Investigating Performance of High-Rate GNSS-PPP and PPP-AR for Structural Health Monitoring: Dynamic Tests on Shake Table
Journal of Surveying Engineering, Vol. 147, No. 1, Ocak 2021, s. 1-14, ISSN: 0733-9453
YİĞİT CEMAL ÖZER,EL-MOWAFY AHMED,DİNDAR AHMET ANIL,BEZCİOĞLU MERT,TİRYAKİOĞLU İBRAHİM
|
A set of indices based on indentation tests for assessment of rock cutting performance and rock properties
Journal of The South African Institute of Mining and Metallurgy, Kasım 2003
COPUR HANİFİ,BİLGİN NUH,TUNCDEMİR HAKAN,BALCI CEMAL
|
Correlation of rock cutting tests with field performance of a TBM in a highly fractured rock formation A case study in Kozyatagi Kadikoy metro tunnel Turkey
Tunnelling and Underground Space Technology, Vol. 24, No. 4, Temmuz 2009, s. 423-435, ISSN: 08867798
BALCI CEMAL
|
Physico mechanical property tests towards performance prediction of chain sawmachines
THE FIFTH THAILAND SYMPOSIUM ON ROCK MECHANICS, 22 Ocak 2015
TUMAÇ DENİZ,AVUNDUK EMRE,BAŞYİĞİT MİKAİL,ÇOPUR HANİFİ,BALCI CEMAL,ER SELMAN
|
TBM Performance Prediction using Laboratory Cutting Tests in Very Hard and Abrasive Rock Formations
International Conference on Tunnel Boring Machines in Difficult Grounds (TBM DiGs), Wuhan/ÇİN HALK CUMHURİYETİ, 21 Kasım 2017, s. 1-11
BİLGİN NUH,ÇOPUR HANİFİ,BALCI CEMAL,TUMAÇ DENİZ
|
Physico Mechanical Property Tests Towards Performance Prediction of Chain Saw Machines
The Fifth Thailand Symposium on Rock Mechanics- Thairock 2015, Bangkok/TAYLAND, Vol. 381, No. 387, 22 Ocak 2015
TUMAÇ DENİZ,AVUNDUK EMRE,BAŞYİĞİT MİKAİL,ÇOPUR HANİFİ,BALCI CEMAL,SELMAN ER
|
Full Scale Linear Cutting tests towords Performance Prediction of Chain Saw Machines
Proc. of the 20th International Mining Congress and Exhibition- IMCET 2007, 6 Haziran 2007, s. 161-169
ÇOPUR HANİFİ,BALCI CEMAL,BİLGİN NUH,TUMAÇ DENİZ,İLKE DÜZYOL
|
The Selection of a Tbm Using Full Scale Laboratory Tests and Comparison of Measured and Predicted Performance Values in Istanbul Kozyatagi Kadikoy Metro Tunnels
World Tunnel Congress-2008, 10 Mayıs 2005, s. 1509-1517
BİLGİN NUH,ÇOPUR HANİFİ,BALCI CEMAL,TUMAÇ DENİZ,MUSTAFA AKGUL,ALİ YUKSEL
|
Integrated Process Control-Power Management System Design and Flight Performance Tests for Fuel Cell Powered Mini-Unmanned Aerial Vehicle
ENERGY TECHNOLOGY, Vol. 9, No. 3, Mart 2021, ISSN: 2194-4288
ERDÖR TÜRK BETÜL, SARUL MUSTAFA HADİ, ÇENGELCİ EKREM, KARADAĞ ÇİĞDEM, BOYACI SAN FATMA GÜL, KILIÇ MURAT, OKUMUŞ EMİN, YAZICI MEHMET SUHA
|
TBM Performance Prediction using Laboratory Cutting Tests in Very Hard and Abrasive Rock Formations
International Conference on Tunnel Boring Machines in Difficult Grounds (TBM DiGs), Wuhan/ÇİN HALK CUMHURİYETİ, 21 Kasım 2017, s. 1-11
BİLGİN NUH,ÇOPUR HANİFİ,BALCI CEMAL,TUMAÇ DENİZ
|
Physico mechanical property tests towards performance prediction of chain saw machines
Rock Mechanics Proceedings of Fifth Thailand Syp, 22 Ocak 2015
TUMAC DENİZ,AVUNDUK EMRE,MİKAİL BASYİGİT,HANİFİ COPUR,BALCI CEMAL,ER SEMİH
|
TBM Performance Prediction using Laboratory Cutting Tests in Very Hard and Abrasive Rock Formations
3rd International Conference on Tunnel Boring Machines in Difficult Grounds (TBM DiGs), Wuhan/ÇİN HALK CUMHURİYETİ, 16 Kasım 2017
BİLGİN NUH,ÇOPUR HANİFİ,BALCI CEMAL,TUMAÇ DENİZ
|
A set of indices based on indentation tests for assessment of rock cutting performance and rock properties
The Journal of The South African Institute of Mining and Metallurgy, Vol. 103, No. 9, Kasım 2003, s. 589-599, ISSN: 0038223X300000
ÇOPUR HANİFİ,BİLGİN NUH,TUNÇDEMİR HAKAN,BALCI CEMAL
|
TBM Performance Prediction using Laboratory Cutting Tests in Very Hard and Abrasive Rock Formations
3rd International Conference on Tunnel Boring Machines in Difficult Grounds (TBM DiGs), Wuhan/ÇİN HALK CUMHURİYETİ, 16 Kasım 2017
BİLGİN NUH,ÇOPUR HANİFİ,BALCI CEMAL,TUMAÇ DENİZ
|
TBM Performance Prediction using Laboratory Cutting Tests in Very Hard and Abrasive Rock Formations
International Conference on Tunnel Boring Machines in Difficult Grounds (TBM DiGs), Wuhan/ÇİN HALK CUMHURİYETİ, 21 Kasım 2017, s. 1-11
BİLGİN NUH,ÇOPUR HANİFİ,BALCI CEMAL,TUMAÇ DENİZ
|
Analysis of Combustion Regimes in Compression Ignited Engines Using Parametric T Dynamic Maps
SAE Technical Papers, No. 2007-01-1838, Temmuz 2007
GOLOVİTCHEV VALERİ I., CALİK ALPER T., MONTORSİ LUCA
|
Linear stone cutting tests with chisel tools for identification of cutting principles and predicting performance of chain saw machines
International Journal of Rock Mechanics and Mining Sciences, Vol. 47, No. 1, Ocak 2010, s. 104-120, ISSN: 13651609
ÇOPUR HANİFİ
|
A set of indices based on indentation tests for assessment of rock cutting performance and rock properties
Journal of South African Institute of Mining and Metallurgy, Vol. 103, No. 9, Kasım 2003, s. 589-600, ISSN: 0038223X
ÇOPUR HANİFİ,BİLGİN NUH,TUNÇDEMİR HAKAN,BALCI CEMAL
|
A Review on Practicality of Cognitive Performance Tests in Deck Officer Selection
III. Global Conference on Innovation in Marine Technology and the Future of Maritime Transportation, GMC ’19, 18 Nisan 2019, s. 499-513
KÖSEOĞLU MESUT CAN,TAVACIOĞLU LEYLA,TAÇ UMUT,ESKİ ÖZGE,GÖKMEN NESLİHAN
|
Design, characterization,and performance tests of nanofibrous filter for removal of volatile organic compounds (VOCs) by photocatalytic oxidation (PCO) for aircraft cabin air filtration applications
Fen Bilimleri Enstitüsü, İstanbul Teknik Üniversitesi, 2015
ARDA KÜÇÜKSARI
|