Validation of Fighter Model CFD Analyzes with Experimental Data
12. ULUSLARARASI MÜHENDİSLİK MİMARLIK VE TASARIM KONGRESİ, 23 Aralık 2023
YALAZ ECE AYŞE SİBEL, ÇADIRCI SERTAÇ
@inproceedings{inproceedings,
author = {Yalaz Ece Ayşe Sibel, ÇADIRCI SERTAÇ},
title = {Validation of Fighter Model CFD Analyzes with Experimental Data},
year = 2023,
month = 12
}
|
Topic
Yayın ile ilgili açıklama girilmemiştir.
|
Investigation of inertial focusing of micro- and nanoparticles in spiral microchannels using computational fluid dynamics
AIP Publishing, Vol. 35, Kasım 2023, ISSN: 1070-6631
ALDEMİR AHMET TURAN, ÇADIRCI SERTAÇ, TRABZON LEVENT
@article{article,
author = {ALDEMİR AHMET TURAN, ÇADIRCI SERTAÇ, TRABZON LEVENT},
title = {Investigation of inertial focusing of micro- and nanoparticles in spiral microchannels using computational fluid dynamics},
journal = {AIP Publishing},
year = 2023,
month = 11,
volume = 35
}
|
Topic
Yayın ile ilgili açıklama girilmemiştir.
|
Improvement of Standard K-Epsilon Turbulence Model for Round Free Jets by Adjusting Closure Coefficients
Proceedings of the ASME 2023 International Mechanical Engineering Congress and Exposition (IMECE2023), New Orleans/AMERİKA BİRLEŞİK DEVLETLERİ, 29 Ekim 2023
TURUTOĞLU CEM, ÇADIRCI SERTAÇ
@inproceedings{inproceedings,
author = {TURUTOĞLU CEM, ÇADIRCI SERTAÇ},
title = {Improvement of Standard K-Epsilon Turbulence Model for Round Free Jets by Adjusting Closure Coefficients},
year = 2023,
month = 10
}
|
Topic
Yayın ile ilgili açıklama girilmemiştir.
|
Calibration of the k-w SST Turbulence Model for Backward Facing Step Problem Using Multi-Objective Optimization
Proceedings of the ASME 2023 International Mechanical Engineering Congress and Exposition (IMECE2023), New Orleans/AMERİKA BİRLEŞİK DEVLETLERİ, 29 Ekim 2023
YILDIZELİ ALPEREN, ÇADIRCI SERTAÇ
@inproceedings{inproceedings,
author = {YILDIZELİ ALPEREN, ÇADIRCI SERTAÇ},
title = {Calibration of the k-w SST Turbulence Model for Backward Facing Step Problem Using Multi-Objective Optimization},
year = 2023,
month = 10
}
|
Topic
Yayın ile ilgili açıklama girilmemiştir.
|
Effects of Various Baffle Designs on Center Of Gravity Deviation in a Training Aircraft Wing Fuel Tank Using 1D Simulations
Proceedings of the ASME 2023 International Mechanical Engineering Congress and Exposition (IMECE2023), New Orleans/AMERİKA BİRLEŞİK DEVLETLERİ, 29 Ekim 2023
KARAHAN KEREM, ÇADIRCI SERTAÇ
@inproceedings{inproceedings,
author = {KARAHAN KEREM, ÇADIRCI SERTAÇ},
title = {Effects of Various Baffle Designs on Center Of Gravity Deviation in a Training Aircraft Wing Fuel Tank Using 1D Simulations},
year = 2023,
month = 10
}
|
Topic
Yayın ile ilgili açıklama girilmemiştir.
|
NUMERICAL INVESTIGATION OF PLATE COOLING USING MULTIPLE IMPINGING JETS IN DIFFERENT ALIGNMENTS
Journal of Thermal Science and Technology, Vol. 43, No. 1, Nisan 2023, ISSN: 1880-5566
YILDIZELİ ALPEREN, ÇADIRCI SERTAÇ
@article{article,
author = {YILDIZELİ ALPEREN, ÇADIRCI SERTAÇ},
title = {NUMERICAL INVESTIGATION OF PLATE COOLING USING MULTIPLE IMPINGING JETS IN DIFFERENT ALIGNMENTS},
journal = {Journal of Thermal Science and Technology},
year = 2023,
number = 1,
month = 4,
volume = 43
}
|
Topic
Yayın ile ilgili açıklama girilmemiştir.
|
Investigation of the Effects of Needle Designs on the Root Canal Irrigation Using Computational Fluid Dynamics
Dokuz Eylül Üniversitesi Mühendislik Fakültesi Fen ve Mühendislik Dergisi, Vol. 25, No. 75, Ocak 2023, ISSN: 1302-9304
BULGU SELİN, YILDIZELİ ALPEREN, ÇADIRCI SERTAÇ, YILDIRIM SEMA
@article{article,
author = {Bulgu Selin, YILDIZELİ ALPEREN, ÇADIRCI SERTAÇ, Yıldırım Sema},
title = {Investigation of the Effects of Needle Designs on the Root Canal Irrigation Using Computational Fluid Dynamics},
journal = {Dokuz Eylül Üniversitesi Mühendislik Fakültesi Fen ve Mühendislik Dergisi},
year = 2023,
number = 75,
month = 1,
volume = 25
}
|
Topic
Yayın ile ilgili açıklama girilmemiştir.
|
Experimental and numerical study of the effect of the channel curvature angle on inertial focusing in curvilinear microchannels
AIP Publishing, Vol. 132, Aralık 2022, ISSN: 0021-8979
İNCE DENİZ, TURHAN HATİCE, ÇADIRCI SERTAÇ, TRABZON LEVENT
@article{article,
author = {İnce Deniz, Turhan Hatice, ÇADIRCI SERTAÇ, TRABZON LEVENT},
title = {Experimental and numerical study of the effect of the channel curvature angle on inertial focusing in curvilinear microchannels},
journal = {AIP Publishing},
year = 2022,
month = 12,
volume = 132
}
|
Topic
Yayın ile ilgili açıklama girilmemiştir.
|
CFD Strategies for Transonic Flows with OpenFOAM Using High Skewed Tetrahedral Meshes
10th International Symposium on Innovative Technologies in Engineering and Science, 21 Ekim 2022
BULUŞ HALİL, ÇADIRCI SERTAÇ
@inproceedings{inproceedings,
author = {Buluş Halil, ÇADIRCI SERTAÇ},
title = {CFD Strategies for Transonic Flows with OpenFOAM Using High Skewed Tetrahedral Meshes},
year = 2022,
month = 10
}
|
Topic
Yayın ile ilgili açıklama girilmemiştir.
|
Investigation of Grooved Heat Pipe Embedded Cold Plate Design with Additive Manufacturing
THERMINIC 2022 - 28th International Workshop on Thermal Investigations of ICs and Systems, 28 Eylül 2022
YAĞCI VEDAT, PARLAK MURAT, ÇADIRCI SERTAÇ
@inproceedings{inproceedings,
author = {Yağcı Vedat, Parlak Murat, ÇADIRCI SERTAÇ},
title = {Investigation of Grooved Heat Pipe Embedded Cold Plate Design with Additive Manufacturing},
year = 2022,
month = 9
}
|
Topic
Yayın ile ilgili açıklama girilmemiştir.
