STUDY OF THE CUTTING TOOL CHIP INTERFACE BY THE USE OF THREE DIMENSIONAL ORTHOGONAL CUTTING SIMULATION
The 15th International Conference on Machine Design and Production, 19 Haziran 2012
YUNUS ÇİMENLİ, FATİH YALÇIN, NİHAT AKKUŞ
|
A Rooftop Antenna Tracking System: Design, Simulation, and Implementation
IEEE Antennas and Propagation Magazine, Vol. 51, No. 2, Nisan 2009, s. 214-224, ISSN: 1045-9243
YALÇIN YAPRAK,KURTULAN SALMAN
|
Plastic-Damage Modeling of Unreinforced Masonry Walls (URM) Subject to Lateral Loading
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING, Vol. 42, No. 9, 2017, s. 4201-4220, ISSN: 2193-567X
ALGOHİ BASHEER H.,BALUCH MOHAMMED H.,RAHMAN MUHAMMAD K.,AL-GADHİB ALİ H.,DEMİR CEM
|
Analysis of wall shear stress on the outside in type hollow fiber membrane modules by CFD simulation
DESALINATION, Ekim 2014, ISSN: 0011-9164
KAYA RECEP,GÖKHAN DEVECİ,TÜRKEN TÜRKER,ŞENGÜR TAŞDEMİR REYHAN,GÜÇLÜ SERKAN,İMER DERYA YÜKSEL,KOYUNCU İSMAİL
|
Determination of minimum required damping in stochastic following seas modeled by using Gaussian white noise
Communications in Nonlinear Science and Numerical Simulation, No. 12, 2012, s. 4870-4876, ISSN: 1007-5704
ÜÇER ERDEM, SÖYLEMEZ MUHİTTİN
|
Design and Simulation of a Low Power RF Front End for Short Range Outdoor Applications
International Journal of Mechatronics Electrical and Computer Technology (IJMEC), Vol. 15, No. 8, Aralık 2015, s. 2571-2576
AMİN HAMİD YADEGAR,PİRİ FARSHAD,GÜNEŞ ECE OLCAY
|
COMPUTER IMPLEMENTED METHOD FOR SEGMENTATION OF A SHIP HULL INTO A SMALL PLATES BY SPLIT-AND-PACK APPROACH
Patent No: 10-2049906, Patent Sınıfı: G06F17/5009 Computer-aided design using simulation, 2019
ERKAN GUNPİNAR
Erkan Günpınar
Patent
SECTION F - MECHANICAL ENGINEERING; LIGHTING; HEAT
|
İTÜ "Mathematical Methods in Fluid Dynamics and Simulation of Giant Oil and Gas Resevoirs" Konferansı Açılış Konseri
İTÜ Taşkışla Kampüsü 109 Numaralı Salon, 3 Eylül 2012
PROF.Ş.ŞEHVAR BEŞİROĞLU(DÜZENLEYEN), YRD.DOÇ.DR. SİNEM ÖZDEMİR(SOLİST), ÖĞR.GÖR.ALİ TÜFEKÇİ(NEY), DOÇ.DR. GÖZDE ÇOLAKOĞLU SARI(KEMENÇE), ÖĞR.GÖR.SERKAN HALİLİ(KANUN), ÖĞR.GÖR.BİLEN IŞIKDAŞ(UD), GÖZDE ÇOLAK(RİTM)
|
Hydrological simulation program-Fortran (HSPF) model as a decision support tool for a developing country-A case study from Turkey
Fen Bilimleri Enstitüsü, İstanbul Teknik Üniversitesi, 2009
MANSOOR AHMED BALOCH
|
A COMPARISON OF DIRECT VS. INDIRECT STABILIZATION ON BOTH SIMULATION AND IMPLEMENTATION BASIS AND A COMPLEMENTARY FILTER APPROACH FOR NON-STIFF MECHANICAL SYSTEMS
Fen Bilimleri Enstitüsü, İstanbul Teknik Üniversitesi, 2022
EMİN DENİZ
|
The computational study on the elucidation of the binding interactions and mechanism of anti-neoplastic purine derivative drugs with DNA: Molecular docking and md simulation studies
Lisansüstü Eğitim Enstitüsü, İstanbul Teknik Üniversitesi, 2022
SOYKAN AĞAR
|
Evaluation of the variable infiltration capacity (VIC) model for hydrological simulation using remote sensing observations in the western Black Sea basin
Lisansüstü Eğitim Enstitüsü, İstanbul Teknik Üniversitesi, 2023
MOTASEM E. A. ALFALOJI MOTASEM E. A. ALFALOJI
|
Simulation and life cycle assessment of combined bioheat and biopower plant using hungary oak (Quercus frainetto L.) coppices as a feedstock
Enerji Enstitüsü, İstanbul Teknik Üniversitesi, 2024
FAHRİYE ENDA TOLON
|
Application of hybrid simulation and improvement of decision tree algorithms for real-time transient stability prediction based on PMU measurements
Fen Bilimleri Enstitüsü, İstanbul Teknik Üniversitesi, 2020
TOHID BEHDADNIA
|
A 3d partial simulation of human artery and vein system using two-phase blood flow coupled with a thermal RBC aggregation model
Bilişim Enstitüsü, İstanbul Teknik Üniversitesi, 2020
ERKE ARIBAŞ
|
NUMERICAL SIMULATION OF NATURAL VENTILATION IN A
LIVING SPACE FOR DIFFERENT SPACE ORGANIZATION
CLIMAMED-13, Istanbul/TÜRKİYE, 3 Kasım 2013, s. 190-198
ÖĞÜŞ GÜVEN, ÇAKAN MURAT, MANİOĞLU GÜLTEN
|
A simulation approach for plastic gloves’ waste management during COVID-19 pandemic: A Case of Turkey
Ninth International Conference on Environmental Management, Engineering, Planning & Economics (CEMEPE), 5 Haziran 2022, s. 359-366
KONYALIOĞLU AZİZ KEMAL, BEREKETLİ ZAFEIRAKOPOULOS İLKE
|
Modelling, Simulation and Controller Design for Hydraulically Actuated
Ship Fin Stabilizer Systems
The 3rd International Conference on Control, Mechatronics and Automation, Bercelona, Spain, ICCMA 2015, Barcelona/İSPANYA, Vol. 42, No. 01003, 21 Aralık 2015, s. 1-6
ZİHNİOĞLU ALPER,ERTOGAN MELEK,TAYYAR GÖKHAN TANSEL,KARAKAŞ CEMAL ŞAFAK,ERTUĞRUL ŞENİZ
|
Numerical Simulation of Wave Forces Acting on Large Cylinders
4th International Naval Architecture and Maritime Symposium (INT-NAM 2023), İstanbul/TÜRKİYE, 11 Ekim 2023, s. 535-548
TUNÇAY RABİA YAĞMUR,BAYRAKTAR BURAL DENİZ
|
Evaluating the Thermal Performance and Carbon Emission of an
Aluminum Curtain Wall of a Residential Building
International Graduate Research Symposium - IGRS’2022, istanbul/TÜRKİYE, 1 Haziran 2022
KAMIŞ İSMAİL, SÖZER HATİCE
|