Densification and mechanical properties of Al2O3 ZrO2 CeO2 ceramics prepared by spark plasma sintering
ICC 3-3rd International Congress on Ceramics, Osaka/JAPONYA, 14 Kasım 2010
YILMAZ ELİF,ORMANCI ÖZDEN,AKIN İPEK,ŞAHİN FİLİZ,YÜCEL ONURALP,GÖLLER GÜLTEKİN
|
Effect of CeO2 addition on the mechanical properties of Al2O3 ZrO2 ceramics prepared by spark plasma sintering
CIMTEC 2010-12th International Ceramics Congress, Tuscany/İTALYA, 6 Haziran 2010, s. 29-30
YILMAZ ELİF,ORMANCI ÖZDEN,AKIN İPEK,ŞAHİN FİLİZ,YÜCEL ONURALP,GÖLLER GÜLTEKİN
|
Effect of Film Thickness on Structural and Mechanical Properties of Zn0.95Cu0.05O Thin Films
International Conference on Condensed Matter and Materials Science ICCMMS-2019, Adana/TÜRKİYE, 14 Ekim 2019, s. 70
TOPCU İSMAİL,TOSUN MURAT,BAYTAK TUĞBA,BULUT OSMAN,İPEK CENGİZ,ARDA LÜTFİ,ATAOĞLU ŞENOL
|
Investigation of Controlled Alignment Effect on the Mechanical Properties of Polymer Nanocomposites with Dynamic Mechanical Analysis
International Conference on Advances in Composite Materials and Structures CACMS 2015, İstanbul/TÜRKİYE, 13 Nisan 2015
DENİZ KAVRAR,DEMİR ELİF,BULUT OSMAN,CEBECİ HÜLYA
|
Swelling and mechanical properties of T-/pH-sensitive poly(NIPAAm-DMAPMAAm) and poly(NIPAAm-DMAPMAAm-AMPS) hydrogels
International Porous And Powder Materials Symposium Exhibition, İzmir/TÜRKİYE, 15 Eylül 2015
ERBİL CANDAN,ŞİMŞEK CEYDA
|
Swelling and mechanical properties of T-/pH-sensitive poly(NIPAAm-DMAPMAAm) and poly(NIPAAm-DMAPMAAm-AMPS) hydrogels
International Porous And Powder Materials Symposium Exhibition, İzmir/TÜRKİYE, 15 Eylül 2015
ŞİMŞEK CEYDA,ERBİL CANDAN
|
Experimental and MD simulation study on the physical and mechanical properties of organically modified montmorillonite clay and compatibilized linear low density polyethylene nanocomposites
Journal of Applied Polymer Science, Vol. 135, No. 6, Şubat 2018, s. 45817-45828, ISSN: 0021-8995
YİLDİRİM EROL,YURTSEVER MİNE,ERİMAN BÜLENT,UYANİK NURSELİ
|
The Effect of Manganese Sulfide Inclusions and Zirconium Additions on the Mechanical Properties of Heavy Section Cast Steel
International Journal of Metalcasting, Vol. 12, No. 2, Nisan 2018, s. 383-395, ISSN: 1939-5981
AYDIN ERSEL, ARISOY CEVAT FAHİR, ŞEŞEN MUSTAFA KELAMİ
|
Influence of Boronizing on Mechanical Properties of EN-C35E Steel
Key Engineering Materials, Vol. 2, Mayıs 2004, s. 629-632, ISSN: 1662-9795
YAPAR UMUT,BAŞMAN GÖKHAN,ARISOY CEVAT FAHİR,YEŞİLÇUBUK ALPER,ŞEŞEN MUSTAFA KELAMİ
|
The Effect of Decatizing on The Mechanical Properties and Handle of Wool Fabrics
CIRAT 4, Monastir/TUNUS, 2 Aralık 2010, s. 184-187
KALAOĞLU FATMA,SARIÇAM CANAN,KURŞUN BAHADIR SENEM,ERYÜRÜK SELİN HANİFE,JEVSNİK SİMONA
|
Design and Mechanical-Physical Properties of Epoxy-Rubber Based Composites Reinforced with Nanoparticles