|
Numerical Investigation of Hub Ratio Effects on the Performance of Hubless Rim-Driven Propeller
International Graduate Research Symposium – IGRS’22, 1 Haziran 2022
AŞÇI ALİ BURAK, ÇADIRCI SERTAÇ, YAO HUADONG
@inproceedings{inproceedings,
author = {Aşçı Ali Burak, ÇADIRCI SERTAÇ, Yao Huadong},
title = {Numerical Investigation of Hub Ratio Effects on the Performance of Hubless Rim-Driven Propeller},
year = 2022,
month = 6
}
|
Topic
Yayın ile ilgili açıklama girilmemiştir.
|
Numerical Investigation of Boundary Layer Bleed Effects on Supersonic Air Intake Performance
International Graduate Research Symposium – IGRS’22, 1 Haziran 2022
KOÇ OSMAN KEREM, YILDIZELİ ALPEREN, ÇADIRCI SERTAÇ, KOÇ İLKER MURAT
@inproceedings{inproceedings,
author = {Koç Osman Kerem, YILDIZELİ ALPEREN, ÇADIRCI SERTAÇ, KOÇ İLKER MURAT},
title = {Numerical Investigation of Boundary Layer Bleed Effects on Supersonic Air Intake Performance},
year = 2022,
month = 6
}
|
Topic
Yayın ile ilgili açıklama girilmemiştir.
|
Dynamic Modeling and Experimental Validation of a Domestic Refrigeration Cycle
JOURNAL OF THERMAL SCIENCE AND ENGINEERING APPLICATIONS, Vol. 14, No. 7, Ocak 2022, s. 12, ISSN: 1948-5085
ÇAĞLAYAN AKIN, HUSAİN SALMAN MUSTAFA, İPEK MUTLU, AYNUR TOLGA NURETTİN, ÇADIRCI SERTAÇ
@article{article,
author = {Çağlayan Akın, Husain Salman Mustafa, İpek Mutlu, Aynur Tolga Nurettin, ÇADIRCI SERTAÇ},
title = {Dynamic Modeling and Experimental Validation of a Domestic Refrigeration Cycle},
journal = {JOURNAL OF THERMAL SCIENCE AND ENGINEERING APPLICATIONS},
year = 2022,
number = 7,
pages = {12},
month = 1,
volume = 14
}
|
Topic
Yayın ile ilgili açıklama girilmemiştir.
|
Artificial neural network model and multi-objective optimization of microchannel heat sinks with diamond-shaped pin fins
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, Vol. 194, Ocak 2022, s. 18, ISSN: 0017-9310
POLAT MUHAMMED EMİN, ÇADIRCI SERTAÇ
@article{article,
author = {Polat Muhammed Emin, ÇADIRCI SERTAÇ},
title = {Artificial neural network model and multi-objective optimization of microchannel heat sinks with diamond-shaped pin fins},
journal = {INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER},
year = 2022,
pages = {18},
month = 1,
volume = 194
}
|
Topic
Yayın ile ilgili açıklama girilmemiştir.
|
Flow Separation Control on NACA0015 Airfoil Using Synchronized Jet Actuator
JOURNAL OF APPLIED FLUID MECHANICS, Vol. 15, No. 2, Ocak 2022, s. 14, ISSN: 1735-3572
SONKAYA FATİH, ÇADIRCI SERTAÇ, ERDEM DUYGU
@article{article,
author = {Sonkaya Fatih, ÇADIRCI SERTAÇ, ERDEM DUYGU},
title = {Flow Separation Control on NACA0015 Airfoil Using Synchronized Jet Actuator},
journal = {JOURNAL OF APPLIED FLUID MECHANICS},
year = 2022,
number = 2,
pages = {14},
month = 1,
volume = 15
}
|
Topic
Yayın ile ilgili açıklama girilmemiştir.
|
Multi-objective optimization and performance assessment of microchannel heat sinks with micro pin-fins
INTERNATIONAL JOURNAL OF THERMAL SCIENCES, Vol. 174, Ocak 2022, s. 13, ISSN: 1290-0729
POLAT MUHAMMED EMİN, ÜLGER FURKAN, ÇADIRCI SERTAÇ
@article{article,
author = {Polat Muhammed Emin, Ülger Furkan, ÇADIRCI SERTAÇ},
title = {Multi-objective optimization and performance assessment of microchannel heat sinks with micro pin-fins},
journal = {INTERNATIONAL JOURNAL OF THERMAL SCIENCES},
year = 2022,
pages = {13},
month = 1,
volume = 174
}
|
Topic
Yayın ile ilgili açıklama girilmemiştir.
|
Parametric study and optimization of microchannel heat sinks with various shapes
APPLIED THERMAL ENGINEERING, Vol. 211, Ocak 2022, s. 17, ISSN: 1359-4311
KÖSE HALUK ANIL, YILDIZELİ ALPEREN, ÇADIRCI SERTAÇ
@article{article,
author = {KÖSE HALUK ANIL, YILDIZELİ ALPEREN, ÇADIRCI SERTAÇ},
title = {Parametric study and optimization of microchannel heat sinks with various shapes},
journal = {APPLIED THERMAL ENGINEERING},
year = 2022,
pages = {17},
month = 1,
volume = 211
}
|
Topic
Yayın ile ilgili açıklama girilmemiştir.
|
Investigation of Suction Flow Control on Centrifugal Compressor with Vaned Diffuser
MDPI AG, Vol. 15, Ocak 2022, ISSN: 1996-1073
AK SÜLEYMAN EMRE, ÇADIRCI SERTAÇ
@article{article,
author = {AK Süleyman Emre, ÇADIRCI SERTAÇ},
title = {Investigation of Suction Flow Control on Centrifugal Compressor with Vaned Diffuser},
journal = {MDPI AG},
year = 2022,
month = 1,
volume = 15
}
|
Topic
Yayın ile ilgili açıklama girilmemiştir.
|
Parametric Investigation on Thermal and Hydraulic Performance of Minichannel Heatsink
International Mechanical Engineering Congress and Exposition IMECE2021, Online/AMERİKA BİRLEŞİK DEVLETLERİ, 1 Kasım 2021
ATALAY OZAN, GÜLTEKİN MURAT, ÇADIRCI SERTAÇ
@inproceedings{inproceedings,
author = {ATALAY OZAN, Gültekin Murat, ÇADIRCI SERTAÇ},
title = {Parametric Investigation on Thermal and Hydraulic Performance of Minichannel Heatsink},
year = 2021,
month = 11
}
|
Topic
Yayın ile ilgili açıklama girilmemiştir.
|
NUMERICAL INVESTIGATION AND VALIDATION OF JET TEMPERATURE EFFECTS ON NOZZLE-AFTERBODY DRAG
International Mechanical Engineering Congress and Exposition IMECE2021, Online/AMERİKA BİRLEŞİK DEVLETLERİ, 1 Kasım 2021
HAZNEDAROĞLU BERKE, ÇİFTÇİ ÖMER, ÇADIRCI SERTAÇ, AYTAÇ SERHAD
@inproceedings{inproceedings,
author = {Haznedaroğlu Berke, Çiftçi Ömer, ÇADIRCI SERTAÇ, Aytaç Serhad},
title = {NUMERICAL INVESTIGATION AND VALIDATION OF JET TEMPERATURE EFFECTS ON NOZZLE-AFTERBODY DRAG},
year = 2021,
month = 11
}
|
Topic
Yayın ile ilgili açıklama girilmemiştir.
