Improvement in the comprehensibility of the pioneering work of McIver
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING, Vol. 45, No. 2, Ocak 2023, s. 11, ISSN: 1678-5878
GÜRGÖZE METİN, ALTINKAYNAK ATAKAN
@article{article,
author = {GÜRGÖZE METİN, ALTINKAYNAK ATAKAN},
title = {Improvement in the comprehensibility of the pioneering work of McIver},
journal = {JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING},
year = 2023,
number = 2,
pages = {11},
month = 1,
volume = 45
}
|
Topic
Yayın ile ilgili açıklama girilmemiştir.
|
A novel artificial neural network-based interface coupling approach for partitioned fluid-structure interaction problems
ENGINEERING ANALYSIS WITH BOUNDARY ELEMENTS, Vol. 151, Ocak 2023, s. 22, ISSN: 0955-7997
MAZHAR FARRUKH, JAVED ALİ, ALTINKAYNAK ATAKAN
@article{article,
author = {Mazhar Farrukh, Javed Ali, ALTINKAYNAK ATAKAN},
title = {A novel artificial neural network-based interface coupling approach for partitioned fluid-structure interaction problems},
journal = {ENGINEERING ANALYSIS WITH BOUNDARY ELEMENTS},
year = 2023,
pages = {22},
month = 1,
volume = 151
}
|
Topic
Yayın ile ilgili açıklama girilmemiştir.
|
Solving PDEs with a Hybrid Radial Basis Function: Power-Generalized Multiquadric Kernel
Global Science Press, Vol. 14, Haziran 2022, ISSN: 2070-0733
ŞENEL CEM BERK, VAN BEECK JEROEN, ALTINKAYNAK ATAKAN
@article{article,
author = {ŞENEL CEM BERK, van Beeck Jeroen, ALTINKAYNAK ATAKAN},
title = {Solving PDEs with a Hybrid Radial Basis Function: Power-Generalized Multiquadric Kernel},
journal = {Global Science Press},
year = 2022,
month = 6,
volume = 14
}
|
Topic
Yayın ile ilgili açıklama girilmemiştir.
|
Finite element modeling of an origami-inspired delta mechanism with flexible components and joints
Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Vol. 236, No. 22, Haziran 2022, ISSN: 1754-3371
SAMANKAN SHAHRAD, ARJOMANDİ FARD ATA, BERKKURT TUNCA ZEKİ, ALTINKAYNAK ATAKAN, ACER KALAFAT MERVE
@article{article,
author = {Samankan Shahrad, Arjomandi Fard Ata, BERKKURT TUNCA ZEKİ, ALTINKAYNAK ATAKAN, ACER KALAFAT MERVE},
title = {Finite element modeling of an origami-inspired delta mechanism with flexible components and joints},
journal = {Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science},
year = 2022,
number = 22,
month = 6,
volume = 236
}
|
Topic
Yayın ile ilgili açıklama girilmemiştir.
|
Numerical and experimental analysis of bead cross-sectional geometry in fused filament fabrication
Emerald, Vol. 28, No. 10, Mayıs 2022, s. 1882-1894, ISSN: 1355-2546
BALTA EFE, ALTINKAYNAK ATAKAN
@article{article,
author = {Balta Efe, ALTINKAYNAK ATAKAN},
title = {Numerical and experimental analysis of bead cross-sectional geometry in fused filament fabrication},
journal = {Emerald},
year = 2022,
number = 10,
pages = {1882-1894},
month = 5,
volume = 28
}
|
Topic
Yayın ile ilgili açıklama girilmemiştir.