Procedia Engineering, Vol. 184, Ocak 2017, s. 486-496, ISSN: 1877-7058
İREZ ALAEDDİN BURAK,BAYRAKTAR EMİN,MİSKİOGLU İBRAHİM
|
Flexural fatigue damage analyses of recycled rubber-modified epoxy-based composites reinforced with alumina fibres
FATIGUE FRACTURE OF ENGINEERING MATERIALS STRUCTURES, Vol. 42, No. 4, Nisan 2019, s. 959-971, ISSN: 8756-758X
İREZ ALAEDDİN BURAK,MİSKİOGLU İBRAHİM,BAYRAKTAR EMİN
|
Effect of ionomer/multiplet formation on mechanical properties and ascorbic acid release behavior of PNIPAAm hydrogels copolymerized by DMAEMA, DMAPMAAm and MAPTAC
Iranian Polymer Journal, Vol. 28, Ekim 2019, s. 977-990, ISSN: 1026-1265
ŞİMŞEK CEYDA,EROĞLU ZEYNEP EZGİ,ERBİL CANDAN
|
Effect of ionomer//multiplet formation on mechanical properties and ascorbic acid release behavious of PNIPAAm hydrogels copolymerized by DMAEMA DMAPMAAm and MAPTAC
IRANIAN POLYMER JOURNAL, Vol. 28, Ekim 2019, s. 977-990, ISSN: 1026-1265
ŞİMŞEK CEYDA,EROĞLU ZEYNEP EZGİ,ERBİL CANDAN
|
Effect of sodium hydroxide solution as polymerization solvent and activator on structural, mechanical and antibacterial properties of PNIPAAm and P(NIPAAm–clay) hydrogels
POLYMER COMPOSITES, Vol. 39, No. S1, Nisan 2018, s. 386-406, ISSN: 0272-8397
YALÇIN BESTENUR,ERBİL CANDAN
|
Effects of TEMED and EDTA on the Structural and Mechanical Properties of NIPAAm/NaMMT Composite Hydrogels
OURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS, Vol. 48, 2010, s. 1256-1264
YUMAKGİL KÜBRA,GÖKÇEÖREN ARGUN TALAT,ERBİL CANDAN
|
Effect of Mechanical Alloying Duration and Reinforcement Content on the Microstructural Properties of Al-12.6Si wt. -x(NbB2, VB) Composite Powders
1st International Symposium on Light Alloys and Composite Materials (ISLAC’18), 22 Mart 2018
TEKOĞLU EMRE,MERTDİNÇ SIDDIKA,AĞAOĞULLARI DUYGU,ÖVEÇOĞLU MUSTAFA LUTFİ
|
EFFECT OF SEQUENTIAL MILLING (MECHANICAL ALLOYING-CRYOGENICMILLING) ON THE MICROSTRUCTURAL AND MECHANICAL PROPERTIES OF TIB2REINFORCED AL-12.6 WT. SI MMCS
BRAMAT 2017, Brasov/ROMANYA, 7 Mart 2017, s. 119
TEKOĞLU EMRE,MERTDİNÇ SIDDIKA,AĞAOĞULLARI DUYGU,ÖVEÇOĞLU MUSTAFA LUTFİ
|
Effect of NbB2 Addition on the Microstructure and Mechanical Properties of Mechanically Alloyed Al 12 6Si Alloys
MMME 2016 (•3rd International Conference on Mining, Material and Metallurgical Engineering ), BUDAPEŞTE/MACARİSTAN, 22 Ağustos 2016
TEKOĞLU EMRE,MERTDİNÇ SIDDIKA,GÖKÇE HASAN,AĞAOĞULLARI DUYGU,ÖVEÇOĞLU MUSTAFA LUTFİ
|
CHARACTERIZATION INVESTIGATIONS OF MICROSTUCTURAL and MECHANICAL PROPERTIES OFAl15Si2 5Cu0 5Mg xCeO2 x 0 5 wt to 5 wt COMPOSITES via MECHANICAL ALLOYING andPRESSURELESS SINTERING
IMSP'16 (16th International Materials Symposium), 12 Ekim 2016
TEKOĞLU EMRE,MERTDİNÇ SIDDIKA,İMER CEREN,GÖKÇE HASAN,ÖVEÇOĞLU MUSTAFA LUTFİ
|