Hysteretic Behavior of Aluminum Alloy Core Buckling Restrained Braces (BRBs) with Various Material and System Properties
The 8th International Symposium on Steel Structures, JEJU/GÜNEY KORE, 5 Kasım 2015, s. 59-60
AVCI KARATAŞ ÇİĞDEM, ÇELİK OĞUZ CEM
|
YÜKSEK HASSASİYETLİ BURKULMASI ÖNLENMİŞ ÇAPRAZIN(BÖÇ) GELİŞTİRİLMESİ VE DENEYSEL İNCELENMESİ
9. Yapı Mekaniği Laboratuvarları Çalıştayı 18-19 Ekim 2024, Düzce Üniversitesi, Düzce, 18 Ekim 2024
GÜNTEPE SİNEM,KOZ OĞUZ,ÖNAL TOLGA,ARAKAWA GEN,AHMADULLAH NASİRİ,ÇELİK OĞUZ CEM
|
Experimental Study on Fire Behavior ofSteel–Concrete Composite Cellular Beamswith Large Opening Ratio
International Journal of Steel Structures, Vol. 20, No. 1, Ocak 2020, s. 207-231, ISSN: 1598-2351
SUNAR BÜKÜLMEZ PINAR,ÇELİK OĞUZ CEM
|
Cyclic Loading Tests of Sub standard RC Frames Retrofitted with Buckling Restrained Braces and Elastic Steel Frames Part 2
Architectural Institute of Japan(AIJ) Annual Conference 2016, FUKUOKA/JAPONYA, 24 Ağustos 2016
FUJISHITA KAZUHIRO,BAL AHMET,SÜTCÜ FATİH,MATSUI RYOTA,TERASHIMA MASAO,ÇELİK OĞUZ CEM,TAKEUCHI TORU
|
Heat transfer in porous media of steel balls under oscillating flow
Experimental Thermal and Fluid Science, Vol. 42, Ekim 2012, s. 79-92, ISSN: 08941777
PAMUK MEHMET TURGAY,ÖZDEMİR MUSTAFA
|
Experimental study on laminar air flow through spiral channel packed with steel balls
Heat and Mass Transfer, Vol. 57, Şubat 2021, s. 1453-1465, ISSN: 0947-7411
GÖKASLAN MUSTAFA YASİN, ÖZDEMİR MUSTAFA, KUDDUSİ LÜTFULLAH
|
Thermally Powered Soft Gripper Covered with Silver‐Coated Nylon Fabric Heater Reinforced with Stainless Steel Yarn
Advanced Engineering Materials, Vol. 26, Haziran 2024, ISSN: 1438-1656
TAHERKHANİ BAHMAN,ÇELEBİ MEHMET FATİH,ÇETİN MÜNİRE SİBEL,TUNÇAY ATALAY ASLI,İNCE GÖKHAN,ATALAY ÖZGÜR
|
Scalability of OpenFOAM for Simulations of a NovelElectromagnetic Stirrer for Steel Casting
The 22nd International Conference on Parallel and Distributed Processing Techniques and Applications, PDPTA'16, Las Vegas/AMERİKA BİRLEŞİK DEVLETLERİ, 25 Temmuz 2016
HUNDUR YAKUP,MAZZA ISABELLA,DURAN AHMET,PERSİ CRİSTİANO,SANTORO ANDREA,TUNÇEL MEHMET
|
Site investigation of damages occurred in a steel space truss roof structure due to ponding
Engineering Failure Analysis, Vol. 36, Ocak 2014, s. 301-313, ISSN: 1350-6307
PİROĞLU ELİŞAN FİLİZ, ÖZAKGÜL KADİR, İSKENDER HİKMET, TRABZON LEVENT, KAHYA CEYHAN
|
An Experimental Study to Understand the Localized Corrosion and Environment-Assisted Cracking Behavior of AISI 420-Martensitic Stainless Steel
School of Engineering Sciences in Chemistry, Biotechnology and Health (CBH), Chemistry, Royal Institute of Technology, 2018
KRİSHNAN ANANTHA HARARİMABADRAN
|
Experimental and finite element analysis of residual stresses in cold tube drawing with a fixed mandrel for AISI 1010 steel
Fen Bilimleri Enstitüsü, Yıldırım Beyazıt Üniversitesi, 2017
JABBAR KASIM JABBAR GATTMAH
|
A decision model for customer order prioritization and facility layout design, a case study for structural steel production in construction industry
Fen Bilimleri Enstitüsü, İstanbul Teknik Üniversitesi, 2018
BURCU NALBANTOĞLU
|
Enhancing antibacterial and anticorrosive properties of 316L stainless steel
with nanocoating of copper oxide nanoparticles
Materials Chemistry and Physics, Vol. 308, Temmuz 2023, ISSN: 0254-0584
KARABULUT GİZEM, BEKÖZ ÜLLEN NURAY, KARAKUŞ SELCAN, TORUNTAY CEYHUN
|
The effect of clay additives on pH variation in electric arc furnace
steel slag
3rd International Civil Engineering and Architecture Congress (ICEARC’23), 12 Ekim 2023
KORKMAZ BİLAL, YALÇIN DAYIOĞLU ASLI
|
Pullout Performance of Retrofit Adhesive Anchors in Low Strength Concrete.
2nd International Symposium In Connections between Steel and Concrete, Stuttgart/ALMANYA, 4 Eylül 2007, s. 373
BÜYÜKKAYIKCI TUBA, İLKİ ALPER
|
The effect of clay additives on pH variation in electric arc furnace
steel slag
3rd International Civil Engineering and Architecture Congress (ICEARC’23), 12 Ekim 2023
KORKMAZ BİLAL, YALÇIN DAYIOĞLU ASLI
|