Colour and gloss properties of pigment‐printed synthetic leather using an ultraviolet‐curable water‐borne polyurethane acrylate binder and two photoinitiators at different ratios
COLORATION TECHNOLOGY, Vol. 135, No. 2, Ocak 2019, s. 133-142, ISSN: 1472-3581
BAYSAL GÜLÇİN,KALAV BERDAN,KARAGÜZEL KAYAOĞLU BURÇAK
|
An Experimental and Numerical Study of a High Speed Planing Craft with Full-Scale Validation
Journal of Marine Science and Technology, Aralık 2019, ISSN: 1023-2796
AVCI AHMET GÜLTEKİN,BARLAS BARIŞ
|
An investigation into the smart site and smart site management as tools for reducing accidents and near-misses caused by environmental risks
International Symposium Architecture Technology Innovation 2020 "Smart Buildings, Smart Cities", İzmir/TÜRKİYE, 26 Ağustos 2020
ERUSTA NUR EFŞAN, SERTYEŞİLIŞIK BEGÜM
|
Improving hydrophobicity on polyurethane based synthetic leather through plasma polymerization for easy care effect
Journal of Coatings Technology and Research, Vol. 10, No. 4, Temmuz 2013, s. 549-558, ISSN: 1547-0091
KARAGÜZEL KAYAOĞLU BURÇAK,ÖZTÜRK EMRE,GÜNER FATMA SENİHA,UYAR TAMER
|
Effect of primary sludge fermentation products on mass balance for biological treatment
WATER SCIENCE AND TECHNOLOGY, Vol. 51, No. 11, Ocak 2005, s. 105-114, ISSN: 0273-1223
ÇOKGÖR EMİNE, OKTAY SEDA, ZENGİN BALCI GÜLSÜM EMEL, ARTAN NAZİK, ORHON DERİN
|
Effect of aspartate and glutamate on the fate of enhanced biological phosphorus removal process and microbial community structure
Bioresource Technology, Vol. 102, No. 2, Ocak 2011, s. 894-903, ISSN: 09608524
ZENGİN BALCI GÜLSÜM EMEL,ARTAN NAZİK,ORHON DERİN,SATOH HİROYASU,MİNO TAKASHİ
|
Fuzzy Linear Programming Approach for Determining the Production Amounts in Food Industry
International Conference on Recent Advances in Engineering and Technology, Berlin/ALMANYA, 29 Kasım 2015, s. 189-192
GÜNEY BAHA,TEKE ÇAĞATAY,TAŞ MEHMET
|
Dielectric property measurements of dextrose solutions for RF sensor design
2016 IEEE/ACES International Conference on Wireless Information Technology and Systems (ICWITS) and Applied Computational Electromagnetics (ACES), 13 Mart 2016
ÇAKMAK KÜBRA,ÖZTÜRK TUĞÇE,YILMAZ ABDOLSAHEB TUBA,AKDUMAN İBRAHİM
|
Prediction of N and P Loads To Recieving Water Caming From Non-Point Sources Without Using GIS and Remote Sensing Methods
The Fifth International Conference on Environmental Science and Technology, 12 Temmuz 2010
YAZĞAN MUSTAFA SAİT,UĞURLUOĞLU AYŞEGÜL
|
Acceptance of apparel private sale sites byconsumers application of original and extended technology acceptance model
THE JOURNAL OF THE TEXTILE INSTITUTE, Vol. 106, No. 10, Ekim 2015, s. 1059-1070
SARIÇAM CANAN
|
Population dynamics in a sequencing batch reactor fed with glucose and operated for enhanced biological phosphorus removal
Bioresource Technology, Vol. 101, No. 11, Haziran 2010, s. 4000-4005, ISSN: 09608524
ZENGİN BALCI GÜLSÜM EMEL,ARTAN NAZİK,ORHON DERİN,CHUA ADELİNE SM,SATOH HİROYASU,TAKASHİ MİNO
|
Impact of ultrasonic pre-treatment on domestic sludge digestion performance and microbial community dynamics
ENVIRONMENTAL TECHNOLOGY, Vol. 41, No. 7, Temmuz 2020, s. 931-943, ISSN: 0959-3330
ZENGİN BALCI GÜLSÜM EMEL,PALA ÖZKÖK İLKE,OKUTMAN TAŞ DİDEM,GÖMEÇ ÇİĞDEM,ALTINBAŞ MAHMUT,ÇOKGÖR EMİNE
|
Effect of pigment colour on the printing performance of synthetic leather using a ultraviolet‐curable water‐borne polyurethane acrylate binder
COLORATION TECHNOLOGY, Vol. 135, No. 4, Temmuz 2019, s. 283-291, ISSN: 1472-3581
BAYSAL GÜLÇİN,KALAV BERDAN,KARAGÜZEL KAYAOĞLU BURÇAK
|
Impact of aerobic stabilization on the characteristics of treatment sludge in the leather tanning industry
Environmental Technology, Vol. 35, No. 6, Mart 2014, s. 719-726, ISSN: 0959-3330
ÇOKGÖR EMİNE,AYDİNLİ EBRU,OKUTMAN TAŞ DİDEM,ZENGİN BALCI GÜLSÜM EMEL,ORHON DERİN
|
A Case Study on the Strategic Impact of Information Technology in the Turkish Construction Industry
CIB W078 International Conference on Managing IT in Construction, İstanbul/TÜRKİYE, 1 Ekim 2009, s. 431-437
ÇAKMAK FATMA PINAR,TAŞ ELÇİN FİLİZ
|
The effect of ultraviolet- curable water-borne polyurethane acrylate binder concentration on the printing performance of synthetic leather
Coloration Technology, Ekim 2018, s. 1-10, ISSN: 1472-3581
BAYSAL GÜLÇİN,KALAV BERDAN,KARAGÜZEL KAYAOĞLU BURÇAK
|
Design procedure for carbon removal in contact stabilization activatedsludge process
WATER SCIENCE AND TECHNOLOGY, Vol. 48, No. 11-12, 2003, s. 285-292
SARİOGLU M , ORHON D , GORGUN E , ARTAN N
|
The effect of different radiation sources for the UV curing of a screen printed water based polyurethane acrylate binder
Coloration Technology, Vol. 132, No. 4, Mart 2016, s. 269-279, ISSN: 14723581
AKBULUT GÖKHAN,KARAGÜZEL KAYAOĞLU BURÇAK,EREN MESUT,YILDIZ BÜLENT,ORBAY MURAT
|
2D numerical modelling of bed profile changes due to tsunami effects on near shore coasts Kadikoy case study
Water Science and Technology, Vol. 51, No. 11, Mayıs 2005, s. 231-238
KABDAŞLI MEHMET SEDAT,KIRCA VEYSEL ŞADAN ÖZGÜR,AYDINGAKKO ALPASLAN
|
Effects of CuO Sacrified Template Amounts on the Morphologies of Hematite (α-Fe2O3) Nanostructures for Photocatalytic Applications
3nd International Conference on Material Science and Technology in Cappadocia (IMSTEC’18), 17 Eylül 2018
ALP EMRE,EŞGİN HALİL,KAZMANLI MUHAMMET KÜRŞAT,GENÇ AZİZ
|