|
Numerical and experimental analysis of optimal nozzle dimensions for FDM printers
PROGRESS IN ADDITIVE MANUFACTURING, Vol. 7, No. 5, Ocak 2022, ISSN: 2363-9512
HIRA ONUR, YÜCEDAĞ SENEM, SAMANKAN SHAHRAD, ÇİÇEK ÖVGÜ YAĞIZ, ALTINKAYNAK ATAKAN
@article{article,
author = {HIRA ONUR, Yücedağ Senem, Samankan Shahrad, Çiçek Övgü Yağız, ALTINKAYNAK ATAKAN},
title = {Numerical and experimental analysis of optimal nozzle dimensions for FDM printers},
journal = {PROGRESS IN ADDITIVE MANUFACTURING},
year = 2022,
number = 5,
month = 1,
volume = 7
}
|
Topic
Yayın ile ilgili açıklama girilmemiştir.
|
Hardness, friction and wear characteristics of 3D-printed PLA polymer
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY, Vol. 235, No. 8, Ağustos 2021, s. 1590-1598, ISSN: 1350-6501
ZHIANI HERVAN SAHAR, ALTINKAYNAK ATAKAN, PARLAR ZEYNEP
@article{article,
author = {ZHIANI HERVAN SAHAR, ALTINKAYNAK ATAKAN, PARLAR ZEYNEP},
title = {Hardness, friction and wear characteristics of 3D-printed PLA polymer},
journal = {PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY},
year = 2021,
number = 8,
pages = {1590-1598},
month = 8,
volume = 235
}
|
Topic
Yayın ile ilgili açıklama girilmemiştir.
|
A Novel Origami-Inspired Delta Mechanism With Flat Parallelogram Joints
JOURNAL OF MECHANISMS AND ROBOTICS-TRANSACTIONS OF THE ASME, Vol. 13, No. 2, Nisan 2021, s. 21005, ISSN: 1942-4302
ACER KALAFAT MERVE, SEVİNÇ HASAN, SAMANKAN SHAHRAD, ALTINKAYNAK ATAKAN, TEMEL ZEYNEP
@article{article,
author = {ACER KALAFAT MERVE, Sevinç Hasan, Samankan Shahrad, ALTINKAYNAK ATAKAN, Temel Zeynep},
title = {A Novel Origami-Inspired Delta Mechanism With Flat Parallelogram Joints},
journal = {JOURNAL OF MECHANISMS AND ROBOTICS-TRANSACTIONS OF THE ASME},
year = 2021,
number = 2,
pages = {21005},
month = 4,
volume = 13
}
|
Topic
Yayın ile ilgili açıklama girilmemiştir.
|
A new dynamic model for a rotating beam carrying extra partially distributed mass
ARCHIVES OF MECHANICS, Vol. 72, No. 4, Temmuz 2020, s. 307-321, ISSN: 0373-2029
ALTINKAYNAK ATAKAN,GÜRGÖZE METİN
@article{article,
author = {ALTINKAYNAK ATAKAN,Gürgöze Metin},
title = {A new dynamic model for a rotating beam carrying extra partially distributed mass},
journal = {ARCHIVES OF MECHANICS},
year = 2020,
number = 4,
pages = {307-321},
month = 7,
volume = 72
}
|
Topic
Yayın ile ilgili açıklama girilmemiştir.
|
Ağsız Yöntem Uygulamaları için Trigonometri Tabanlı Radyal Özelliğe Sahip Yeni Bir Temel Fonksiyon
International journal of advances in engineering and pure sciences (Online), Vol. 32, No. 1, Mart 2020, s. 96-110, ISSN: 2146-5150
ALTINKAYNAK ATAKAN
@article{article,
author = {ALTINKAYNAK ATAKAN},
title = {Ağsız Yöntem Uygulamaları için Trigonometri Tabanlı Radyal Özelliğe Sahip Yeni Bir Temel Fonksiyon},
journal = {International journal of advances in engineering and pure sciences (Online)},
year = 2020,
number = 1,
pages = {96-110},
month = 3,
volume = 32
}
|
Topic
Yayın ile ilgili açıklama girilmemiştir.
