Compressive Strength and Rapid Chloride Permeability of Concretes with Ground Fly Ash and Slag
Journal of Materials in Civil Engineering, Vol. 21, No. 9, 2009, s. 494-501, ASCE
OZKAN SENGUL AND MEHMET A. TASDEMIR
|
Influence of Aggregate Type on the Mechanical Behaviour of Normal and High Strength Concretes
ACI Materials Journal, Vol. 99, No. 6, 2002, s. 528-533
OZKAN SENGUL, CANAN TASDEMIR, MEHMET ALI TASDEMIR
|
Compressive Strength and Rapid Chloride Permeability of Concretes with Ground Fly Ash and Slag
Journal of Materials in Civil Engineering, Vol. 9, No. 21, 2009, s. 494-501, ASCE
, OZKAN SENGUL AND MEHMET A. TASDEMIR
|
Influence of Aggregate Type on the Mechanical Behaviour of Normal and High Strength Concretes
ACI Materials Journal, Vol. 99, No. 6, 2002, s. 528-533
OZKAN SENGUL, CANAN TASDEMIR, MEHMET ALI TASDEMIR
|
Compressive Strength and Rapid Chloride Permeability of Concretes with Ground Fly Ash and Slag
Journal of Materials in Civil Engineering, Vol. 21, No. 9, Eylül 2009, s. 494-501, ISSN: 0899-1561
ŞENGÜL ÖZKAN,MEHMET ALİ TAŞDEMİR
|
Influence of aggregate type on mechanical behavior of normal andhigh strength concretes
ACI MATERIALS JOURNAL, Vol. 99, No. 6, Kasım 2002, s. 528-533
ŞENGÜL ÖZKAN,TAŞDEMİR CANAN,MEHMET ALİ TAŞDEMİR
|
Investigation of Heat Treatment Effect on Mechanical Properties of High Strength Steel Bolt Material
MODERN METHODS OF CONSTRUCTION DESIGN, Ocak 2014, s. 89-95, ISSN: 2195-4356
PALABIYIK İBRAHİM MEHMET, BOZCA MEHMET, KINIT UMUT, SEVİNÇ A., BÜYÜKALGAN UH
|
Optimum Usage of a Natural Pozzolan for The Maximum Compressive Strength of Concrete
CEMENT AND CONCRETE RESEARCH, Vol. 34, No. 12, Aralık 2004, s. 2175-2179, ISSN: 0008-8846
PEKMEZCİ BEKİR YILMAZ,SAİM AKYÜZ
|
Residual ultimate strength of a very large crude carrier considering probabilistic damage extents
INTERNATIONAL JOURNAL OF NAVAL ARCHITECTURE AND OCEAN ENGINEERING, Vol. 6, No. 1, Mart 2014, s. 14-26
CHOUNG JOONMO,NAM JI MYUNG,TAYYAR GÖKHAN TANSEL
|
DYNAMIC STRENGTH EXPERIMENTS THROUGH A BLOCK MODELING APPROACH FOR THE EASTERN MEDITERRANEAN REGION
American Geophysical Union Fall Meeting AGU 2015, San Francisco/AMERİKA BİRLEŞİK DEVLETLERİ, 14 Aralık 2015
ÖZEREN MEHMET SİNAN,ELLİOT KLEİN,GERALD GALGANA,ŞENGÖR ALİ MEHMET CELAL
|
Assessment of Ultimate Longitudinal Strength of a VLCC considering Kinematic Displacement Theory
Journal of the Society of Naval Architects of Korea, Vol. 50, No. 4, Ağustos 2013, s. 255-261, ISSN: 1225-1143
CHOUNG JOONMO,NAM JI MYUNG,TAYYAR GÖKHAN TANSEL,YOON SUNG WON,LEE KANGSU
|
A new approximate method to evaluate the ultimate strength of ship hull girder
14th International Congress of the International Maritime Association of the Mediterranean, 13 Eylül 2011
TAYYAR GÖKHAN TANSEL,BAYRAKTARKATAL ERTEKİN
|
Development of a failure strain surface in average stress triaxiality and average lode angle domains of a low temperature high strength steel
Marstruct, 25 Mart 2015
CHOUNG JOONMO,PARK SJ,TAYYAR GÖKHAN TANSEL
|
Longitudinal Ship Strength using KDT by considering geometric and Material nonlinearity
The 28th Asian-Pacific Technical Exchange andAdvisory Meeting on Marine Structures, 13 Ekim 2014
KAHRAMAN İSMAİL,TAYYAR GÖKHAN TANSEL
|
Structural performance of recycled aggregates concrete sourced from low strength concrete
STRUCTURAL ENGINEERING AND MECHANICS, Vol. 69, No. 1, Ocak 2019, s. 77-93, ISSN: 1225-4568
GOKSU CAGLAR,SARIBAŞ İLYAS,BİNBİR ERGUN,AKKAYA YILMAZ,İLKİ ALPER
|
Fuzzy Logic Modelling of Schmidt Hardness Determining Uniaxial Compressive Strength
ISRM Int. Symp. on Rock Engineering for Mountainous Regions (Eurock 2002), 25 Kasım 2002, s. 61-66
ÖZTÜRK C.A., NASUF E.
|
Estimation of rock strength from quantitative assessment of rock texture
Journal of South African Institute of Mining and Metallurgy, Vol. 114, Haziran 2014, s. 471-480
ÖZTÜRK CÜNEYT ATİLLA,NASUF SABRİ ERKİN,KAHRAMAN SAİR
|
IMPROVEMENT OF MECHANICAL STRENGTH OF IRON ORE PELLETS USING RAW AND ACTIVATED BENTONITES AS BINDERS
PHYSICOCHEMICAL PROBLEMS OF MINERAL PROCESSING, Vol. 51, No. 1, 2015, s. 23-36, ISSN: 1643-1049
GÜL ALİM,SİRKECİ AYHAN ALİ,BOYLU FERİDUN,GÜNSER GÜLDAN,BURAT FIRAT
|
On the frother's strength and its performance
Minerals Engineering, Vol. 171, No. 1, Eylül 2021, s. 1-10, ISSN: 0892-6875
KARAKASHEV STOYAN I., GROZEV NİKOLAY A., ÖZDEMİR ORHAN, BATJARGAL KHANDJAMTS, GÜVEN ONUR, ATA SEHER, BOURNEVAL GHİSLAİN, BOYLU FERİDUN, ÇELİK MEHMET SABRİ
|
The Effect of Lap Splice Length on the Cyclic Lateral Load Behavior of RC Members with Low-Strength Concrete and Plain Bars
Advances in Structural Engineering, Vol. 17, No. 5, 2014, s. 639-658
GOKSU CAGLAR,YİLMAZ HAKAN,CHOWDHURY SR,ORAKÇAL KUTAY,İLKİ ALPER
|