Effects of the stator design parameters on the torque performance of a PMaSynRM
2017 11TH IEEE INTERNATIONAL CONFERENCE ON COMPATIBILITY, POWER ELECTRONICS AND POWER ENGINEERING (CPE-POWERENG), No. null, 4 Nisan 2017, s. 346-351
TAP ALPER,XHELADİNİ LİRİDON,İMERYÜZ MURAT,YILMAZ MURAT,ERGENE LALE
|
Equivalent circuit parameter calculation of canned solid rotor induction motor using finite element method
ICEM 2004, 16th International Conference on Electrical Machines, Krakow/POLONYA, 5 Eylül 2004
ERGENE LALE,SALON SHEPPARD J
|
Performance analysis of piled raft foundations in comparison with conventional foundation systems by using finite element method
15th European Conference on Soil Mechanics and Geotechnical Engineering, Atina/YUNANİSTAN, 11 Eylül 2011, s. 811-816
YALÇIN DAYIOĞLU ASLI,İNCECİK MEHMET METE
|
Modelling of the Heat Transfer Measurement Unit for Cotton Plain Knitted Fabric Using Finite Element Method
TEXTILE RESEARCH JOURNAL, Vol. 78, 2008, s. 53-59, ISSN: 0040-5175
CİMİLLİ SENA,NERGİS FATMA BANU,CANDAN CEVZA
|
Free vibration analysis of helicoidal bars with thin walled circular tube cross section via mixed finite element method
Sigma Journal of Engineering and Natural Sciences, Vol. 33, No. 2, 2015, s. 200-218, ISSN: 1304-7191
ERATLI NİHAL,ERMİŞ MERVE,OMURTAG MEHMET HAKKI
|
Free vibration analysis of elastic cylindrical helix via a mixed finite element method
Int. J. of Civil and Structural Engineering-IJCSE, Vol. 2, No. 1, 2015, s. 323-326, ISSN: 2372-3971
ERATLI NİHAL,KUTLU AKİF
|
Dynamic behavior of the viscoelastic noncylindrical helices with a mixed finite element method
Int. J. of Structural Analysis and Design-IJSAD, Vol. 2, No. 1, 2015, s. 110-113, ISSN: 2372-4102
ERATLI NİHAL,KUTLU AKİF
|
Stress and Strain Analyses of Circular Knitting Needles by Using Finite Element Method
47th International Federation of Knitting Technologists Congress, 23 Ekim 2014
CANDAN CEVZA,DURU SENA,YESİM BECEREN
|
Simulation of the effect of segmented axial direction magnets on the efficiency of in-wheel permanent magnet brushless DC motors used in light electric vehicles based on finite element method
Electrical Engineering, Vol. 103, Mayıs 2021, s. 3111-3117, ISSN: 0948-7921","1432-0487
ÇABUK ALİ SİNAN
|
Effect of the Tap Winding Configurations on the Leakage Reactance of the Concentric Transformer Coils
2019 1st Global Power, Energy and Communication Conference (GPECOM), 12 Haziran 2019, s. 200
DAWOOD KAMRAN,KÖMÜRGÖZ KIRIŞ GÜVEN
|
Fatigue Life Analysis Of Wire Rope StrandsWith Finite Element Method
Key Engineering Materials, Vol. 572, Eylül 2013, s. 513-516, ISSN: 572513
GERDEMELİ İSMAİL,KURT HABİBOĞLU SERPİL,ALİ SEMİH ANIL
|
The Mixed Finite Element Method for the Dynamic Analysis of Viscoelastic Circular Beams
Fourth International Conference on Vibration Problems, Jadavpur/HİNDİSTAN, 27 Kasım 1999, s. 40-52
KADIOĞLU FETHİ,AKÖZ AHMET YALÇIN
|
Mixed finite element formulation by using Gateaux differantial method for free vibration analysis of angle-ply composite beams
International Symposium on Advances in Applied Mechanics and Modern Information Technology, AAMMIT11, Baku/AZERBAYCAN, 22 Eylül 2011, s. 218-222
MADENCİ EMRAH,ÖZÜTOK ATİLLA,KADIOĞLU FETHİ
|
The Mixed Finite Element Method For The Quasi Static Analysis Of Viscoelastic Plates Of Varying Thickness
Civil Construction Engineering and Technologies Conference, CONSTENG’15, İstanbul/TÜRKİYE, 4 Aralık 2015
TEKİN GÜLÇİN,KADIOĞLU FETHİ,AKÖZ AHMET YALÇIN
|
Mixed Finite Element Method for Analysis of Viscoelastic Plates
12th International Congress on Advances in Civil Engineering, ACE 2016, istanbul/TÜRKİYE, 21 Eylül 2016
TEKİN ÖZKAN GÜLÇİN,KADIOĞLU FETHİ
|
2D Back Analysis of Slopes of A Lignite Open Pit Using Finite Element Method (FEM): A Case Study
25th International Mining Congress and Exhibition of Turkey, ANTALYA/TÜRKİYE, 11 Nisan 2017, s. 73-80
SERTABİPOĞLU ZEYNEP,ÖZER ÜMİT,TUNÇDEMİR HAKAN
|
A mixed finite element formulation for timoshenko beam on winkler foundation
COMPUTATIONAL MECHANICS, Vol. 31, No. 3-4, 2003, s. 229-237, ISSN: 0178-7675
ERGÜVEN MUAMMER ERTAÇ,GEDİKLİ ABDULLAH
|
Analysis Of Synthetic Micro Jets Using CBS Finite Element Method On Moving Deforming Grids
International Symposium on Transient Convective Heat and Mass Transfer in Single and Two Phase Flows, Çeşme, Turkey, No. ., 17 Ağustos 2003
ÇELİK BAYRAM,EDİS FIRAT OĞUZ,MISIRLIOĞLU AYDIN
|
Large Deformation Object Modeling Using Finite Element Method and Proper Orthogonal Decomposition for Haptic Applications
SEECCM 2009 2nd South-East European Conference on Computational Mechanics, 1 Ocak 2009
Y PACA, A MUGAN, S YESİLYURT
|
Coupled axial-flexural-torsional vibration of Timoshenko frames
JOURNAL OF VIBRATION AND CONTROL, Vol. 20, No. 15, Kasım 2014, s. 2366-2377, ISSN: 1077-5463
YÜCEL ADİL, ARPACI MEHMET ALAİTTİN, TÜFEKCİ EKREM
|