|
Dimensional accuracy of FDM-printed polymer parts
RAPID PROTOTYPING JOURNAL, Vol. 26, No. 2, Şubat 2020, s. 288-298, ISSN: 1355-2546
AKBAŞ OĞUZHAN EMRE,HIRA ONUR,HERVAN SAHAR ZHİANİ,SAMANKAN SHAHRAD,ALTINKAYNAK ATAKAN
@article{article,
author = {Akbaş Oğuzhan Emre,HIRA ONUR,Hervan Sahar Zhiani,Samankan Shahrad,ALTINKAYNAK ATAKAN},
title = {Dimensional accuracy of FDM-printed polymer parts},
journal = {RAPID PROTOTYPING JOURNAL},
year = 2020,
number = 2,
pages = {288-298},
month = 2,
volume = 26
}
|
Topic
Yayın ile ilgili açıklama girilmemiştir.
|
3D Finite Element Simulation of Polymer Extrudate in FDM 3D Printers
II International Conference on Simulation for Additive Manufacturing - Sim-AM 2019, Pavia/İTALYA, 11 Eylül 2019, s. 361-368
HIRA ONUR,ALTINKAYNAK ATAKAN
@inproceedings{inproceedings,
author = {HIRA ONUR,ALTINKAYNAK ATAKAN},
title = {3D Finite Element Simulation of Polymer Extrudate in FDM 3D Printers},
year = 2019,
pages = {361-368},
month = 9
}
|
Topic
Yayın ile ilgili açıklama girilmemiştir.
|
Origami Tabanlı Paralel Robotların Geliştirilmesi ve Sensör Entegrasyonu
5. Türkiye Robotbilim Konferansı - TORK 2019, İstanbul/TÜRKİYE, 26 Haziran 2019, s. 70-77
SEVİNÇ HASAN, SAMANKAN SHAHRAD, ALTINKAYNAK ATAKAN, TEMEL ZEYNEP, ACER KALAFAT MERVE
@inproceedings{inproceedings,
author = {Sevinç Hasan, Samankan Shahrad, ALTINKAYNAK ATAKAN, Temel Zeynep, ACER KALAFAT MERVE},
title = {Origami Tabanlı Paralel Robotların Geliştirilmesi ve Sensör Entegrasyonu},
year = 2019,
pages = {70-77},
month = 6
}
|
Topic
Yayın ile ilgili açıklama girilmemiştir.
|
Friction And Hardness Characteristics Of Fdm-Printed Plastic Materials
21 st International Research/Expert Conference ”Trends in the Development of Machinery and Associated Technology” TMT2018, 18 Eylül 2018, s. 65-68
ZHIANI HERVAN SAHAR,PARLAR ZEYNEP,TEMİZ VEDAT,ALTINKAYNAK ATAKAN
@inproceedings{inproceedings,
author = {ZHIANI HERVAN SAHAR,PARLAR ZEYNEP,TEMİZ VEDAT,ALTINKAYNAK ATAKAN},
title = {Friction And Hardness Characteristics Of Fdm-Printed Plastic Materials},
year = 2018,
pages = {65-68},
month = 9
}
|
Topic
Yayın ile ilgili açıklama girilmemiştir.
|
The Optimization Of A Commercial Vehicle’s Leaf Spring Connection Bracket
21 st International Research/Expert Conference ”Trends in the Development of Machinery and Associated Technology” TMT 2018, 18 Eylül 2018, s. 253-256
ÇALİŞKAN BARIŞ, PARLAR ZEYNEP, ALTINKAYNAK ATAKAN
@inproceedings{inproceedings,
author = {Çalişkan Barış, PARLAR ZEYNEP, ALTINKAYNAK ATAKAN},
title = {The Optimization Of A Commercial Vehicle’s Leaf Spring Connection Bracket},
year = 2018,
pages = {253-256},
month = 9
}
|
Topic
Yayın ile ilgili açıklama girilmemiştir.