|
PARAMETRIC STUDY ON HYDRAULIC AND THERMAL PERFORMANCE OF FINNED MICROCHANNEL HEAT SINKS
15th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, 26 Temmuz 2021
POLAT MUHAMMED EMİN, ÜLGER FURKAN, ÇADIRCI SERTAÇ
@inproceedings{inproceedings,
author = {Polat Muhammed Emin, Ülger Furkan, ÇADIRCI SERTAÇ},
title = {PARAMETRIC STUDY ON HYDRAULIC AND THERMAL PERFORMANCE OF FINNED MICROCHANNEL HEAT SINKS},
year = 2021,
month = 7
}
|
Topic
Yayın ile ilgili açıklama girilmemiştir.
|
Studying dynamic stress effects on the behaviour of THP-1 cells by microfluidic channels
Scientific Reports, Vol. 11, No. 1, Ocak 2021, ISSN: 2045-2322
BİROL SEMRA ZUHAL, FUÇUCUOĞLU RANA, ÇADIRCI SERTAÇ, SAYI YAZGAN AYÇA, TRABZON LEVENT
@article{article,
author = {Birol Semra Zuhal, Fuçucuoğlu Rana, ÇADIRCI SERTAÇ, SAYI YAZGAN AYÇA, TRABZON LEVENT},
title = {Studying dynamic stress effects on the behaviour of THP-1 cells by microfluidic channels},
journal = {Scientific Reports},
year = 2021,
number = 1,
month = 1,
volume = 11
}
|
Topic
Yayın ile ilgili açıklama girilmemiştir.
|
Numerical Investigation of Active Flow Control on Laminar Forced Convection over a Backward Facing Step Surrounded by Multiple Jets
Journal of Applied Fluid Mechanics, Vol. 14, No. 2, Ocak 2021, s. 447-458, ISSN: 1735-3572
COŞKUN UMUT CAN, ÇADIRCI SERTAÇ, GÜNEŞ HASAN
@article{article,
author = {COŞKUN UMUT CAN, ÇADIRCI SERTAÇ, GÜNEŞ HASAN},
title = {Numerical Investigation of Active Flow Control on Laminar Forced Convection over a Backward Facing Step Surrounded by Multiple Jets},
journal = {Journal of Applied Fluid Mechanics},
year = 2021,
number = 2,
pages = {447-458},
month = 1,
volume = 14
}
|
Topic
Yayın ile ilgili açıklama girilmemiştir.
|
Validation of a Radial Compressor CFD Analysis
8th International Symposium on Innovative Technologies inEngineering and Science, 23 Ekim 2020
AK SÜLEYMAN EMRE,ÇADIRCI SERTAÇ
@inproceedings{inproceedings,
author = {AK Süleyman Emre,ÇADIRCI SERTAÇ},
title = {Validation of a Radial Compressor CFD Analysis},
year = 2020,
month = 10
}
|
Topic
Yayın ile ilgili açıklama girilmemiştir.
|
Multi-objective optimization of multiple impinging jet system through genetic algorithm
International Journal of Heat and Mass Transfer, Vol. 158, Eylül 2020, s. 119978, ISSN: 0017-9310
YILDIZELİ ALPEREN,ÇADIRCI SERTAÇ
@article{article,
author = {YILDIZELİ ALPEREN,ÇADIRCI SERTAÇ},
title = {Multi-objective optimization of multiple impinging jet system through genetic algorithm},
journal = {International Journal of Heat and Mass Transfer},
year = 2020,
pages = {119978},
month = 9,
volume = 158
}
|
Topic
Yayın ile ilgili açıklama girilmemiştir.
|
Numerical Investigation of Hydrodynamic and Thermal Boundary Layer Flows over a Flat Plate and Transition Control
International Journal of Advances in Engineering and Pure Sciences, Vol. 32, No. 4, Ağustos 2020, s. 390-397, ISSN: 2636-8277
CANBOLAT GÖKHAN,YILDIZELİ ALPEREN,KÖSE HALUK ANIL,ÇADIRCI SERTAÇ
@article{article,
author = {CANBOLAT GÖKHAN,YILDIZELİ ALPEREN,Köse Haluk Anıl,ÇADIRCI SERTAÇ},
title = {Numerical Investigation of Hydrodynamic and Thermal Boundary Layer Flows over a Flat Plate and Transition Control},
journal = {International Journal of Advances in Engineering and Pure Sciences},
year = 2020,
number = 4,
pages = {390-397},
month = 8,
volume = 32
}
|
Topic
Yayın ile ilgili açıklama girilmemiştir.
|
Thermal Performance Investigation of Plain Finned-Tube Evaporators Used in Household Refrigerator
Dokuz Eylül Üniversitesi Mühendislik Fakültesi Fen ve Mühendislik Dergisi, Vol. 22, No. 65, Mayıs 2020, s. 457-468, ISSN: 1302-9304
ATİCİ ÖMER ALP,ÇADIRCI SERTAÇ,APAYDIN TOLGA
@article{article,
author = {ATİCİ Ömer Alp,ÇADIRCI SERTAÇ,Apaydın Tolga},
title = {Thermal Performance Investigation of Plain Finned-Tube Evaporators Used in Household Refrigerator},
journal = {Dokuz Eylül Üniversitesi Mühendislik Fakültesi Fen ve Mühendislik Dergisi},
year = 2020,
number = 65,
pages = {457-468},
month = 5,
volume = 22
}
|
Topic
Yayın ile ilgili açıklama girilmemiştir.
|
Multi objective optimization of a micro-channel heat sink through genetic algorithm
International Journal of Heat and Mass Transfer, Vol. 146, Ocak 2020, s. 118847, ISSN: 0017-9310
YILDIZELİ ALPEREN,ÇADIRCI SERTAÇ
@article{article,
author = {YILDIZELİ ALPEREN,ÇADIRCI SERTAÇ},
title = {Multi objective optimization of a micro-channel heat sink through genetic algorithm},
journal = {International Journal of Heat and Mass Transfer},
year = 2020,
pages = {118847},
month = 1,
volume = 146
}
|
Topic
Yayın ile ilgili açıklama girilmemiştir.
|
Numerical Investigation of Unsteady Cavity Flow Aeroacoustics by Large Eddy Simulation
Dokuz Eylül Üniversitesi Mühendislik Fakültesi Fen ve Mühendislik Dergisi, Vol. 22, No. 64, Ocak 2020, s. 259-269, ISSN: 1302-9304
COŞGUN FURKAN,ÇADIRCI SERTAÇ
@article{article,
author = {COŞGUN Furkan,ÇADIRCI SERTAÇ},
title = {Numerical Investigation of Unsteady Cavity Flow Aeroacoustics by Large Eddy Simulation},
journal = {Dokuz Eylül Üniversitesi Mühendislik Fakültesi Fen ve Mühendislik Dergisi},
year = 2020,
number = 64,
pages = {259-269},
month = 1,
volume = 22
}
|
Topic
Yayın ile ilgili açıklama girilmemiştir.
|
Hesaplamalı Akışkanlar Dinamiği Temelleri ve Uygulamaları
2020, Palme Yayınevi
ENGİN TAHSİN,GÜNEŞ HASAN,ÇADIRCI SERTAÇ,KİBAR ALİ,KEMERLİ MUAZ
@book{book,
author = {ENGİN TAHSİN,GÜNEŞ HASAN,ÇADIRCI SERTAÇ,KİBAR ALİ,KEMERLİ MUAZ},
title = {Hesaplamalı Akışkanlar Dinamiği Temelleri ve Uygulamaları},
year = 2020,
publisher = {Palme Yayınevi}
}
|
Topic
Yayın ile ilgili açıklama girilmemiştir.
