Three-point bending test of pantographic blocks: numerical and experimental investigation
MATHEMATICS AND MECHANICS OF SOLIDS, Vol. 25, No. 10, Ekim 2020, s. 1965-1978, ISSN: 1081-2865
YILDIZDAĞ MUSTAFA ERDEN,BARCHİESİ EMİLİO,DELL’ISOLA FRANCESCO
|
Are higher-gradient models also capable of predicting mechanical behavior in the case of wide-knit pantographic structures?
MATHEMATICS AND MECHANICS OF SOLIDS, Vol. 26, No. 1, Ocak 2021, s. 18-29, ISSN: 1081-2865
SPAGNUOLO MARİO,YILDIZDAĞ MUSTAFA ERDEN,ANDREAUS UGO,CAZZANİ ANTONİO M
|
Multipatch discontinuous Galerkin isogeometric analysis of composite laminates
Continuum Mechanics and Thermodynamics, Vol. 32, No. 3, Mayıs 2020, s. 607-620, ISSN: 0935-1175
YILDIZDAĞ MUSTAFA ERDEN,DEMİRTAS MURAT,ERGİN AHMET
|
On the wave dispersion in microstructured solids
Continuum Mechanics and Thermodynamics, Vol. 32, No. 3, Mayıs 2020, s. 569-588, ISSN: 0935-1175
BEREZOVSKİ ARKADİ,YILDIZDAĞ MUSTAFA ERDEN,SCERRATO DARİA
|
Predicting the performance of large diameter circular saws based on Schmidt hammer and other properties for some Turkish carbonate rocks
International Journal of Rock Mechanics and Mining Sciences, Vol. 75, Nisan 2015, s. 159-168, ISSN: 13651609
TUMAÇ DENİZ
|
Aircraft icing detection, identification and reconfigurable control based on Kalman filtering and neural networks
AIAA Atmospheric Flight Mechanics Conference and Exhibit, 6220, 15 Ağustos 2005
AYKAN RAHMİ,HACIZADE CENGİZ,ÇALIŞKAN FİKRET
|
Investigation into the Effects of Textural Properties on Cuttability Performance of a Chisel Tool
ROCK MECHANICS AND ROCK ENGINEERING, Vol. 51, Nisan 2018, s. 1127-1248, ISSN: 0723-2632
TUMAÇ DENİZ,ÇOPUR HANİFİ,BALCI CEMAL,ER SELMAN,AVUNDUK EMRE
|
Cuttability of coal from the Soma coalfield in Turkey
International Journal of Rock Mechanics and Mining Sciences, Vol. 73, Ocak 2015, s. 123-129, ISSN: 13651609
BİLGİN NUH,BALCI CEMAL,ÇOPUR HANİFİ,TUMAÇ DENİZ,AVUNDUK EMRE
|
Estimation of Rock Cuttability from Shore Hardness and Compressive Strength Properties
Rock Mechanics and Rock Engineering, Vol. 40, No. 5, Ekim 2007, s. 477-490, ISSN: 0723-2632
TUMAÇ DENİZ,BİLGİN NUH,CENK FERİDUNOGLU,ERGİN HASAN
|
Effect of Difficult Ground Conditions on Double Shield TBM Performance
9th Asian Rock Mechanics Symposium-ARMS9, Bali/ENDONEZYA, No. 9 pages, 18 Ekim 2016
AVUNDUK EMRE,SHATERPOUR MAMAGHANİ AYDIN,TUMAÇ DENİZ
|
Homogenization coarse graining (HCG) of the lattice discrete particle model (LDPM) for the analysis of reinforced concrete structures
Engineering Fracture Mechanics, Vol. 197, Ocak 2018, ISSN: 0013-7944
LALE EROL, REZAKHANİ ROOZBEH, ALNAGGAR MOHAMMED, CUSATİS GİANLUCA
|
Isogeometric Implementation of High-Order Microplane Model for the Simulation of High-Order Elasticity, Softening, and Localization
Journal of Applied Mechanics, Vol. 84, No. 1, Ocak 2017, s. 11005, ISSN: 0021-8936
LALE EROL,ZHOU XİNWEİ,CUSATİS GİANLUCA
|
Non linear analysis of steel fibre reinforced concrete filled steel tube columns
Proceedings of the Institution of Civil Engineers - Structures and Buildings, Vol. 166, No. 6, Haziran 2013, s. 298-306, ISSN: 0965-0911
GÜLER SONER,LALE EROL,AYDOĞAN METİN
|
Physico Mechanical Property Tests Towards Performance Prediction of Chain Saw Machines
The Fifth Thailand Symposium on Rock Mechanics- Thairock 2015, Bangkok/TAYLAND, Vol. 381, No. 387, 22 Ocak 2015
TUMAÇ DENİZ,AVUNDUK EMRE,BAŞYİĞİT MİKAİL,ÇOPUR HANİFİ,BALCI CEMAL,SELMAN ER
|
Determining the Dominant Rock Properties Affecting the Impact Hammer Performance
(EUROCK 2016, Rock Mechanics & Rock Engineering: From the Past to the Future, Vol. 2, 29 Ağustos 2016, s. 907-912
HOJJATİ SHAHABEDDİN,TUMAÇ DENİZ
|
Cutting Performance of Chain Saw and Diamond Wire Machines in Beige Marble Quarry
8th Asian Rock Mechanics Symposium-ARMS8, s. 6
AVUNDUK EMRE,TUMAÇ DENİZ,BAŞYİĞİT MİKAİL,ER SELMAN,ÇOPUR HANİFİ,BALCI CEMAL
|
Predicting Cutting Performance of Chisel Tools by Using Physical and Mechanical Properties of Natural Stones
European Rock Mechanics Symposium (EUROCK 2012, ISRM International Symposium), 28 Mayıs 2012
ÇOPUR HANİFİ,BALCI CEMAL,BİLGİN NUH,TUMAÇ DENİZ,AVUNDUK EMRE
|
Buckling Analysis of Inclined Beam Column Structures by Using Differential Transform Method DTM
Applied Mechanics and Materials, Vol. 390, Ağustos 2013, s. 251-255, ISSN: 1662-7482
OZKAN AYSE,OZKOL İBRAHİM
|
Full Scale Linear Cutting Experiments with a Conical Cutter for Simulating Different Cutting Patterns
EUROCK 2016, Rock Mechanics & Rock Engineering: From the Past to the Future, Vol. 1, 29 Ağustos 2016, s. 153-158
ÇOPUR HANİFİ,BİLGİN NUH,BALCI CEMAL,TUMAÇ DENİZ,AVUNDUK EMRE,SHATERPOUR MAMAGHANİ AYDIN
|
Determining the Effects of Physical, Mechanical and Textural Properties of Metamorphic Stones on a Chisel Tool Performance
10th Asian Rock Mechanics Symposium-ARMS10, 1 Temmuz 2018, ISSN: 978-981-11-9003-2
TUMAÇ DENİZ,ÇOPUR HANİFİ,BALCI CEMAL,ER SELMAN,AVUNDUK EMRE
|