Eklemeli imalat destekli dereceli hassas döküm yöntemi ile bal peteği yapıların üretimi ve karakterizasyonu
Fen Bilimleri Enstitüsü, İstanbul Teknik Üniversitesi, 2019
FATİH GÜLER
|
EKLEMELİ İMALAT VE PLASTİK ENJEKSİYON KALIPLAMA YÖNTEMİYLE ÜRETİLEN PARÇALARIN BAĞLANMA ARAYÜZ MUKAVEMETİNİN DENEYSEL OLARAK İNCELENMESİ
Lisansüstü Eğitim Enstitüsü, İstanbul Teknik Üniversitesi, 2024
EMRE BECERİK
|
Soğuk sprey eklemeli imalat yöntemiyle üretilen ınconel 718 süperalaşımının yüzey özelliklerine kutu alüminyumlama işleminin etkisi
Lisansüstü Eğitim Enstitüsü, İstanbul Teknik Üniversitesi, 2024
OSMAN KAHRAMAN
|
Effect of scanning speed on the damage behaviour of SLM printed Inconel 625
BSSM 18th International Conference on Advances in Experimental Mechanics, Liverpool/İNGİLTERE, 3 Eylül 2024
YILDIZ RAŞİD AHMED,MALEKAN MOHAMMAD
|
On the surface roughness of 316L stainless steel fabricated using L-PBF additive manufacturing
NORTRIB 2024, Copenhagen/DANİMARKA, Vol. 41, 11 Haziran 2024, s. 54-56
YILDIZ RAŞİD AHMED,ÖZDOĞAN CANSIN,MALEKAN MOHAMMAD
|
Mechanical performance and ANNbased prediction of Co-Cr dental alloys with gyroid cellular structures produced by LPBF technology
Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Ocak 2025, ISSN: 0954-4062
ÇALIŞKAN CEMAL İRFAN,ŞAHİN MERYEM,KOCA ALİİHSAN,TARAKÇI GÜRKAN,OKBAZ ABDULKERİM,DALKILIÇ AHMET SELİM
|
Evaluation of Lattice Material Suitability for Additive Manufactured Gears under Compression Loads
Transactions of the Indian Institute of Metals, Vol. 78, No. 36, Ocak 2025, s. 1-11, ISSN: 0972-2815
ÇALIŞKAN CEMAL İRFAN,KHAN HAMAID MAHMOOD,ÖZER GÖKHAN,BULDUK MUSTAFA ENES,COŞKUN MERT
|
Investigation of Defect Growth in L-PBF Printed AlSi10Mg Alloy.
Additive Manufacturing Conference, 28 Nisan 2025
ERER ŞEVVAL,YAMAN KORAY,EROL ULAŞ CAN,KAYIHAN METE,GÖKÇEKAYA ÖZKAN,YILDIZ RAŞİD AHMED,MALEKAN MOHAMMAD
|
3D Printable BN/PEEK/PEI Polymer Blend Composites for Thermal Management Applications
AIAA SCITECH 2024 Forum, Orlando/AMERİKA BİRLEŞİK DEVLETLERİ, 8 Ocak 2024
BOZKURT YUNUS EMRE,KINCAL CEM,YÜKSEL RAMAZAN,YILDIZ ALPTEKİN,SOLAK NURİ,CEBECİ HÜLYA
|
Investigation of the Flexural Fatigue Characteristics of Lattice Structures in Dental Applications
2. International Dental Congress on Additive Manufacturing (IDCAM 2024), 30 Mayıs 2024
ŞAHİN MERYEM,ÇALIŞKAN CEMAL İRFAN,MUTLU İLVEN
|
Investigation of direct metal laser sintering downskin parameters’ sagging effect on microchannels
The International Journal of Advanced Manufacturing Technology, Vol. 114, Nisan 2021, s. 2567-2575, ISSN: 0268-3768
ÇALIŞKAN CEMAL İRFAN, ÖZER GÖKHAN, COŞKUN MERT, KOÇ EBUBEKİR
|
Recycling of Laser Powder Bed Fusion Scraps in Conventional Plastic Injection Systems
Journal of Polymers and the Environment, Vol. 32, No. 1, Ocak 2024, s. 277-288, ISSN: 1566-2543
ÇALIŞKAN CEMAL İRFAN, ÖZER GÖKHAN, BULDUK MUSTAFA ENES, SARITAŞ UMUR SEZER
|
YAPI ÜRETİMİNDE EKLEMELİ İMALAT TEKNOLOJİLERİNİN KARŞILAŞTIRMALI DEĞERLENDİRMESİ
Uludağ University Journal of The Faculty of Engineering, Vol. 25, No. 2, Ocak 2020, s. 1117-1136, ISSN: 2148-4147
ÇALIŞKAN CEMAL İRFAN, ARPACIOĞLU ÜMİT TURGAY
|
A novel synchronous scanning strategy in laser powder bed fusion and effect on mechanical properties of industrial gears
The International Journal of Advanced Manufacturing Technology, Vol. 128, Ağustos 2023, s. 2459-2467, ISSN: 0268-3768
ÇALIŞKAN CEMAL İRFAN
|
DMLS Eklemeli İmalat'ta Silindirik Olmayan Uyumlu Soğutma (USK) Kanal Geometrilerinin 316L ile Üretilebilirlik Araştırması
10th INTERNATIONAL CONGRESS ON ENGINEERING, ARCHITECTURE AND DESIGN, İstanbul/TÜRKİYE, 24 Aralık 2022
ÇALIŞKAN CEMAL İRFAN
|
Double Stud Cargo Fitting Research, Alternative Cargo Clip Design and Analysis
International Journal of Aviation, Aeronautics, and Aerospace, Vol. 6, No. 5, Ocak 2019, s. 1-20, ISSN: 2374-6793
ÇALIŞKAN CEMAL İRFAN, KOÇ EBUBEKİR, KHAN HAMAID MAHMOOD, BULDUK MUSTAFA ENES
|
Estimation of surface roughness in selective laser sintering using computational models
The International Journal of Advanced Manufacturing Technology, Vol. 123, Ocak 2022, s. 3033-3045, ISSN: 0268-3768
KOÇ EBUBEKİR, ZEYBEK SULTAN, ÖZBAY KISASÖZ BURÇİN, ÇALIŞKAN CEMAL İRFAN, BULDUK MUSTAFA ENES
|
Investigating temperature, stress, and residual stresses in laser powder bed fusion additive manufacturing of Inconel 625
Materials Today Communications, Vol. 41, Aralık 2024, s. 1-11, ISSN: 2352-4928
GHASEMİ ALİ,YILDIZ RAŞİD AHMED,MALEKAN MOHAMMAD
|
Creep resistance enhancement and modeling of 3D printed Polyetherimide/carbon black composites
Composite Structures, Vol. 345, Ekim 2024, ISSN: 0263-8223
KARABAL MERVE,YILDIZ ALPTEKİN
|
Direct 3D Printing of Strain Sensors onto 3D Woven Orthogonal Composite Structures: Evaluating Two Distinct Approaches for Sensor Performance
AIAA SCITECH 2024 Forum, Orlando/AMERİKA BİRLEŞİK DEVLETLERİ, 8 Ocak 2024
KARABAL MERVE,DİNÇER MELİSA,YÜKSEL RAMAZAN,AKYAZICI ZEYNEP NUR,YILDIZ ALPTEKİN,CEBECİ HÜLYA
|