Multi-objective optimal design of hybrid viscoelastic/composite sandwich beams by using the generalized differential quadrature method and the non-dominated sorting genetic algorithm II
Structural and Multidisciplinary Optimization, Vol. 56, No. 4, Ekim 2017, s. 885-901, ISSN: 1615-147X
ARIKOĞLU AYTAÇ
|
Production and Analysis of Composite Nanofiber and Heat Applied Nanofiber
ICONTEX 2011 International Congress of Innovative Textiles, 20 Ekim 2011
AYAZ ONUR, UÇAR NURAY, BAHAR ELİF, ÖKSÜZ MUSTAFA, UÇAR MEHMET, ÖNEN AYŞEN, DEMİR ALİ , WANG YOUJUAN
|
Vibration and Damping Analysis of Sandwich Cylindrical Shells by the GDQM
AIAA JOURNAL, Vol. 57, No. 7, Temmuz 2019, s. 3040-3051, ISSN: 0001-1452
TAŞKIN MUSTAFA, ARIKOĞLU AYTAÇ, DEMİR ÖZGÜR
|
Vibration Analysis of Composite Sandwich Plates by the Generalized Differential Quadrature Method
AIAA Journal, Vol. 50, No. 3, Mart 2012, s. 620-630, ISSN: 0001-1452
ARIKOĞLU AYTAÇ,OZKOL İBRAHİM
|
Room-Temperature Mechanochemical Synthesis and Consolidation of Nanocrystalline HfB2-HfO2 Composite Powders
JOURNAL OF CERAMIC SCIENCE AND TECHNOLOGY, Vol. 9, No. 2, Haziran 2018, s. 101-118, ISSN: 2190-9385
AKÇAMLI NAZLI,AĞAOĞULLARI DUYGU,BALCI ÖZGE,ÖVEÇOĞLU MUSTAFA LUTFİ,DUMAN İSMAİL
|
Dynamic Analysis of Composite Wind Turbine Blades as Beams: An Analytical and Numerical Study
VIBRATION, Vol. 4, No. 1, Mart 2021, s. 1-15, ISSN: 2571-631X
TÜFEKCİ MERTOL, GENEL ÖMER EKİM, TATAR ALİ
|
Properties of Composite Nanofiber Produced By single and Coaxial Nozzle Method Used For Electrospinning Technique
International Conference on Nanoscience and Nanotechnology, 15 Ocak 2012
AYAZ ONUR, UÇAR NURAY, BAHAR ELİF, ÖKSÜZ MUSTAFA, ÖNEN AYŞEN, İŞMAR EZGİ, DEMİR ALİ
|
Nanosized Composite Electrodes Based on Polyaniline/Carbon Nanotubes Towards Methanol Oxidation
Current Nanoscience, Vol. 15, No. 6, s. 654-668, ISSN: 1573-4137
CİVELEKOGLU ODABAŞ MÜGE,BECERİK İPEK
|
Fabrication ofco-PVDF/modacrylic/SiO(2)nanofibrous membrane: Composite separator for safe and high performance lithium-ion batteries
JOURNAL OF APPLIED POLYMER SCIENCE, Vol. 138, No. 7, Şubat 2021, ISSN: 0021-8995
YILMAZ ŞAFAK,KILIÇ ALİ,AL RAİ ADEL,KHAN MOHAMMAD MANSOOB,STOJANOVSKA ELENA,AKGUL YASİN
|
The Production of HfO2-HfB2 Composite Powder from HfO2, B2O3, and Mg by Solid State Reaction and Subsequent Annealing
Solid State Science and Technology, Vol. 18, No. 2, Aralık 2010, s. 91-98, ISSN: 0128-7389
BALCI ÖZGE,AĞAOĞULLARI DUYGU,DUMAN İSMAİL
|
Electrochromic performance of sol gel derived amorphous MnO2 ZnO nanogranular composite thin films
JOURNAL OF NON-CRYSTALLINE SOLIDS, Vol. 427, Kasım 2015, s. 1-9, ISSN: 0022-3093
FALAHATGAR SS,GHODSI FE,TEPEHAN FATMA ZEHRA,TEPEHAN GG,TÜRHAN İBRAHİM,PISHDADIAN SE
|
Finite element analysis of deformation behavior and local damages in Al matrix SiC particulate composite microstructures
Materials Science Forum, Vol. 217, Mayıs 1996, s. 1121-1126
YILMAZ ŞAFAK,ARAN AHMET
|
Finite element analysis of thermal expansion and thermal mismatch stresses in a Cu 60vol ZrW 2 O 8 composite
Composites science and technology, Vol. 64, No. 12, Eylül 2004, s. 1895-1898
YILMAZ ŞAFAK,DAVID DUNAND
|
In situ synthesis of NbB2–NbC composite powders by milling-assisted carbothermal reduction of oxide raw materials
Advanced Powder Technology, Vol. 26, No. 4, Temmuz 2015, s. 1200-1209, ISSN: 09218831
BALCI ÖZGE,AĞAOĞULLARI DUYGU,OVALI DÖNDAŞ DİDEM,ÖVEÇOĞLU MUSTAFA LUTFİ,DUMAN İSMAİL
|
Determination of pre gelation and post gelation activationenergies during free radical crosslinking copolymerization
composite interfaces, Vol. 12, No. 5, 2005, s. 395-410
AKTAŞ DEMET,PEKCAN MEHMET ÖNDER
|
Flexural Torsional Coupled Vibration Analysis of A Thin Walled Closed Section Composite Timoshenko Beam by Using The Differential Transform Method
The Seventh International Conference on Vibration Problems, İSTANBUL/TÜRKİYE, 5 Eylül 2005, s. 293-298
KAYA METİN ORHAN,ÖZDEMİR ÖZGE
|
Vibration of anti symmetric angle ply composite plates under random excitation
Aircraft Engineering and Aerospace Technology, Vol. 79, No. 5, Eylül 2007, s. 475-484, ISSN: 0002-2667
DOĞAN VEDAT ZİYA
|
Three-dimensional multi-patch isogeometric analysis of composite laminates with a discontinuous Galerkin approach
Proceedings of the Institution of Mechanical Engineers, Part M: Journal of Engineering for the Maritime Environment, Vol. 235, No. 4, Kasım 2021, s. 820-833, ISSN: 1475-0902
OBOHAT M AMİN,TAHVİLİAN EHSAN,YILDIZDAĞ MUSTAFA ERDEN,ERGİN AHMET
|
Universal behaviour of glass transition exponentsin various polymeric systems
composite interfaces, Vol. 12, No. 6, 2005, s. 501-521
PEKCAN MEHMET ÖNDER,AKTAŞ DEMET
|
design and manufacturing of a composite drive shaft
key engineering materials, Ocak 2016
TATAROĞLU S,OK E,KAYA S,ŞEN A,DOĞAN VEDAT ZİYA,MECİTOĞLU ZAHİT,AKAY ERDEM,SÜSLER SEDAT,TÜRKMEN HALİT SÜLEYMAN
|