OPTIMUM CONNECTING ROD DESIGN FOR DIESEL ENGINES
XXIV INTERNATIONAL SCIENTIFIC AND TECHNICALCONFERENCE ON TRANSPORT, ROAD-BUILDING,AGRICULTURAL, HOISTING & HAULING ANDMILITARY TECHNICS AND TECHNOLOGIES, Varna/BULGARİSTAN, 29 Haziran 2016, s. 96-100, ISSN: 13103946
KAYA TOLGA,TEMİZ VEDAT,PARLAR ZEYNEP
|
Optimum Connecting Rod Design for Diesel Engines
International Scientific Journal Trans Motauto World, Vol. 1, No. 2, Temmuz 2016, s. 7-11, ISSN: 2367-8399
KAYA TOLGA, TEMİZ VEDAT, PARLAR ZEYNEP
|
Optimum design of a column side reactor process
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, Vol. 46, No. 15, Ocak 2007, s. 5175-5185, ISSN: 0888-5885
KAYMAK DEVRİM BARIŞ,LUYBEN WİLLİAM L
|
Optimum Mix Design of Steel Fibre Reinforced Concrete Plates
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING, Vol. 38, No. 11, Kasım 2013, s. 2971-2983
KÖKSAL FUAT,İLKİ ALPER,TAŞDEMİR MEHMET ALİ
|
Multi-objective optimum design of an alpha type Stirling engine using meta-models and co-simulation approach
Energy Conversion and Management, Vol. 232, No. 113878, Mart 2021, ISSN: 0196-8904
YILDIZ CENGİZ, BAYATA FATMA, MUGAN ATA
|
Determination of optimum dose of adsorbent for PCDD F removal in the flue gas of a medical waste incineration plant
Chemical Engineering Research and Design, Vol. 104, Aralık 2015, s. 695-702, ISSN: 02638762
GÜNEŞ GÜLTEN,SARAL ARSLAN,YILDIZ ŞENOL,KUZU SADULLAH LEVENT
|
In Search of the Proper Dimensions of the Optimum In-Wheel Permanent Magnet Synchronous Motor Design
Energies, Vol. 17, No. 5, Şubat 2024, ISSN: 1996-1073
ÇABUK ALİ SİNAN, ÜSTÜN ÖZGÜR
|
Structural identification St Id using finite element models for optimum sensor configuration and uncertainty quantification
Finite Elements in Analysis and Design, Amsterdam/HOLLANDA, Vol. 81, Nisan 2014, s. 1-13, ISSN: 0168874X
ERDOĞAN YILDIRIM SERHAT,ÇATBAŞ NECATİ,GÜNDEŞ BAKIR PELİN
|
Optimum design parameters of a heat exchanger
Applied Energy, Vol. 82, No. 1, Eylül 2005, s. 90-106, ISSN: 03062619
ŞAHİN BAYRAM,YAKUT KENAN,KOTCİOĞLU İSAK,ÇELİK CAFER
|
A Taguchi approach for determination of optimum design parameters for a heat exchanger having circular cross sectional pin fins
Heat and Mass Transfer, Vol. 43, No. 5, Ocak 2007, s. 493-502, ISSN: 0947-7411
ŞAHİN BAYRAM
|
Optimum design parameters of a heat exchanger having hexagonal fins
Applied Energy, Vol. 83, No. 2, Şubat 2006, s. 82-98, ISSN: 03062619
YAKUT KENAN,ALEMDAROĞLU NİHAL,ŞAHİN BAYRAM,ÇELİK CAFER
|
Thermal performance analysis and optimum design parameters of heat exchanger having perforated pin fins
Energy Conversion and Management, Vol. 49, No. 6, Haziran 2008, s. 1684-1695, ISSN: 01968904
ŞAHİN BAYRAM,DEMİR ALPARSLAN
|
Determination of The Optimum Design Parameters of Pb-Zn Mine Tailing Dam Using 2D Modelling
26th International Symposium On Mine Planning and Equipment Selection (MPES 2017), Lulea/İSVEÇ, 29 Ağustos 2017, s. 353-355
BAŞÇETİN ATAÇ,ADIGÜZEL DENİZ,ODABAŞ EREN,TÜYLÜ SERKAN,EKER HASAN
|