Stress analysis of a Wankel engine eccentric shaft under varied thermal conditions
Materials Testing, Vol. 61, No. 12, Aralık 2019, s. 1157-1164, ISSN: 0025-5300
CİHAN ÖMER,BULUT MEHMET,KUTLAR OSMAN AKIN
|
Analysis of wall shear stress on the outside in type hollow fiber membrane modules by CFD simulation
DESALINATION, Ekim 2014, ISSN: 0011-9164
KAYA RECEP,TÜRKEN TÜRKER,ŞENGÜR TAŞDEMİR REYHAN,GÜÇLÜ SERKAN,İMER DERYA YÜKSEL,KOYUNCU İSMAİL
|
The Analysis Of A Thermal Stress State For Industrial Composite Plates
21 st International Research/Expert Conference ”Trends in the Development of Machinery and Associated Technology” TMT2018, 18 Eylül 2018
BAYTAK TUĞBA,BULUT OSMAN
|
Stress analysis of twisted MgB2 cable
4th Internatıonal conference on materials science and nanotechnology for next generation (MSNG2017), 28 Haziran 2017
TOSUN MURAT,İPEK CENGİZ,DÖNMEZ ABDULLAH,BULUT OSMAN,BAYTAK TUĞBA,ATAOĞLU ŞENOL,ARDA LÜTFİ
|
STRESS ANALYSIS AND MICROSTRUCTURE OF THE AL2O3/Cu/MgB2 WIRES
20th International Research/Expert Conference”Trends in the Development of Machinery and Associated Technology” TMT2016, 24 Eylül 2016
ATAOĞLU ŞENOL,TOSUN MURAT,BAYTAK TUĞBA,DÖNMEZ ABDULLAH,BULUT OSMAN,İPEK CENGİZ
|
THE ANALYSIS OF A THERMAL STRESS STATE FOR INDUSTRIALCOMPOSITE PLATES
Journal of Trends in the Development of Machineryand Associated Technology, Vol. 21, No. 1, Eylül 2018, s. 113-116, ISSN: 2303-4009
BAYTAK TUĞBA,BULUT OSMAN
|
Thermal stress analysis around a cavity on a bimetal
STRUCTURAL ENGINEERING AND MECHANICS, Vol. 69, No. 1, Ocak 2019, s. 69-75, ISSN: 1225-4568
BAYTAK TUĞBA,BULUT OSMAN
|
Stress Analysis and Microstructure of the Al2O3/Cu/MgB2 wires
Journal of Trends in the Development of Machinery and Associated Technology, Vol. 20, No. 1, Ekim 2016, s. 57-60, ISSN: 2303-4009
ATAOĞLU ŞENOL,TOSUN MURAT,BAYTAK TUĞBA,DÖNMEZ ABDULLAH,BULUT OSMAN,İPEK CENGİZ
|
Preparation and Thermal Stress Analysis of Al_{2}O_{3} Insulation Coatings on SS-304 Tape
IEEE Transactions on Applied Superconductivity, Vol. 19, No. 3, Haziran 2009, s. 2375-2378, ISSN: 1051-8223
ATAOĞLU ŞENOL,ARDA LÜTFİ,KADIOĞLU NECLA,ÇAKIROĞLU ÖMER,BULUT OSMAN,GÜLLÜOĞLU ARİF NİHAT,BELENLİ İBRAHİM
|
Static Analysis of the Stress State Caused by Heating Quenching Process in Tempered Glasses
Journal of Trends in the Development of Machineryand Associated Technology, Vol. 21, No. 1, Eylül 2018, s. 121-124, ISSN: 2303-4009
DUMAN CUMA UMUR,SÖNMEZ MEHMET ŞEREF,BAYTAK TUĞBA,BULUT OSMAN
|
Genomic and transcriptomic analysis of a coniferyl aldehyde-resistant Saccharomyces cerevisiae strain obtained by evolutionary engineering
FEMS YEAST RESEARCH, Vol. 19, No. 3, Ocak 2019, ISSN: 1567-1356
HACISALİHOĞLU BURCU, ÇAKAR ZEYNEP PETEK, TOPALOĞLU ALİCAN
|
An experimental investigation into strain and stress partitioning of duplex stainless steel using digital image correlation, X-ray diffraction and scanning Kelvin probe force microscopy
The Journal of Strain Analysis for Engineering Design, Vol. 51, Ocak 2016, ISSN: 0309-3247
ÖRNEK CEM, ENGELBERG DİRK
|
Stress Analysis of Laminated HSDT Beams Considering Bending Extension Coupling
Teknik Dergi, Vol. 34, No. 1, Ocak 2023, s. 1-23, ISSN: 2822-6836
BAB YONCA, KUTLU AKİF
|
Time-dependent leaf proteome alterations of Brachypodium distachyon in response to drought stress
PLANT MOLECULAR BIOLOGY, Vol. 94, No. 6, Ağustos 2017, s. 609-623, ISSN: 0167-4412
TATLI ÖZGE,SOĞUTMAZ ÖZDEMİR BAHAR,DİNLER DOĞANAY GİZEM
|
Effect of attachment types and number of implants supporting mandibular overdentures on stress distribution A computed tomography based 3D finite element analysis
Journal of Biomechanics, Vol. 48, No. 1, Ocak 2015, s. 130-137, ISSN: 00219290
BİLHAN SELDA ARAT,CENGİZ BAYKASOGLU,BİLHAN HAKAN,OMER KUTAY,MUGAN ATA
|
Influence of different luting cement on the stress distribution in maxillary central incisor restored by composite laminate veneer A 3D finite element analysis
6th CONSEURO 2013 Paris Conference, 1 Ocak 2013
MM EREN, T YUCEL, E YILDIZ, E ICER, C BAYKASOGLU, A MUGAN
|
Thermal-stress analysis of ceramic laminate veneer restorations with different incisal preparations using micro-computed tomography-based 3D finite element models
Journal of the Mechanical Behavior of Biomedical Materials, Vol. 75, Kasım 2017, s. 302-313, ISSN: 17516161
CELEBİ ALPER TUNGA,ICER ESRA,EREN MELTEM MERT,BAYKASOĞLU CENGİZ,MUGAN ATA,YILDIZ ESRA
|
Numerical Static and Dynamic Stress Analysis on Railway Passenger and Freight Car Models
International Iron and Steel Symposium, 1 Ocak 2010
C BAYKASOGLU, E SUNBULOGLU, SE BOZDAG, F ARUK, T TOPRAKİ A MUGAN
|
An 8 node assumed stress hybrid element for analysis of shells
Computers & Structures, Vol. 84, No. 29-30, Kasım 2006, s. 1990-2000, ISSN: 00457949
DARILMAZ KUTLU
|
Analysis of sandwich plates A three dimensional assumed stress hybrid finite element
JOURNAL OF SANDWICH STRUCTURES & MATERIALS, Vol. 14, No. 4, Temmuz 2012, s. 487-501, ISSN: 1099-6362
DARILMAZ KUTLU
|