|
Analytical and Numerical Solutions of 1D Advection-Diffusion Equation
5TH INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING, İstanbul/TÜRKİYE, 17 Aralık 2019
CANBOLAT GÖKHAN,KÖSE HALUK ANIL,YILDIZELİ ALPEREN,ÇADIRCI SERTAÇ
@inproceedings{inproceedings,
author = {Canbolat Gökhan,Köse Haluk Anıl,Yıldızeli Alperen,ÇADIRCI SERTAÇ},
title = {Analytical and Numerical Solutions of 1D Advection-Diffusion Equation},
year = 2019,
month = 12
}
|
Topic
Yayın ile ilgili açıklama girilmemiştir.
|
Design Optimization of Triangular Microchannel Heat Sink Using Genetic Algorithm
5TH INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING, İstanbul/TÜRKİYE, 17 Aralık 2019
KÖSE HALUK ANIL,YILDIZELİ ALPEREN,ÇADIRCI SERTAÇ
@inproceedings{inproceedings,
author = {Köse Haluk Anıl,Yıldızeli Alperen,ÇADIRCI SERTAÇ},
title = {Design Optimization of Triangular Microchannel Heat Sink Using Genetic Algorithm},
year = 2019,
month = 12
}
|
Topic
Yayın ile ilgili açıklama girilmemiştir.
|
Experimental and numerical investigation of lubrication system for reciprocating compressor
INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID, Vol. 108, Aralık 2019, s. 224-233, ISSN: 0140-7007
ÖZSİPAHİ MUSTAFA,KÖSE HALUK ANIL,ÇADIRCI SERTAÇ,KERPİÇÇİ HÜSNÜ,GÜNEŞ HASAN
@article{article,
author = {ÖZSİPAHİ MUSTAFA,Köse Haluk Anıl,ÇADIRCI SERTAÇ,KERPİÇÇİ Hüsnü,GÜNEŞ HASAN},
title = {Experimental and numerical investigation of lubrication system for reciprocating compressor},
journal = {INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID},
year = 2019,
pages = {224-233},
month = 12,
volume = 108
}
|
Topic
Yayın ile ilgili açıklama girilmemiştir.
|
Investigation of Mechanical Effects on Heat Pump Evaporator to Accelerate Water Drainage
International Journal of Heat and Technology, Vol. 37, No. 4, Aralık 2019, s. 966-974, ISSN: 0392-8764
SOLMAZ SERKAN,KERPİÇÇİ HÜSNÜ,ÇADIRCI SERTAÇ
@article{article,
author = {Solmaz Serkan,KERPİÇÇİ Hüsnü,ÇADIRCI SERTAÇ},
title = {Investigation of Mechanical Effects on Heat Pump Evaporator to Accelerate Water Drainage},
journal = {International Journal of Heat and Technology},
year = 2019,
number = 4,
pages = {966-974},
month = 12,
volume = 37
}
|
Topic
Yayın ile ilgili açıklama girilmemiştir.
|
Experimental and numerical investigation on particle–particle interaction of multi-particle separation in an alternating and repetitive microchannel
MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS, Vol. 25, No. 1, Ocak 2019, s. 307-318, ISSN: 0946-7076
ÇADIRCI SERTAÇ,İNCE DENİZ,GHANEM İBRAHİM,BİROL SEMRA ZUHAL,TRABZON LEVENT,TURHAN HATİCE
@article{article,
author = {ÇADIRCI SERTAÇ,İnce Deniz,Ghanem İbrahim,Birol Semra Zuhal,TRABZON LEVENT,Turhan Hatice},
title = {Experimental and numerical investigation on particle–particle interaction of multi-particle separation in an alternating and repetitive microchannel},
journal = {MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS},
year = 2019,
number = 1,
pages = {307-318},
month = 1,
volume = 25
}
|
Topic
Yayın ile ilgili açıklama girilmemiştir.
|
Ağir İş Dizel Motoru Silindiri İçerisindeki Soğuk Hava Akışının Sayısal İncelenmesi
Marmara Fen Bilimleri Dergisi, Vol. 4, Aralık 2018, s. 445-452, ISSN: 2146-5150
AYAZ EMRAH,KÖTEN HASAN,ÇADIRCI SERTAÇ
@article{article,
author = {AYAZ Emrah,KÖTEN HASAN,ÇADIRCI SERTAÇ},
title = {Ağir İş Dizel Motoru Silindiri İçerisindeki Soğuk Hava Akışının Sayısal İncelenmesi},
journal = {Marmara Fen Bilimleri Dergisi},
year = 2018,
pages = {445-452},
month = 12,
volume = 4
}
|
Topic
Yayın ile ilgili açıklama girilmemiştir.
|
Numerical Investigation of Conjugate Heat Transfer in Rectangular Micro‐Channel Heat Sinks under Laminar Flow Conditions
6th International Symposium on Innovative Technologies inEngineering and Science, Antalya/TÜRKİYE, Vol. 1, No. 1, 9 Kasım 2018, s. 196-205, ISSN: 2667-5862
KÖSE HALUK ANIL,YILDIZELİ ALPEREN,CANBOLAT GÖKHAN,ÇADIRCI SERTAÇ
@inproceedings{inproceedings,
author = {Köse Haluk Anıl,YILDIZELİ ALPEREN,CANBOLAT GÖKHAN,ÇADIRCI SERTAÇ},
title = {Numerical Investigation of Conjugate Heat Transfer in Rectangular Micro‐Channel Heat Sinks under Laminar Flow Conditions},
year = 2018,
number = 1,
pages = {196-205},
month = 11,
volume = 1
}
|
Topic
Yayın ile ilgili açıklama girilmemiştir.
|
Numerical Investigation of Transitional Flow over a Flat Plate under Constant Heat Fluxes
6th International Symposium on Innovative Technologies in Engineering and Science, Antalya/TÜRKİYE, Vol. 1, No. 1, 9 Kasım 2018, s. 187-195, ISSN: 2667-5862
CANBOLAT GÖKHAN,YILDIZELİ ALPEREN,KÖSE HALUK ANIL,ÇADIRCI SERTAÇ
@inproceedings{inproceedings,
author = {CANBOLAT GÖKHAN,YILDIZELİ ALPEREN,Köse Haluk Anıl,ÇADIRCI SERTAÇ},
title = {Numerical Investigation of Transitional Flow over a Flat Plate under Constant Heat Fluxes},
year = 2018,
number = 1,
pages = {187-195},
month = 11,
volume = 1
}
|
Topic
Yayın ile ilgili açıklama girilmemiştir.