|
Numerical and Experimental Analysis of Infill Rate on the Mechanical Properties of Fused Deposition Modelling Polylactic Acid Parts
SPE ANTEC, Anaheim/AMERİKA BİRLEŞİK DEVLETLERİ, 8 Mayıs 2017, s. 75-81
ÇİÇEK ÖVGÜ YAĞIZ,ALTINKAYNAK ATAKAN,BALTA EFE
@inproceedings{inproceedings,
author = {Çiçek Övgü Yağız,ALTINKAYNAK ATAKAN,Balta Efe},
title = {Numerical and Experimental Analysis of Infill Rate on the Mechanical Properties of Fused Deposition Modelling Polylactic Acid Parts},
year = 2017,
pages = {75-81},
month = 5
}
|
Topic
Yayın ile ilgili açıklama girilmemiştir.
|
An efficient sparse matrix-vector multiplication on CUDA-enabled graphic processing units for finite element method simulations
International Journal for Numerical Methods in Engineering, Vol. 110, No. 1, Nisan 2017, s. 57-78, ISSN: 00295981
ALTINKAYNAK ATAKAN
@article{article,
author = {ALTINKAYNAK ATAKAN},
title = {An efficient sparse matrix-vector multiplication on CUDA-enabled graphic processing units for finite element method simulations},
journal = {International Journal for Numerical Methods in Engineering},
year = 2017,
number = 1,
pages = {57-78},
month = 4,
volume = 110
}
|
Topic
Yayın ile ilgili açıklama girilmemiştir.
|
Önden Yüklemeli Bir Çamaşır Makinesinin Sonlu Elemanlar Yöntemiyle Dinamik Olarak Modellenmesi
Gazi Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi, Vol. 31, No. 3, Ekim 2016, s. 773-780, ISSN: 1304-4915
ÖZER MEHMET,ALTINKAYNAK ATAKAN,TEMİZ VEDAT,MUTLU TURHAN,DIŞPINAR TUĞBA,ÖZGEN ABDULKADİR,YÜCEL MURAT
@article{article,
author = {Özer Mehmet,ALTINKAYNAK ATAKAN,TEMİZ VEDAT,Mutlu Turhan,Dışpınar Tuğba,Özgen Abdulkadir,Yücel Murat},
title = {Önden Yüklemeli Bir Çamaşır Makinesinin Sonlu Elemanlar Yöntemiyle Dinamik Olarak Modellenmesi},
journal = {Gazi Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi},
year = 2016,
number = 3,
pages = {773-780},
month = 10,
volume = 31
}
|
Topic
Yayın ile ilgili açıklama girilmemiştir.
|
An Implicit Meshless RBF based Dierential Quadrature Method Applied to the Lid Driven Cavity Problem
Ninth International Conference on Computational Fluid Dynamics (ICCFD9), İstanbul/TÜRKİYE, 11 Temmuz 2016
YEĞİNER YUSUF,ŞAHİN MEHMET,ALTINKAYNAK ATAKAN
@inproceedings{inproceedings,
author = {YEĞİNER YUSUF,ŞAHİN MEHMET,ALTINKAYNAK ATAKAN},
title = {An Implicit Meshless RBF based Dierential Quadrature Method Applied to the Lid Driven Cavity Problem},
year = 2016,
month = 7
}
|
Topic
Yayın ile ilgili açıklama girilmemiştir.
|
SYSTEMATIC ANALYSIS OF WASHING MACHINE FRONT BLOCK
CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING, İstanbul/TÜRKİYE, 11 Mayıs 2016
ÖZER MEHMET SAİT,KIRKAYAK LEVENT,ALTINKAYNAK ATAKAN,ATAŞ ONUR,ÖTENKUŞ UĞUR FEVZİ
@inproceedings{inproceedings,
author = {ÖZER MEHMET SAİT,KIRKAYAK LEVENT,ALTINKAYNAK ATAKAN,Ataş Onur,Ötenkuş Uğur Fevzi},
title = {SYSTEMATIC ANALYSIS OF WASHING MACHINE FRONT BLOCK},
year = 2016,
month = 5
}
|
Topic
Yayın ile ilgili açıklama girilmemiştir.
