Machinability of bulk metallic glass materials on milling and drilling
Advanced Materials Research, No. 83-86, 2010, s. 335-341
BAKKAL MUSTAFA
|
The Effect of Cutting Speed in Metallic Glass Grinding
AIP Conference Proceedings, Vol. 1315, 2010, s. 967-972
BAKKAL MUSTAFA
|
Electron microscopy of bulk metallic glass machining chips
Journal of Non-Crystalline Solids, No. 355, Ocak 2009, s. 2220-2223
BAKKAL MUSTAFA
|
Machinibility of zirconium based bulk metallic glass on drilling and milling
Fen Bilimleri Enstitüsü, İstanbul Teknik Üniversitesi, 2008
VELİ NAKŞİLER
|
MEASUREMENT OF THE MILLING AND GRINDING INDUCED RESIDUAL STRESSES ON BULK METALLIC GLASS BY USING HOLE DRILLING METHOD
9th International Congress on Machining, Antalya, Türkiye,, Antalya/TÜRKİYE, 8 Kasım 2018
YÜCEL AYSU HANDE, BAKKAL MUSTAFA
|
Residual stresses in a bulk metallic glass stainless steel composite
Materials Science and Engineering: A, Vol. 399, No. 1-2, Haziran 2005, s. 107-113, ISSN: 09215093
AYDINER C C,ÜSTÜNDAĞ ERSAN,CLAUSEN B,HANAN J C,WİNHOLTZ R A,BOURKE M A M,PEKER ATAKAN
|
Sliding tribological characteristics of Zr based bulk metallic glass under lubricated conditions
Intermetallics, Vol. 18, No. 6, Haziran 2010, s. 1251-1253, ISSN: 09669795
BAKKAL MUSTAFA
|
Modeling and measurement of residual stresses in a bulk metallic glass plate
Journal of Non-Crystalline Solids, Vol. 316, No. 1, Şubat 2003, s. 82-95, ISSN: 00223093
AYDINER CAHİT CAN,ÜSTÜNDAĞ ERSAN,PRİME MİCHAEL B,PEKER ATAKAN
|
Investigation of thermal residual stresses in tungsten fiber bulk metallic glass matrix composites
Scripta Materialia, Vol. 45, No. 2, Temmuz 2001, s. 245-252, ISSN: 13596462
DRAGOİ DANUT,ÜSTÜNDAĞ ERSAN,CLAUSEN B,BOURKE M A M
|
An experimental study on grinding of Zr based bulk metallic glass
Advances in Manufacturing, Vol. 3, No. 4, Aralık 2015, s. 282-291, ISSN: 2095-3127
BAKKAL MUSTAFA,SERBEST ERDİNÇ,KARİPÇİN İLKER,KUZU ALİ TANER,KARAGÜZEL UMUT,DERİN CEVAT BORA
|
An experimental study on grinding of Zr-based bulk metallic glass
Advances in Manufacturing, Vol. 3, No. 4, Aralık 2015, s. 282-291, ISSN: 2095-3127
BAKKAL MUSTAFA,KARAGÜZEL UMUT,DERİN CEVAT BORA,KARİPÇİN İLKER,SERBEST ERDİNÇ,KUZU ALİ TANER
|
Light emission chip morphology and burr formation in drilling the bulk metallic glass
International Journal of Machine Tools and Manufacture, Vol. 45, No. 7-8, Haziran 2005, s. 741-752, ISSN: 08906955
BAKKAL MUSTAFA,ALBERT J SHİH,SAMUEL B MCSPADDEN,CT LİU,RONALD O SCATTERGOOD
|
Modeling and measurement of residual stresses in a bulk metallic glass plate
Journal of Non-Crystalline Solids, Vol. 316, No. 1, Şubat 2003, s. 82-95, ISSN: 00223093
AYDİNER C C,ÜSTÜNDAĞ ERSAN,PRİME M B,PEKER ATAKAN
|
Compressive behavior of wire reinforced bulk metallic glass matrix composites
Materials Science and Engineering: A, Vol. 399, No. 1-2, Haziran 2005, s. 128-133, ISSN: 09215093
LEE S Y,CLAUSEN B,ÜSTÜNDAĞ ERSAN,CHOİ-YİM H,AYDİNER C C,BOURKE M A M
|
Residual stresses in a bulk metallic glass–stainless steel composite
Materials Science and Engineering: A, Vol. 399, No. 1-2, Haziran 2005, s. 107-113, ISSN: 09215093
AYDINER CAHİT CAN,ÜSTÜNDAĞ ERSAN,CLAUSEN BJORN,HANAN JAY C,WİNHOLTZ ROBERT A,BOURKE MARK AM,PEKER ATAKAN
|
An experimental study on grinding of Zr based bulk metallic glass
Advances in Manufacturing, Vol. 3, No. 4, Aralık 2015, s. 282-291, ISSN: 2095-3127
BAKKAL MUSTAFA,ERDİNÇ SERBEST,İLKER KARİPÇİN,KUZU ALİ TANER,KARAGÜZEL UMUT,DERİN CEVAT BORA
|
Effect of aging heat treatment on mechanical properties of expanded glass reinforced syntactic metal foam
Kovove Materialy-Metallic Materials, Vol. 59, No. 6, Ocak 2021, s. 345-355, ISSN: 0023-432X
AKGÜN İSMAİL CEM, BOLAT ÇAĞIN, GÖKŞENLİ ALİ
|
Thermal-tempering analysis of bulk metallic glass plates using an instant-freezing model
Metallurgical and Materials Transactions A, Vol. 32, No. 11, Kasım 2001, s. 2709-2715, ISSN: 1073-5623
HANAN JC,AYDİNER C C,ÜSTÜNDAĞ ERSAN
|
Elasto plastic load transfer in bulk metallic glass composites containing ductile particles
Metallurgical and Materials Transactions A, Vol. 34, No. 9, Eylül 2003, s. 1787-1797, ISSN: 1073-5623
BALCH D K,ÜSTÜNDAĞ ERSAN,DUNAND D C
|
MEASUREMENT OF THE MILLING AND GRINDING INDUCED RESIDUAL STRESSES ON BULK METALLIC GLASS BY USING HOLE DRILLING METHOD9. Ulul
9. Uluslararası Talaşlı İmalat Sempozyumu, 8 Kasım 2018
YEŞİLOVA AYSU HANDE,AKDENİZ YÜKSEL,ÜNLÜ EMRE,TİMUR AZMİ,BAKKAL MUSTAFA
|