|
Mikrokanallarda cidar kayma gerilmesi ve basınç farkının sayısal olarak incelenmesi
Pamukkale University Journal of Engineering Sciences, Vol. 24, No. 1, Ocak 2018, s. 19-24, ISSN: 1300-7009
ÇADIRCI SERTAÇ,DEMİR UFUK,BİROL SEMRA ZUHAL,TRABZON LEVENT,GÜNEŞ HASAN
@article{article,
author = {ÇADIRCI SERTAÇ,Demir Ufuk,Birol Semra Zuhal,TRABZON LEVENT,GÜNEŞ HASAN},
title = {Mikrokanallarda cidar kayma gerilmesi ve basınç farkının sayısal olarak incelenmesi},
journal = {Pamukkale University Journal of Engineering Sciences},
year = 2018,
number = 1,
pages = {19-24},
month = 1,
volume = 24
}
|
Topic
Yayın ile ilgili açıklama girilmemiştir.
|
Dağıtılmış hava jeti kullanarak hassas cisimlerin manipülasyonunun sayısal olarak incelenmesi
VIII. Ulusal Hidrolik Pnömatik Kongresi, İstanbul/TÜRKİYE, 22 Kasım 2017
YILDIZELİ ALPEREN,KARABAY AHMET YASİN,COŞKUN UMUT CAN,ÇADIRCI SERTAÇ,VATANSEVER EMRE,SÜMER BİLSAY,KOÇ İLKER MURAT
@inproceedings{inproceedings,
author = {YILDIZELİ ALPEREN,Karabay Ahmet Yasin,COŞKUN UMUT CAN,ÇADIRCI SERTAÇ,Vatansever Emre,SÜMER BİLSAY,KOÇ İLKER MURAT},
title = {Dağıtılmış hava jeti kullanarak hassas cisimlerin manipülasyonunun sayısal olarak incelenmesi},
year = 2017,
month = 11
}
|
Topic
Yayın ile ilgili açıklama girilmemiştir.
|
Investigation on the effects of variable shear stress on monocyte cell morphology
Micro Nano Letters, Vol. 12, No. 11, Kasım 2017, s. 881-885, ISSN: 1750-0443
BİROL SEMRA ZUHAL,FUÇUCUOĞLU RANA,ÇADIRCI SERTAÇ,SAYI YAZGAN AYÇA,TRABZON LEVENT
@article{article,
author = {Birol Semra Zuhal,Fuçucuoğlu Rana,ÇADIRCI SERTAÇ,SAYI YAZGAN AYÇA,TRABZON LEVENT},
title = {Investigation on the effects of variable shear stress on monocyte cell morphology},
journal = {Micro Nano Letters},
year = 2017,
number = 11,
pages = {881-885},
month = 11,
volume = 12
}
|
Topic
Yayın ile ilgili açıklama girilmemiştir.
|
Investigation on the effects of variable shear stress on monocyte cell morphology
2017 IEEE 12th International Conference on Nano/Micro Engineered and Molecular Systems (NEMS), 9 Nisan 2017
BİROL SEMRA ZUHAL,FUÇUCUOĞLU RANA,ÇADIRCI SERTAÇ,SAYI YAZGAN AYÇA,TRABZON LEVENT
@inproceedings{inproceedings,
author = {Birol Semra Zuhal,Fuçucuoğlu Rana,ÇADIRCI SERTAÇ,SAYI YAZGAN AYÇA,TRABZON LEVENT},
title = {Investigation on the effects of variable shear stress on monocyte cell morphology},
year = 2017,
month = 4
}
|
Topic
Yayın ile ilgili açıklama girilmemiştir.
|
Improving Aerodynamic Performance for a Reliable Wiper System
International Journal of Automotive Engineering and Technologies, Vol. 6, No. 1, Mart 2017, s. 30-40, ISSN: 2146-9067
ÇADIRCI SERTAÇ,AK SÜLEYMAN EMRE,ŞELENBAŞ BUĞRA,GÜNEŞ HASAN
@article{article,
author = {ÇADIRCI SERTAÇ,AK Süleyman Emre,Şelenbaş Buğra,GÜNEŞ HASAN},
title = {Improving Aerodynamic Performance for a Reliable Wiper System},
journal = {International Journal of Automotive Engineering and Technologies},
year = 2017,
number = 1,
pages = {30-40},
month = 3,
volume = 6
}
|
Topic
Yayın ile ilgili açıklama girilmemiştir.
|
Numerical and Experimental Investigation of WiperSystem Performance at High Speeds
Journal of Applied Fluid Mechanics, Vol. 10, No. 3, Ocak 2017, s. 861-870, ISSN: 1735-3572
ÇADIRCI SERTAÇ,AK SÜLEYMAN EMRE,ŞELENBAŞ BUĞRA,GÜNEŞ HASAN
@article{article,
author = {ÇADIRCI SERTAÇ,AK Süleyman Emre,Şelenbaş Buğra,GÜNEŞ HASAN},
title = {Numerical and Experimental Investigation of WiperSystem Performance at High Speeds},
journal = {Journal of Applied Fluid Mechanics},
year = 2017,
number = 3,
pages = {861-870},
month = 1,
volume = 10
}
|
Topic
Yayın ile ilgili açıklama girilmemiştir.
|
Numerical Investigation of Turbulent Flow Over a Windscreen Wiper Blade
ASME 2016 International Mechanical Engineering Congress and Exposition, Phoenix, Arizona, USA/AMERİKA BİRLEŞİK DEVLETLERİ, 11 Kasım 2016
ÇADIRCI SERTAÇ,ÖZSİPAHİ MUSTAFA,COŞKUN UMUT CAN,AK SÜLEYMAN EMRE,GÜNEŞ HASAN,ŞELENBAŞ BUĞRA
@inproceedings{inproceedings,
author = {ÇADIRCI SERTAÇ,ÖZSİPAHİ MUSTAFA,COŞKUN UMUT CAN,AK Süleyman Emre,GÜNEŞ HASAN,Şelenbaş Buğra},
title = {Numerical Investigation of Turbulent Flow Over a Windscreen Wiper Blade},
year = 2016,
month = 11
}
|
Topic
Yayın ile ilgili açıklama girilmemiştir.
|
Numerical and Analytical Investigation of Viscous Fluids in a Screw Extruder
ASME 2016 International Mechanical Engineering Congress and Exposition, Phoenix, Arizona, USA/AMERİKA BİRLEŞİK DEVLETLERİ, 11 Kasım 2016
ÖZSİPAHİ MUSTAFA,ÇADIRCI SERTAÇ,GÜNEŞ HASAN
@inproceedings{inproceedings,
author = {ÖZSİPAHİ MUSTAFA,ÇADIRCI SERTAÇ,GÜNEŞ HASAN},
title = {Numerical and Analytical Investigation of Viscous Fluids in a Screw Extruder},
year = 2016,
month = 11
}
|
Topic
Yayın ile ilgili açıklama girilmemiştir.
|
A comparison of an analytical and numerical flow model for the lubrication system of a variable speed hermetic compressor
ISI Bilimi ve Teknigi Dergisi-Journal of Thermal Science and Technology, Vol. 36, No. 2, Ekim 2016, s. 41-49, ISSN: 1300-3615
ÖZSİPAHİ MUSTAFA,ÇADIRCI SERTAÇ,GÜNEŞ HASAN,SARIOĞLU KEMAL
@article{article,
author = {ÖZSİPAHİ MUSTAFA,ÇADIRCI SERTAÇ,GÜNEŞ HASAN,SARIOĞLU Kemal},
title = {A comparison of an analytical and numerical flow model for the lubrication system of a variable speed hermetic compressor},
journal = {ISI Bilimi ve Teknigi Dergisi-Journal of Thermal Science and Technology},
year = 2016,
number = 2,
pages = {41-49},
month = 10,
volume = 36
}
|
Topic
Yayın ile ilgili açıklama girilmemiştir.
