = 2012,
number = 11,
pages = {2541-2548},
month = 11,
volume = 212
}
|
Konu
Yayın ile ilgili açıklama girilmemiştir.
|
Process Modeling of Turn Milling Using Analytical Approach
Procedia CIRP, Vol. 4, Ocak 2012, s. 131-139, ISSN: 22128271
KARAGÜZEL UMUT,BAKKAL MUSTAFA,BUDAK ERHAN
@article{article,
author = {KARAGÜZEL UMUT,BAKKAL MUSTAFA,BUDAK ERHAN},
title = {Process Modeling of Turn Milling Using Analytical Approach},
journal = {Procedia CIRP},
year = 2012,
pages = {131-139},
month = 1,
volume = 4
}
|
Konu
Yayın ile ilgili açıklama girilmemiştir.
|
The Effects of Tool Geometry on Machinability of Textile Fabric Reinforced Termoplastic Matrix Composites
Advanced Materials Research, No. 445, 2012, s. 841-846
BAKKAL MUSTAFA
@article{article,
author = {BAKKAL MUSTAFA},
title = {The Effects of Tool Geometry on Machinability of Textile Fabric Reinforced Termoplastic Matrix Composites},
journal = {Advanced Materials Research},
year = 2012,
number = 445,
pages = {841-846}
}
|
Konu
Yayın ile ilgili açıklama girilmemiştir.
|
FINITE ELEMENT MODELING OF RANDOM WASTE COTTON FIBER REINFORCED POLYETHYLENE COMPOSITES
Journal of Textile & Apparel, Vol. 22, No. 4, 2012
BAKKAL MUSTAFA
@article{article,
author = {BAKKAL MUSTAFA},
title = {FINITE ELEMENT MODELING OF RANDOM WASTE COTTON FIBER REINFORCED POLYETHYLENE COMPOSITES},
journal = {Journal of Textile & Apparel},
year = 2012,
number = 4,
volume = 22
}
|
Konu
Yayın ile ilgili açıklama girilmemiştir.
|
Key Engineering Materials Vol 521
2012, Trans Tech Publications, Switzerland
BAKKAL MUSTAFA
@book{book,
author = {BAKKAL MUSTAFA},
title = {Key Engineering Materials Vol 521},
year = 2012,
publisher = {Trans Tech Publications, Switzerland}
}
|
Konu
Yayın ile ilgili açıklama girilmemiştir.
|
Sliding tribological characteristics of Zr based bulk metallic glass under lubricated conditions
Intermetallics, Vol. 18, No. 6, Haziran 2010, s. 1251-1253, ISSN: 09669795
BAKKAL MUSTAFA
@article{article,
author = {BAKKAL MUSTAFA},
title = {Sliding tribological characteristics of Zr based bulk metallic glass under lubricated conditions},
journal = {Intermetallics},
year = 2010,
number = 6,
pages = {1251-1253},
month = 6,
volume = 18
}
|
Konu
Yayın ile ilgili açıklama girilmemiştir.
|
The Effect of Reprocessing on the Tensile Properties of Composites
AIP Conference Proceedings, Vol. 1315, Ocak 2010, s. 215-220
BAKKAL MUSTAFA
@article{article,
author = {BAKKAL MUSTAFA},
title = {The Effect of Reprocessing on the Tensile Properties of Composites},
journal = {AIP Conference Proceedings},
year = 2010,
pages = {215-220},
month = 1,
volume = 1315
}
|
Konu
Yayın ile ilgili açıklama girilmemiştir.
|
The Effect of Cutting Speed in Metallic Glass Grinding
AIP Conference Proceedings, Vol. 1315, 2010, s. 967-972
BAKKAL MUSTAFA
@article{article,
author = {BAKKAL MUSTAFA},
title = {The Effect of Cutting Speed in Metallic Glass Grinding},
journal = {AIP Conference Proceedings},
year = 2010,
pages = {967-972},
volume = 1315
}
|
Konu
Yayın ile ilgili açıklama girilmemiştir.
