In Situ Production and Mechanical Properties of Aluminum Matrix Aluminum Copper Intermetallic Composite
International Conference on Material Science and Technology, 6 Nisan 2016
MAFOUZ DİALLO IBRAHİMA,PAKSOY AHMET HİLMİ,TAZEGÜL ONUR,MUHAFFEL FAİZ,ÇİMENOĞLU HÜSEYİN
|
Full factorial experimental design for mechanical properties of electrospun vascular grafts
Journal of Industrial Textiles, Vol. 47, No. 6, Şubat 2018, s. 1378-1391, ISSN: 1528-0837
YALÇIN ENİŞ İPEK,SEZGİN HANDE,GÖK SADIKOĞLU ÜMMÜHAN TELEM
|
Influence of Austempering Temperature on Microstructural and Mechanical Properties of EN GJS 500 7 and EN GJS 600 3 grades nodular cast irons
5. Isıl İşlem Sempozyumu, 2 Haziran 2016
GİDER GİZEM,YÜREKTÜRK YAKUP,PAKSOY AHMET HİLMİ,MUHAFFEL FAİZ,BAYDOĞAN MURAT
|
Understanding the polymer type and CNT orientation effect on the dynamic mechanical properties of high volume fraction CNT polymer nanocomposites
Composite Structures, Vol. 155, Kasım 2016, s. 255-262, ISSN: 02638223
ÜRK DENİZ,DEMİR ELİF,BULUT OSMAN,ÇAKIROĞLU DİLEK,CEBECİ FEVZİ ÇAKMAK,ÖVEÇOĞLU MUSTAFA LUTFİ,CEBECİ HÜLYA,DEMİR ELİF
|
Wear and Corrosion Resistances of Oxide Coatings formed on Magnesium Alloys by Micro Arc Oxidation
3rd International Conference on Mechanical Properties of Materials, 14 Aralık 2016
TEKİN MUSTAFA,TAŞLIÇAY CENGİZHAN,MUHAFFEL FAİZ,ÇİMENOĞLU HÜSEYİN
|
The Effect of Dispersion Preparation Type and Last Coagulation Bath on Graphene Oxide FibersProduced by Wet Spinning Technique
Tekstil ve Konfeksiyon, Vol. 25, No. 3, 2015, s. 215-219, ISSN: 1300-3356
UÇAR NURAY,GÖKÇELİ GÖKÇEN,YAVUZ NİLGÜN,ÖNEN HACER AYŞEN
|
Effect of ionomer/multiplet formation on mechanical properties and ascorbic acid release behavior of PNIPAAm hydrogels copolymerized by DMAEMA, DMAPMAAm and MAPTAC
Iranian Polymer Journal, Vol. 28, Ekim 2019, s. 977-990, ISSN: 1026-1265
ŞİMŞEK CEYDA,EROĞLU ZEYNEP EZGİ,ERBİL CANDAN
|
The effect of molecular organizations of PMMA-PPP and PS-PPP block copolymers on the morphology and on the optical, electronic and mechanical properties
Fen Bilimleri Enstitüsü, İstanbul Teknik Üniversitesi, 2009
GÜNEŞ KARAŞ
|
Synergistic effect of nanoparticles in three-dimensional network of carbon-based quantum dots on mechanical properties of polyurethane hybrid nanocomposite foams
Lisansüstü Eğitim Enstitüsü, İstanbul Teknik Üniversitesi, 2021
MAKBULE IRMAK PEKER
|
EVALUATING THE EFFICACY OF POLYETHYLENE GLYCOL AND MAGNESIUM CHLORIDE AS ANTI-FREEZE AGENTS ON THE MECHANICAL PROPERTIES OF CLAYS SUBJECTED TO FREEZE-THAW CYCLES
Lisansüstü Eğitim Enstitüsü, İstanbul Teknik Üniversitesi, 2024
AMIN YEGANEH RIKHTEHGAR
|
Comparative Investigation of The Effects of Carbon Nanotubes of Different Diameter and Length on Thermal and Mechanical Properties in PMMA Nanocomposite Reinforced With MWCNT
Lisansüstü Eğitim Enstitüsü, İstanbul Teknik Üniversitesi, 2023
MELTEM UZUNOĞLU
|
Improving the mechanical properties of layered composites under out-of plane loading by means of adding nanofibers produced with novel solution blowing technique
Fen Bilimleri Enstitüsü, Marmara Üniversitesi, 2021
YUSUF POLAT
|
Investigation of the structural and mechanical properties of the single crystal CMSX-4 SLS superalloy exposed to high temperature for long term
Lisansüstü Eğitim Enstitüsü, İstanbul Teknik Üniversitesi, 2021
SERTAÇ ALPTEKİN
|
INFLUENCE OF POLYMER TYPE AND BLENDING ON MECHANICAL PROPERTIES OF
COAXIAL ELECTROSPUN VASCULAR GRAFTS
15th International Conference on Nanomaterials (NANOCON 2023), Brno/ÇEK CUMHURİYETİ, 18 Ekim 2023
ÖZDEMİR SUZAN, ÖZTEMUR JANSET, SEZGİN HANDE, YALÇIN ENİŞ İPEK
|
INFLUENCE OF POLYMER TYPE AND BLENDING ON MECHANICAL PROPERTIES OF
COAXIAL ELECTROSPUN VASCULAR GRAFTS
15th International Conference on Nanomaterials (NANOCON 2023), Brno/ÇEK CUMHURİYETİ, 18 Ekim 2023
ÖZDEMİR SUZAN, ÖZTEMUR JANSET, SEZGİN HANDE, YALÇIN ENİŞ İPEK
|
How to Determine the Mechanical Properties of Laminated
Composite Plates?
2nd International Congress on Ship and Marine Technology, İstanbul/TÜRKİYE, 16 Eylül 2021
İRTEGÜN LİNA, TÜRKMEN HALİT SÜLEYMAN, BAYER İSMAİL
|