|
Geometric Modifications to Minimize Lift Acting on a Simplified Front Windshield Wiper Blade
ISI Bilimi ve Teknigi Dergisi-Journal of Thermal Science and Technology, Vol. 36, No. 2, Ekim 2016, s. 103-109, ISSN: 1300-3615
ÇADIRCI SERTAÇ,AK SÜLEYMAN EMRE,ŞELENBAŞ BUĞRA,GÜNEŞ HASAN
@article{article,
author = {ÇADIRCI SERTAÇ,AK Süleyman Emre,Şelenbaş Buğra,GÜNEŞ HASAN},
title = {Geometric Modifications to Minimize Lift Acting on a Simplified Front Windshield Wiper Blade},
journal = {ISI Bilimi ve Teknigi Dergisi-Journal of Thermal Science and Technology},
year = 2016,
number = 2,
pages = {103-109},
month = 10,
volume = 36
}
|
Topic
Yayın ile ilgili açıklama girilmemiştir.
|
Active Flow Control behind a Backward Facing Step Using a Zero-Net-Mass-Flux-System
Int. Conf. on Jets, Wakes and Separated Flows, Stockholm/İSVEÇ, 16 Haziran 2015
COŞKUN UMUT CAN,ÇADIRCI SERTAÇ,GÜNEŞ HASAN
@inproceedings{inproceedings,
author = {COŞKUN UMUT CAN,ÇADIRCI SERTAÇ,GÜNEŞ HASAN},
title = {Active Flow Control behind a Backward Facing Step Using a Zero-Net-Mass-Flux-System},
year = 2015,
month = 6
}
|
Topic
Yayın ile ilgili açıklama girilmemiştir.
|
A numerical study on the lubrication system for a hermetic reciprocating compressor used in household refrigerators
International Journal of Refrigeration, Vol. 48, Aralık 2014, s. 210-220, ISSN: 01407007
ÖZSİPAHİ MUSTAFA,ÇADIRCI SERTAÇ,GÜNEŞ HASAN,SARIOĞLU KEMAL,KERPİÇÇİ HÜSNÜ
@article{article,
author = {ÖZSİPAHİ MUSTAFA,ÇADIRCI SERTAÇ,GÜNEŞ HASAN,SARIOĞLU Kemal,KERPİÇÇİ Hüsnü},
title = {A numerical study on the lubrication system for a hermetic reciprocating compressor used in household refrigerators},
journal = {International Journal of Refrigeration},
year = 2014,
pages = {210-220},
month = 12,
volume = 48
}
|
Topic
Yayın ile ilgili açıklama girilmemiştir.
|
Heat transfer enhancement behind a backward facing step with active flow control
ISI Bilimi ve Teknigi Dergisi-Journal of Thermal Science and Technology, Vol. 34, No. 2, Ekim 2014, s. 129-141, ISSN: 1300-3615
ÇADIRCI SERTAÇ,GÜNEŞ HASAN
@article{article,
author = {ÇADIRCI SERTAÇ,GÜNEŞ HASAN},
title = {Heat transfer enhancement behind a backward facing step with active flow control},
journal = {ISI Bilimi ve Teknigi Dergisi-Journal of Thermal Science and Technology},
year = 2014,
number = 2,
pages = {129-141},
month = 10,
volume = 34
}
|
Topic
Yayın ile ilgili açıklama girilmemiştir.
|
Inverse design of a mixed convection problem via proper orthogonal decomposition
ISI Bilimi ve Teknigi Dergisi-Journal of Thermal Science and Technology, Vol. 34, No. 2, Ekim 2014, s. 61-73, ISSN: 1300-3615
ÇADIRCI SERTAÇ,GÜNEŞ HASAN
@article{article,
author = {ÇADIRCI SERTAÇ,GÜNEŞ HASAN},
title = {Inverse design of a mixed convection problem via proper orthogonal decomposition},
journal = {ISI Bilimi ve Teknigi Dergisi-Journal of Thermal Science and Technology},
year = 2014,
number = 2,
pages = {61-73},
month = 10,
volume = 34
}
|
Topic
Yayın ile ilgili açıklama girilmemiştir.
|
Experimental Investigation of Oil Flowrate in a Hermetic Reciprocating Compressor
ASME 2014 12th Biennial Conference on Engineering Systems Design and Analysis, Copenhagen, Denmark/DANİMARKA, 25 Haziran 2014
TAŞ SİBEL,ÇADIRCI SERTAÇ,GÜNEŞ HASAN,SARIOĞLU KEMAL,KERPİÇÇİ HÜSNÜ
@inproceedings{inproceedings,
author = {TAŞ SİBEL,ÇADIRCI SERTAÇ,GÜNEŞ HASAN,SARIOĞLU Kemal,KERPİÇÇİ Hüsnü},
title = {Experimental Investigation of Oil Flowrate in a Hermetic Reciprocating Compressor},
year = 2014,
month = 6
}
|
Topic
Yayın ile ilgili açıklama girilmemiştir.
|
Numerical Simulation of Lubrication System in a Hermetic Reciprocating Compressor
ASME 2014 12th Biennial Conference on Engineering Systems Design and Analysis, Copenhagen, Denmark/DANİMARKA, 25 Haziran 2014
ÖZSİPAHİ MUSTAFA,ÇADIRCI SERTAÇ,GÜNEŞ HASAN,SARIOĞLU KEMAL,KERPİÇÇİ HÜSNÜ
@inproceedings{inproceedings,
author = {ÖZSİPAHİ MUSTAFA,ÇADIRCI SERTAÇ,GÜNEŞ HASAN,SARIOĞLU Kemal,KERPİÇÇİ Hüsnü},
title = {Numerical Simulation of Lubrication System in a Hermetic Reciprocating Compressor},
year = 2014,
month = 6
}
|
Topic
Yayın ile ilgili açıklama girilmemiştir.
|
Yersel Emme ve Üfleme ile Ters Basamak Ardındaki Akış Kontrolü ve Isı Transferinin İyileştirilmesi
III. Ulusal Havacılıkta İleri Teknolojiler Konferansı HİTEK 2014, İstanbul/TÜRKİYE, 18 Haziran 2014
COŞKUN UMUT CAN,ÇADIRCI SERTAÇ,GÜNEŞ HASAN
@inproceedings{inproceedings,
author = {COŞKUN UMUT CAN,ÇADIRCI SERTAÇ,GÜNEŞ HASAN},
title = {Yersel Emme ve Üfleme ile Ters Basamak Ardındaki Akış Kontrolü ve Isı Transferinin İyileştirilmesi},
year = 2014,
month = 6
}
|
Topic
Yayın ile ilgili açıklama girilmemiştir.
|
Heat Transfer Enhancement behind a Backward Facing Step Using Localized Suction and Blowing
Proceeding of Proceedings of CONV-14: International Symposium on Convective Heat and Mass Transfer. June 8 - 13, 2014, Kusadasi, Turkey, Antalya, Turkey/TÜRKİYE, 8 Haziran 2014
COŞKUN UMUT CAN,ÇADIRCI SERTAÇ,GÜNEŞ HASAN
@inproceedings{inproceedings,
author = {COŞKUN UMUT CAN,ÇADIRCI SERTAÇ,GÜNEŞ HASAN},
title = {Heat Transfer Enhancement behind a Backward Facing Step Using Localized Suction and Blowing},
year = 2014,
month = 6
}
|
Topic
Yayın ile ilgili açıklama girilmemiştir.
