Bicycle sharing system design with capacity allocations
TRANSPORTATION RESEARCH PART B-METHODOLOGICAL, Vol. 114, No. null, 2018, s. 86-98, ISSN: 0191-2615
ÇELEBİ DİLAY,YORUSUN ASLİ,ISİK HANİFE
|
Diphenylphenacyl sulfonium salt as dual photoinitiator for free radical and cationic polymerizations
JOURNAL OF POLYMER SCIENCE PART A-POLYMER CHEMISTRY, Vol. 56, No. 4, Şubat 2018, s. 451-457, ISSN: 0887-624X
KAYA KEREM,KREUTZER JOHANNES,YAĞCI YUSUF
|
Determination of sulfur in human hair using high resolution continuum source graphite furnace molecular absorption spectrometry and its correlation with total protein and albumin
Spectrochimica Acta Part B: Atomic Spectroscopy, Vol. 130, Nisan 2017, s. 17-20, ISSN: 05848547
ÖZBEK NİL, BAYSAL ASLI
|
A slurry sampling method for the determination of iron and zinc in baby food by flame atomic absorption spectrometry
Food Additives Contaminants: Part A, Vol. 29, No. 2, Şubat 2012, s. 208-216, ISSN: 1944-0049
ÖZBEK NİL, AKMAN SÜLEYMAN
|
Determination of lead in flour samples directly by solid sampling high resolution continuum source graphite furnace atomic absorption spectrometry
Spectrochimica Acta Part B: Atomic Spectroscopy, Vol. 140, Şubat 2018, s. 73-75, ISSN: 0584-8547
TINAS HANDE, ÖZBEK NİL, AKMAN SÜLEYMAN
|
Method development for the determination of fluorine in water samples via the molecular absorption of strontium monofluoride formed in an electrothermal atomizer
Spectrochimica Acta Part B: Atomic Spectroscopy, Vol. 69, Mart 2012, s. 32-37, ISSN: 0584-8547
ÖZBEK NİL, AKMAN SÜLEYMAN
|
The Superimposed Paleocene Miocene Tectonics of the middle part of the Nallihan Wedge NW Turkey
EGU General Assembly Conference, VİYANA/AVUSTURYA, Vol. 17, 20 Nisan 2015, s. 427
ŞAHİN MURAT,YALTIRAK CENK
|
Dynamic Filtration Properties of Fresh Water Sepiolite based Muds
Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, Vol. 36, No. 19, Ağustos 2014, s. 2079-2086, ISSN: 1556-7036
ALİ ETTEHADİ OSGOUEİ,ÖZYURTKAN MUSTAFA HAKAN,ALTUN GÜRŞAT
|
Recycled and devulcanized rubber modified epoxy-based composites reinforced with nano-magnetic iron oxide, Fe 3 O 4
Composites Part B: Engineering, Vol. 148, Eylül 2018, s. 1-13, ISSN: 1359-8368
İREZ ALAEDDİN BURAK,BAYRAKTAR EMİN,MİSKİOGLU İBRAHİM
|
Temperature-dependent changes in the hydrogen bonded hard segment network and microphase morphology in a model polyurethane: Experimental and simulation studies
Journal of Polymer Science Part B: Polymer Physics, Vol. 56, No. 2, Ocak 2018, s. 182-192, ISSN: 0887-6266
YİLDİRİM EROL,YURTSEVER MİNE,YILGÖR EMEL,YILGÖR İSKENDER,WİLKES GARTH L
|
Cold plasma and microwave radiation applications for surface modification on the pistachio husk-based adsorbent and its effects on the adsorption of rhodamine B
Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, Vol. 38, No. 3, Şubat 2016, s. 339-346, ISSN: 1556-7036
SAKA CAFER,ŞAHİN ÖMER,KUTLUAY SİNAN
|
Characterizing polymers with heterogeneous micro- and macrostructures
Journal of Polymer Science Part B: Polymer Physics, Vol. 53, No. 6, Mart 2015, s. 409-414, ISSN: 08876266
GURARSLAN RANA,GÜRARSLAN ALPER,TONELLI ALAN E
|
Polymers coalesced from their cyclodextrin inclusion complexes: What can they tell us about the morphology of melt-crystallized polymers?
Journal of Polymer Science Part B: Polymer Physics, Vol. 50, No. 12, Haziran 2012, s. 813-823, ISSN: 08876266
GÜRARSLAN ALPER,JOİJODE ABHAY,TONELLI ALAN E
|
A Critical Review on the Use of the Scenario Technique for Experimental Design: Challenges and Lessons Learned Sage Researh Methods Cases Part 2
Londra/İNGİLTERE, 2019, s. 1-15, Sage Publications
ALTINİĞNE EKİCİ NEŞENUR, KARAOSMANOĞLU ELİF, IŞIKSAL DİDEM GAMZE
|
Thermal Stress Analysis for Functionally Graded Plates with Modulus Gradation, Part II
Experimental Mechanics, Vol. 64, Haziran 2024, ISSN: 0014-4851
BAYTAK TUĞBA,TOSUN MURAT,İPEK CENGİZ,MOLLAMAHMUTOĞLU ÇAĞRI,BULUT OSMAN
|
Hardness, friction and wear characteristics of 3D-printed PLA polymer
Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, Ocak 2021, ISSN: 1350-6501
ZHIANI HERVAN SAHAR, ALTINKAYNAK ATAKAN, PARLAR ZEYNEP
|
State Observation for Elastoplastic Friction Models in Positioning Systems by Utilizing Leunberger Observers
Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, Vol. 220, No. 5, Ağustos 2006, s. 417-426, ISSN: 0959-6518
TEMELTAŞ HAKAN,AKTAS GURCAN
|
Geochemistry and geochronology of late Mesozoic volcanic rocks in the northern part of the Eastern Pontide Orogenic Belt NE Turkey Implications for the closure of the Neo Tethys Ocean
Lithos, Vol. 248, Nisan 2016, s. 240-256, ISSN: 0009-2819
ÖZDAMAR ŞENEL
|
Fabrication and characterization of electrospun biopolyester/gelatin nanofibers
Journal of Biomedical Materials Research Part B: Applied Biomaterials, Vol. 109, No. 10, Ekim 2021, s. 1478-1487, ISSN: 1552-4973
ÜLKER TURAN CANSU, GÜVENİLİR FATOŞ YÜKSEL
|
Lipase catalyzed synthesis of bio-based polyamide 5.6: an alternative route
Journal of Macromolecular Science, Part A, Vol. 61, No. 1, Ocak 2024, s. 69-78, ISSN: 1060-1325
GÜVENİLİR FATOŞ YÜKSEL, GÜLEL ŞEBNEM
|