|
An Investigation of Melting and Metering Sections in a Single screw Extruder
SPE ANTEC Tech. Papers, 28 Nisan 2014, s. 1135-1141
ALTINKAYNAK ATAKAN,GUPTA MAHESH,SPALDİNG MARK,CRABTREE SAM
@inproceedings{inproceedings,
author = {ALTINKAYNAK ATAKAN,Gupta Mahesh,Spalding Mark,Crabtree Sam},
title = {An Investigation of Melting and Metering Sections in a Single screw Extruder},
year = 2014,
pages = {1135-1141},
month = 4
}
|
Topic
Yayın ile ilgili açıklama girilmemiştir.
|
Weight Optimization Of A Die Casted Part For An Engine Block
14th International Materials Symposium (IMSP), 10 Ekim 2012
PARLAR ZEYNEP,ALTINKAYNAK ATAKAN,BENLİ BURÇ
@inproceedings{inproceedings,
author = {PARLAR ZEYNEP,ALTINKAYNAK ATAKAN,Benli Burç},
title = {Weight Optimization Of A Die Casted Part For An Engine Block},
year = 2012,
month = 10
}
|
Topic
Yayın ile ilgili açıklama girilmemiştir.
|
Melting in a Single Screw Extruder: Experiments and 3D Finite Element Simulations
INTERNATIONAL POLYMER PROCESSING, Vol. 26, No. 2, Mayıs 2011, s. 182-196, ISSN: 0930-777X
ALTINKAYNAK ATAKAN,GUPTA MAHESH,SPALDİNG MARK A,CRABTREE SAM L
@article{article,
author = {ALTINKAYNAK ATAKAN,Gupta Mahesh,Spalding Mark A,Crabtree Sam L},
title = {Melting in a Single Screw Extruder: Experiments and 3D Finite Element Simulations},
journal = {INTERNATIONAL POLYMER PROCESSING},
year = 2011,
number = 2,
pages = {182-196},
month = 5,
volume = 26
}
|
Topic
Yayın ile ilgili açıklama girilmemiştir.
|
An investigation of the effect of screw geometry on melting in a single screw extruder
SPE ANTEC Tech. Papers, No. 2, 16 Mayıs 2010, s. 1508-1515
ALTINKAYNAK ATAKAN,GUPTA MAHESH,SPALDİNG MARK A,CRABTREE SAM L
@inproceedings{inproceedings,
author = {ALTINKAYNAK ATAKAN,Gupta Mahesh,Spalding Mark A,Crabtree Sam L},
title = {An investigation of the effect of screw geometry on melting in a single screw extruder},
year = 2010,
number = 2,
pages = {1508-1515},
month = 5
}
|
Topic
Yayın ile ilgili açıklama girilmemiştir.
|
An Experimental Study on Shear Stress Characteristics of Polymers inPlasticating Single Screw Extruders
POLYMER ENGINEERING AND SCIENCE, Vol. 49, No. 3, Mart 2009, s. 471-477, ISSN: 0032-3888
ALTINKAYNAK ATAKAN,GUPTA MAHESH,SPALDİNG MARK,CRABTREE SAM
@article{article,
author = {ALTINKAYNAK ATAKAN,Gupta Mahesh,Spalding Mark,Crabtree Sam},
title = {An Experimental Study on Shear Stress Characteristics of Polymers inPlasticating Single Screw Extruders},
journal = {POLYMER ENGINEERING AND SCIENCE},
year = 2009,
number = 3,
pages = {471-477},
month = 3,
volume = 49
}
|
Topic
Yayın ile ilgili açıklama girilmemiştir.