|
Numerical investigation of a jet and vortex actuator in a cross flow boundary layer
European Journal of Mechanics - B/Fluids, Vol. 44, Mart 2014, s. 42-59, ISSN: 09977546
ÇADIRCI SERTAÇ,GÜNEŞ HASAN,RIST ULRİCH
@article{article,
author = {ÇADIRCI SERTAÇ,GÜNEŞ HASAN,RIST Ulrich},
title = {Numerical investigation of a jet and vortex actuator in a cross flow boundary layer},
journal = {European Journal of Mechanics - B/Fluids},
year = 2014,
pages = {42-59},
month = 3,
volume = 44
}
|
Topic
Yayın ile ilgili açıklama girilmemiştir.
|
Numerical Investigation of JaVA-Induced Flow in Quiescent Water
ASME 2013 International Mechanical Engineering Congress and Exposition, San Diego, California, USA/AMERİKA BİRLEŞİK DEVLETLERİ, 15 Kasım 2013
ÇADIRCI SERTAÇ,GÜNEŞ HASAN,RIST ULRİCH
@inproceedings{inproceedings,
author = {ÇADIRCI SERTAÇ,GÜNEŞ HASAN,RIST Ulrich},
title = {Numerical Investigation of JaVA-Induced Flow in Quiescent Water},
year = 2013,
month = 11
}
|
Topic
Yayın ile ilgili açıklama girilmemiştir.
|
Numerical Investigation of Oil Flow in a Hermetic Compressor
Proceedings of the 2013 International Conference on Mechanics, Fluids, Heat, Elasticity and Electromagnetic Fields, Venedik/İTALYA, 28 Eylül 2013
ÖZSİPAHİ MUSTAFA,ÇADIRCI SERTAÇ,GÜNEŞ HASAN,SARIOĞLU KEMAL,KERPİÇÇİ HÜSNÜ
@inproceedings{inproceedings,
author = {ÖZSİPAHİ MUSTAFA,ÇADIRCI SERTAÇ,GÜNEŞ HASAN,SARIOĞLU Kemal,KERPİÇÇİ Hüsnü},
title = {Numerical Investigation of Oil Flow in a Hermetic Compressor},
year = 2013,
month = 9
}
|
Topic
Yayın ile ilgili açıklama girilmemiştir.
|
Hermetik Bir Kompresördeki Yağ Debisinin Sayısal İncelenemesi
19. Ulusal Isı Bilimi ve Tekniği Kongresi, Samsun/TÜRKİYE, 9 Eylül 2013
ÖZSİPAHİ MUSTAFA,ÇADIRCI SERTAÇ,GÜNEŞ HASAN,SARIOĞLU KEMAL,KERPİÇÇİ HÜSNÜ
@inproceedings{inproceedings,
author = {ÖZSİPAHİ MUSTAFA,ÇADIRCI SERTAÇ,GÜNEŞ HASAN,SARIOĞLU Kemal,KERPİÇÇİ Hüsnü},
title = {Hermetik Bir Kompresördeki Yağ Debisinin Sayısal İncelenemesi},
year = 2013,
month = 9
}
|
Topic
Yayın ile ilgili açıklama girilmemiştir.
|
Hermetik Bir Kompresördeki Yağ Debisinin Deneysel İncelenemesi
19. Ulusal Isı Bilimi ve Tekniği Kongresi, Samsun/TÜRKİYE, 9 Eylül 2013
TAŞ SİBEL,ÇADIRCI SERTAÇ,GÜNEŞ HASAN,SARIOĞLU KEMAL,KERPİÇÇİ HÜSNÜ
@inproceedings{inproceedings,
author = {TAŞ SİBEL,ÇADIRCI SERTAÇ,GÜNEŞ HASAN,SARIOĞLU Kemal,KERPİÇÇİ Hüsnü},
title = {Hermetik Bir Kompresördeki Yağ Debisinin Deneysel İncelenemesi},
year = 2013,
month = 9
}
|
Topic
Yayın ile ilgili açıklama girilmemiştir.
|
Active flow control applications with a jet and vortex actuator in a laminar cross flow
International Journal of Heat and Fluid Flow, Vol. 39, Şubat 2013, s. 146-159, ISSN: 0142727X
ÇADIRCI SERTAÇ,GÜNEŞ HASAN,RIST ULRİCH
@article{article,
author = {ÇADIRCI SERTAÇ,GÜNEŞ HASAN,RIST Ulrich},
title = {Active flow control applications with a jet and vortex actuator in a laminar cross flow},
journal = {International Journal of Heat and Fluid Flow},
year = 2013,
pages = {146-159},
month = 2,
volume = 39
}
|
Topic
Yayın ile ilgili açıklama girilmemiştir.
|
Experimental Investigation of a Jet and Vortex Actuator Using Particle Image Velocimetry
ASME 2012 International Mechanical Engineering Congress and Exposition, Houston, Texas, USA/AMERİKA BİRLEŞİK DEVLETLERİ, 9 Kasım 2012
ÇADIRCI SERTAÇ,GÜNEŞ HASAN,RIST ULRİCH,PETERS BERND
@inproceedings{inproceedings,
author = {ÇADIRCI SERTAÇ,GÜNEŞ HASAN,RIST Ulrich,Peters Bernd},
title = {Experimental Investigation of a Jet and Vortex Actuator Using Particle Image Velocimetry},
year = 2012,
month = 11
}
|
Topic
Yayın ile ilgili açıklama girilmemiştir.
|
Proper Orthogonal Decomposition Analysis of JaVA Flows for Cross-Flow Conditions
ASME 2011 International Mechanical Engineering Congress and Exposition, Denver, Colorado, USA/AMERİKA BİRLEŞİK DEVLETLERİ, 11 Kasım 2011
ÇADIRCI SERTAÇ,GÜNEŞ HASAN
@inproceedings{inproceedings,
author = {ÇADIRCI SERTAÇ,GÜNEŞ HASAN},
title = {Proper Orthogonal Decomposition Analysis of JaVA Flows for Cross-Flow Conditions},
year = 2011,
month = 11
}
|
Topic
Yayın ile ilgili açıklama girilmemiştir.
|
Optimization of a Centrifugal Fan Impeller Using Kriging Simulated Annealing
ASME 2011 International Mechanical Engineering Congress and Exposition, Denver, Colorado, USA/AMERİKA BİRLEŞİK DEVLETLERİ, 11 Kasım 2011
ÇADIRCI SERTAÇ,ŞELENBAŞ BUĞRA,GÜNEŞ HASAN
@inproceedings{inproceedings,
author = {ÇADIRCI SERTAÇ,Şelenbaş Buğra,GÜNEŞ HASAN},
title = {Optimization of a Centrifugal Fan Impeller Using Kriging Simulated Annealing},
year = 2011,
month = 11
}
|
Topic
Yayın ile ilgili açıklama girilmemiştir.
