Modeling and numerical analysls of the wire strand
Journal of Naval Science and Engineering, 2009
İMRAK CEVAT ERDEM,ERDÖNMEZ CENGİZ
|
Imaging of Pulmonary Edema with Microwaves - Preliminary Investigation
10th International Conference on Electrical and Electronics Engineering (ELECO), 30 Kasım 2017
DOĞU SEMİH,DİLMAN İSMAİL,ÇAYÖREN MEHMET,AKDUMAN İBRAHİM
|
”CONCEALED” ROOF DRAINAGE in CURVILINEAR LARGE SPAN ROOFS
International Civil Engineering and Architecture Conference 2019, 17 Nisan 2019
ADALIOĞLU SEREN,YAZICIOĞLU FATİH
|
Experimental Research on Header End - Plate Connections
International Conferences on Science and Technology Engineering Science and Technology, 26 Ağustos 2019
KARASU ADEM,VATANSEVER CÜNEYT,ALÇİÇEK HALUK EMRE
|
A New Criterion for Road Lighting Average Visibility Level Uniformity
Journal of Engineering & Environmental Sciences, 2003
GÜLER ÖNDER,ONAYGİL SERMİN
|
Uses and Gratifications of LinkedIn An Explotary Study
The World Congress on Engineering 2014, Vol. 2, 2 Temmuz 2014
BAŞAK ECEM,ÇALIŞIR FETHİ
|
Spray dried hydroxyapatite polyvinyl alcohol biocomposites
Journal of Polymer Engineering, Vol. 36, No. 8, Ekim 2016, ISSN: 2191-0340
BAŞARGAN TUĞBA,ERDÖL AYDIN NALAN,SAYGILI GÜLHAYAT
|
IMPROVEMENT OF HEAT DISTRIBUTION IN DAF-30 TYPE BUSHINGS
International Symposium on High Voltage Engineering (ISH2013), seul/GÜNEY KORE, 25 Ağustos 2013
ERDEN İLİM,ÖZDEMİR AYDOĞAN,İLHAN SUAT
|
Seismic Protection of High Voltage Bushings by Using Polyurethane Springs Paper No=2381
16th World Conferenceon Earthquake Engineering, 9 Ocak 2017
GÖKÇE TANSU,ORAKDÖĞEN ENGİN,YÜKSEL ERCAN
|
Determination of the Characteristics of a New Prestressed Lead Extrusion Damper
16th World Conference on Earthquake Engineering, Santiago/ŞİLİ, 9 Ocak 2017
SOYDAN CİHAN,YÜKSEL ERCAN,İRTEM ERDAL
|
Significance of roll damping on the weather criteria
INTERNATIONAL JOURNAL OF MARITIME ENGINEERING, No. 150, 2008, s. 1
ÜÇER ERDEM
|
Numerical Investigation of Thin Steel Plate Shear Walls
ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering, 13 Haziran 2007
VATANSEVER CÜNEYT,YARDIMCI NESRİN
|
Three Dimensional Lubrication Theory in Viscoelastic Shotr Bearing
Presentation, Seminar series held in the Mechanical Engineering Department at Indiana University, Purdue University, Indianapolis
CELASUN ŞULE
|
Mechanical evaluation of textile waste filled epoxy composites
International Eurasian Conference on Science, Engineering and Technology (EurasianSciEnTech2018), Ankara/TÜRKİYE, 22 Kasım 2018
YALÇIN ENİŞ İPEK,SEZGİN HANDE
|
Kalman filter and neural network based icing a identification applied to A340 aircraft dynamics
AIRCRAFT ENGINEERING AND AEROSPACE TECHNOLOGY, Ocak 2005, ISSN: 0002-2667
AYKAN RAHMİ,HACIZADE CENGİZ,ÇALIŞKAN FİKRET
|
Review of Classification Systems for Facilities Management
13th INTERNATIONAL CONGRESS ON ADVANCES IN CIVIL ENGINEERING, 12 Eylül 2018
KULA BEHLÜL,ERGEN PEHLEVAN ESİN
|
Re-Thinking lighting system design based on visual comfort and energy performance
Journal of Construction Engineering, Management Innovation, Aralık 2019, ISSN: 2630-5771
KILIÇ ZEHRA AYBİKE,KÖKNEL YENER ALPİN
|
Effective lengths of irregular frame columns
First European Conference on Earthquake Engineering and Seismology, Geneva, Switzerland
ÖZMEN GÜNAY, GİRGİN KONURALP, ORAKDÖĞEN ENGİN
|
Modeling and ARX Identification of a Quadrotor MiniUAV
ELECO 2015, 9th International Conference on Electrical and Electronics Engineering, Bursa/TÜRKİYE, 26 Kasım 2015
KURAL AYHAN,SARIOĞLU ATAKAN
|
Deployment of n-strut Cylindrical Tensegrity Booms
JOURNAL OF STRUCTURAL ENGINEERING, Vol. 146, No. 11, Kasım 2020, ISSN: 0733-9445
YILDIZ KAAN,LESİEUTRE GEORGE A
|