|
Machinability of bulk metallic glass materials on milling and drilling
Advanced Materials Research, No. 83-86, 2010, s. 335-341
BAKKAL MUSTAFA
@article{article,
author = {BAKKAL MUSTAFA},
title = {Machinability of bulk metallic glass materials on milling and drilling},
journal = {Advanced Materials Research},
year = 2010,
number = 83-86,
pages = {335-341}
}
|
Konu
Yayın ile ilgili açıklama girilmemiştir.
|
Machinability of Bulk Metallic Glass Materials on Milling and Drilling
Advanced Materials Research, Vol. 8386, Aralık 2009, s. 335-341, ISSN: 1662-8985
BAKKAL MUSTAFA,DERİN CEVAT BORA,NAKŞİLER VELİ
@article{article,
author = {BAKKAL MUSTAFA,DERİN CEVAT BORA,Nakşiler Veli},
title = {Machinability of Bulk Metallic Glass Materials on Milling and Drilling},
journal = {Advanced Materials Research},
year = 2009,
pages = {335-341},
month = 12,
volume = 8386
}
|
Konu
Yayın ile ilgili açıklama girilmemiştir.
|
Cutting Mechanics of Bulk Metallic Glass Materials on Meso End Milling
Materials and Manufacturing Processes, Vol. 24, No. 12, Aralık 2009, s. 1249-1255, ISSN: 1042-6914
BAKKAL MUSTAFA,NAKŞİLER VELİ
@article{article,
author = {BAKKAL MUSTAFA,Nakşiler Veli},
title = {Cutting Mechanics of Bulk Metallic Glass Materials on Meso End Milling},
journal = {Materials and Manufacturing Processes},
year = 2009,
number = 12,
pages = {1249-1255},
month = 12,
volume = 24
}
|
Konu
Yayın ile ilgili açıklama girilmemiştir.
|
Electron microscopy of bulk metallic glass machining chips
Journal of Non-Crystalline Solids, No. 355, Ocak 2009, s. 2220-2223
BAKKAL MUSTAFA
@article{article,
author = {BAKKAL MUSTAFA},
title = {Electron microscopy of bulk metallic glass machining chips},
journal = {Journal of Non-Crystalline Solids},
year = 2009,
number = 355,
pages = {2220-2223},
month = 1
}
|
Konu
Yayın ile ilgili açıklama girilmemiştir.
|
Atık Kumaş Takviyeli Polimer Matrisli Kompozitlerin Darbe Ve Çekme Davranışlarının İncelenmesi
Tekstil ve Konfeksiyon, No. 2, Ocak 2009, s. 139-144
ARAL YILMAZ NEBAHAT,BAKKAL MUSTAFA,BERKALP ÖMER BERK,GÖK SADIKOĞLU ÜMMÜHAN TELEM
@article{article,
author = {ARAL YILMAZ NEBAHAT,BAKKAL MUSTAFA,BERKALP ÖMER BERK,GÖK SADIKOĞLU ÜMMÜHAN TELEM},
title = {Atık Kumaş Takviyeli Polimer Matrisli Kompozitlerin Darbe Ve Çekme Davranışlarının İncelenmesi},
journal = {Tekstil ve Konfeksiyon},
year = 2009,
number = 2,
pages = {139-144},
month = 1
}
|
Konu
Yayın ile ilgili açıklama girilmemiştir.
|
Sliding tribological characteristics of Zr based bulk metallic glass
Intermetallics, Vol. 16, No. 1, Ocak 2008, s. 34-41, ISSN: 09669795
ALBERT J SHİH,BAKKAL MUSTAFA,PARLAR ZEYNEP
@article{article,
author = {Albert J Shih,BAKKAL MUSTAFA,PARLAR ZEYNEP},
title = {Sliding tribological characteristics of Zr based bulk metallic glass},
journal = {Intermetallics},
year = 2008,
number = 1,
pages = {34-41},
month = 1,
volume = 16
}
|
Konu
Yayın ile ilgili açıklama girilmemiştir.
|
Shear punch tests for a bulk metallic glass
Intermetallics, Vol. 14, No. 12, Aralık 2006, s. 1411-1416, ISSN: 09669795
RK GUDURU,KA DARLİNG,RO SCATTERGOOD,CC KOCH,KL MURTY,BAKKAL MUSTAFA,AJ SHİH
@article{article,
author = {RK Guduru,KA Darling,RO Scattergood,CC Koch,KL Murty,BAKKAL MUSTAFA,AJ Shih},
title = {Shear punch tests for a bulk metallic glass},
journal = {Intermetallics},
year = 2006,
number = 12,
pages = {1411-1416},
month = 12,
volume = 14
}
|
Konu
Yayın ile ilgili açıklama girilmemiştir.