|
A Kriging-Simulated Annealing Meta-Algorithm for Optimization of Convective Heat Transfer in a Grooved Channel
ASME 2011 International Mechanical Engineering Congress and Exposition, Denver, Colorado, USA/AMERİKA BİRLEŞİK DEVLETLERİ, 11 Kasım 2011
ÇADIRCI SERTAÇ,AKGÜÇ ALPAY,GÜNEŞ HASAN
@inproceedings{inproceedings,
author = {ÇADIRCI SERTAÇ,Akgüç Alpay,GÜNEŞ HASAN},
title = {A Kriging-Simulated Annealing Meta-Algorithm for Optimization of Convective Heat Transfer in a Grooved Channel},
year = 2011,
month = 11
}
|
Topic
Yayın ile ilgili açıklama girilmemiştir.
|
Flow visualizations of jet and vortex actuator under cross flow conditions
7. International Conference on Computational Heat and Mass Transfer (ICCHMT), İstanbul/TÜRKİYE, 18 Temmuz 2011
ÇADIRCI SERTAÇ,GÜNEŞ HASAN,RIST ULRİCH,PETERS BERND
@inproceedings{inproceedings,
author = {ÇADIRCI SERTAÇ,GÜNEŞ HASAN,RIST Ulrich,Peters Bernd},
title = {Flow visualizations of jet and vortex actuator under cross flow conditions},
year = 2011,
month = 7
}
|
Topic
Yayın ile ilgili açıklama girilmemiştir.
|
Flow separation control behind a backward facing step
7. International Conference on Computational Heat and Mass Transfer (ICCHMT), İstanbul/TÜRKİYE, 18 Temmuz 2011
ÇADIRCI SERTAÇ,GÜNEŞ HASAN
@inproceedings{inproceedings,
author = {ÇADIRCI SERTAÇ,GÜNEŞ HASAN},
title = {Flow separation control behind a backward facing step},
year = 2011,
month = 7
}
|
Topic
Yayın ile ilgili açıklama girilmemiştir.
|
On the Use of POD-Models for Convective Flow in a Grooved Channel
ASME 2010 10th Biennial Conference on Engineering Systems Design and Analysis, Istanbul, Turkey/TÜRKİYE, 12 Temmuz 2010
ÇADIRCI SERTAÇ,GÜNEŞ HASAN
@inproceedings{inproceedings,
author = {ÇADIRCI SERTAÇ,GÜNEŞ HASAN},
title = {On the Use of POD-Models for Convective Flow in a Grooved Channel},
year = 2010,
month = 7
}
|
Topic
Yayın ile ilgili açıklama girilmemiştir.
|
Numerical Investigation of Jet and Vortex Actuator (JaVA) for Active Flow Control
AIAA 5th Flow Control Conference, Chicago, Illinois/AMERİKA BİRLEŞİK DEVLETLERİ, 28 Haziran 2010
ÇADIRCI SERTAÇ,GÜNEŞ HASAN,RIST ULRİCH
@inproceedings{inproceedings,
author = {ÇADIRCI SERTAÇ,GÜNEŞ HASAN,RIST Ulrich},
title = {Numerical Investigation of Jet and Vortex Actuator (JaVA) for Active Flow Control},
year = 2010,
month = 6
}
|
Topic
Yayın ile ilgili açıklama girilmemiştir.
|
Numerical Simulation of Mixed Convection in a Rectangular Cavity With Multiple Heat Sources
ASME 2009 International Mechanical Engineering Congress and Exposition, Lake Buena Vista, Florida, USA/AMERİKA BİRLEŞİK DEVLETLERİ, 13 Kasım 2009
GÜNEŞ HASAN,ÇADIRCI SERTAÇ,GÖÇMEN KENAN
@inproceedings{inproceedings,
author = {GÜNEŞ HASAN,ÇADIRCI SERTAÇ,Göçmen Kenan},
title = {Numerical Simulation of Mixed Convection in a Rectangular Cavity With Multiple Heat Sources},
year = 2009,
month = 11
}
|
Topic
Yayın ile ilgili açıklama girilmemiştir.
|
Modeling and Inverse Design of Convective Heat Transfer in a Grooved Channel Using Proper Orthogonal Decomposition
ASME 2009 International Mechanical Engineering Congress and Exposition, Lake Buena Vista, Florida, USA/AMERİKA BİRLEŞİK DEVLETLERİ, 13 Kasım 2009
GÜNEŞ HASAN,ÇADIRCI SERTAÇ
@inproceedings{inproceedings,
author = {GÜNEŞ HASAN,ÇADIRCI SERTAÇ},
title = {Modeling and Inverse Design of Convective Heat Transfer in a Grooved Channel Using Proper Orthogonal Decomposition},
year = 2009,
month = 11
}
|
Topic
Yayın ile ilgili açıklama girilmemiştir.
|
Taşınımla Isı Transferinin Kriging-Benzetilmiş Tavlama ile Modellenmesi ve Optimizasyonu
Bilimde Modern Yöntemler Sempozyumu BMYS 2008, Eskişehir/TÜRKİYE, 15 Ekim 2008
ÇADIRCI SERTAÇ,AKGÜÇ ALPAY,GÜNEŞ HASAN
@inproceedings{inproceedings,
author = {ÇADIRCI SERTAÇ,Akgüç Alpay,GÜNEŞ HASAN},
title = {Taşınımla Isı Transferinin Kriging-Benzetilmiş Tavlama ile Modellenmesi ve Optimizasyonu},
year = 2008,
month = 10
}
|
Topic
Yayın ile ilgili açıklama girilmemiştir.
|
Akış Kontrolü İçin Jet ve Vorteks Aktüatör (JaVA) Akış Tiplerinin Deneysel İncelenmesi
II. Ulusal Havacılık ve Uzay Konferansı, İstanbul/TÜRKİYE, 15 Ekim 2008
GÜNEŞ HASAN,ÇADIRCI SERTAÇ,RIST ULRİCH
@inproceedings{inproceedings,
author = {GÜNEŞ HASAN,ÇADIRCI SERTAÇ,RIST Ulrich},
title = {Akış Kontrolü İçin Jet ve Vorteks Aktüatör (JaVA) Akış Tiplerinin Deneysel İncelenmesi},
year = 2008,
month = 10
}
|
Topic
Yayın ile ilgili açıklama girilmemiştir.
|
Temporal Analysis of Jet and Vortex Actuator (JaVA)-induced Flows
International Conference on Jets, Wakes and Separated Flows, Berlin/ALMANYA, 16 Eylül 2008
GÜNEŞ HASAN,ÇADIRCI SERTAÇ,BALDANİ FRANCESCO,PETERS BERND,RIST ULRİCH
@inproceedings{inproceedings,
author = {GÜNEŞ HASAN,ÇADIRCI SERTAÇ,Baldani Francesco,Peters Bernd,RIST Ulrich},
title = {Temporal Analysis of Jet and Vortex Actuator (JaVA)-induced Flows},
year = 2008,
month = 9
}
|
Topic
Yayın ile ilgili açıklama girilmemiştir.
|
An Experimental Investigation of Jet and Vortex Actuator for Active Flow Control
AIAA 4th Flow Control Conference, Seattle, Washington/AMERİKA BİRLEŞİK DEVLETLERİ, 23 Haziran 2008
GÜNEŞ HASAN,ÇADIRCI SERTAÇ,RIST ULRİCH
@inproceedings{inproceedings,
author = {GÜNEŞ HASAN,ÇADIRCI SERTAÇ,RIST Ulrich},
title = {An Experimental Investigation of Jet and Vortex Actuator for Active Flow Control},
year = 2008,
month = 6
}
|
Topic
Yayın ile ilgili açıklama girilmemiştir.
|