|
Shear stress and melting flux for polycarbonate resins
SPE ANTEC Tech. Papers, No. 3, 4 Mayıs 2008, s. 1401-1405
ALTINKAYNAK ATAKAN,GUPTA MAHESH,SPALDİNG MARK A,CRABTREE SAM L
@inproceedings{inproceedings,
author = {ALTINKAYNAK ATAKAN,Gupta Mahesh,Spalding Mark A,Crabtree Sam L},
title = {Shear stress and melting flux for polycarbonate resins},
year = 2008,
number = 3,
pages = {1401-1405},
month = 5
}
|
Topic
Yayın ile ilgili açıklama girilmemiştir.
|
Experimental measurement of the surface temperature of a single screw extruder screw
SPE ANTEC Tech. Papers, No. 1, 4 Mayıs 2008, s. 289-294
PHAM HOANG T,SPALDİNG MARK A,CRABTREE SAM L,PALVİCEK CALVİN L,ALTINKAYNAK ATAKAN
@inproceedings{inproceedings,
author = {Pham Hoang T,Spalding Mark A,Crabtree Sam L,Palvicek Calvin L,ALTINKAYNAK ATAKAN},
title = {Experimental measurement of the surface temperature of a single screw extruder screw},
year = 2008,
number = 1,
pages = {289-294},
month = 5
}
|
Topic
Yayın ile ilgili açıklama girilmemiştir.
|
The effect of sliding speed on the friction induced noise in polyamide steel contact
INTER-NOISE, No. 1, 28 Ağustos 2007, s. 136-144
ALTINKAYNAK ATAKAN,PARLAR ZEYNEP,TEMİZ VEDAT
@inproceedings{inproceedings,
author = {ALTINKAYNAK ATAKAN,PARLAR ZEYNEP,TEMİZ VEDAT},
title = {The effect of sliding speed on the friction induced noise in polyamide steel contact},
year = 2007,
number = 1,
pages = {136-144},
month = 8
}
|
Topic
Yayın ile ilgili açıklama girilmemiştir.
|
An experimental study on shear stress characteristics of polymers in single screw extruders
SPE ANTEC Tech. Papers, No. 1, 6 Mayıs 2007, s. 394-398
ALTINKAYNAK ATAKAN,GUPTA MAHESH,SPALDİNG MARK A,CRABTREE SAM L
@inproceedings{inproceedings,
author = {ALTINKAYNAK ATAKAN,Gupta Mahesh,Spalding Mark A,Crabtree Sam L},
title = {An experimental study on shear stress characteristics of polymers in single screw extruders},
year = 2007,
number = 1,
pages = {394-398},
month = 5
}
|
Topic
Yayın ile ilgili açıklama girilmemiştir.
|
Numerical investigation of the effect of screw temperature on the melting profile in a single screw extruder
SPE ANTEC Tech. Papers, No. 1, 6 Mayıs 2007, s. 429-433
ALTINKAYNAK ATAKAN,GUPTA MAHESH,SPALDİNG MARK A,CRABTREE SAM L
@inproceedings{inproceedings,
author = {ALTINKAYNAK ATAKAN,Gupta Mahesh,Spalding Mark A,Crabtree Sam L},
title = {Numerical investigation of the effect of screw temperature on the melting profile in a single screw extruder},
year = 2007,
number = 1,
pages = {429-433},
month = 5
}
|
Topic
Yayın ile ilgili açıklama girilmemiştir.
|
Investigation of melting in a single screw extruder
SPE ANTEC Tech. Papers, No. 1, 7 Mayıs 2006, s. 809-813
ALTINKAYNAK ATAKAN,GUPTA MAHESH,SPALDİNG MARK A,CRABTREE SAM L
@inproceedings{inproceedings,
author = {ALTINKAYNAK ATAKAN,Gupta Mahesh,Spalding Mark A,Crabtree Sam L},
title = {Investigation of melting in a single screw extruder},
year = 2006,
number = 1,
pages = {809-813},
month = 5
}
|
Topic
Yayın ile ilgili açıklama girilmemiştir.
|