|
Thrust force torque and tool wear in drilling the bulk metallic glass
International Journal of Machine Tools and Manufacture, Vol. 45, No. 7-8, Haziran 2005, s. 863-872, ISSN: 08906955
BAKKAL MUSTAFA,ALBERT J SHİH,SAMUEL B MCSPADDEN,RONALD O SCATTERGOOD
@article{article,
author = {BAKKAL MUSTAFA,Albert J Shih,Samuel B McSpadden,Ronald O Scattergood},
title = {Thrust force torque and tool wear in drilling the bulk metallic glass},
journal = {International Journal of Machine Tools and Manufacture},
year = 2005,
number = 7-8,
pages = {863-872},
month = 6,
volume = 45
}
|
Konu
Yayın ile ilgili açıklama girilmemiştir.
|
Light emission chip morphology and burr formation in drilling the bulk metallic glass
International Journal of Machine Tools and Manufacture, Vol. 45, No. 7-8, Haziran 2005, s. 741-752, ISSN: 08906955
BAKKAL MUSTAFA,ALBERT J SHİH,SAMUEL B MCSPADDEN,CT LİU,RONALD O SCATTERGOOD
@article{article,
author = {BAKKAL MUSTAFA,Albert J Shih,Samuel B McSpadden,CT Liu,Ronald O Scattergood},
title = {Light emission chip morphology and burr formation in drilling the bulk metallic glass},
journal = {International Journal of Machine Tools and Manufacture},
year = 2005,
number = 7-8,
pages = {741-752},
month = 6,
volume = 45
}
|
Konu
Yayın ile ilgili açıklama girilmemiştir.
|
Chip formation cutting forces and tool wear in turning of Zr based bulk metallic glass
International Journal of Machine Tools and Manufacture, Vol. 44, No. 9, Temmuz 2004, s. 915-925, ISSN: 08906955
BAKKAL MUSTAFA,ALBERT J SHİH,RONALD O SCATTERGOOD
@article{article,
author = {BAKKAL MUSTAFA,Albert J Shih,Ronald O Scattergood},
title = {Chip formation cutting forces and tool wear in turning of Zr based bulk metallic glass},
journal = {International Journal of Machine Tools and Manufacture},
year = 2004,
number = 9,
pages = {915-925},
month = 7,
volume = 44
}
|
Konu
Yayın ile ilgili açıklama girilmemiştir.
|
Machining of a Zr-Ti-Al-Cu-Ni metallic glass
Scripta Materialia, Vol. 50, No. 5, Mart 2004, s. 583-588, ISSN: 1359-6462
BAKKAL MUSTAFA,SHİH ALBERT J,SCATTERGOOD RONALD O,LİU CT
@article{article,
author = {BAKKAL MUSTAFA,Shih Albert J,Scattergood Ronald O,Liu CT},
title = {Machining of a Zr-Ti-Al-Cu-Ni metallic glass},
journal = {Scripta Materialia},
year = 2004,
number = 5,
pages = {583-588},
month = 3,
volume = 50
}
|
Konu
Yayın ile ilgili açıklama girilmemiştir.
|
Oxidation and crystallization of Zr based bulk metallic glass due to machining
Intermetallics, Vol. 12, No. 2, Şubat 2004, s. 195-204, ISSN: 09669795
BAKKAL MUSTAFA,CHAİN T LİU,THOMAS R WATKİNS,RONALD O SCATTERGOOD,ALBERT J SHİH
@article{article,
author = {BAKKAL MUSTAFA,Chain T Liu,Thomas R Watkins,Ronald O Scattergood,Albert J Shih},
title = {Oxidation and crystallization of Zr based bulk metallic glass due to machining},
journal = {Intermetallics},
year = 2004,
number = 2,
pages = {195-204},
month = 2,
volume = 12
}
|
Konu
Yayın ile ilgili açıklama girilmemiştir.
|