Investigation of indentation and dry sliding wear behaviour of Al-12.6 wt. Si-10 wt. TiB2 composites produced by sequential milling and pressureless sintering
International Journal of Materials Research, Vol. 110, No. 11, Kasım 2019, s. 1047-1057, ISSN: 1862-5282
TEKOĞLU EMRE,YÜREKTÜRK YAKUP,AĞAOĞULLARI DUYGU,SHAIKD ASAD ALI DILAWARY,BAYDOĞAN MURAT,ÖVEÇOĞLU MUSTAFA LUTFİ
|
Effect of aluminizing and austempering processes on structural, mechanical and wear properties of a SSF ductile iron
Materials Research Express, Vol. 6, No. 1, Ocak 2019, s. 16550, ISSN: 2053-1591
YÜREKTÜRK YAKUP,BAYDOĞAN MURAT
|
Assembly Line Balancing in a Ready to Wear Company Producing Skirt
Tekstil ve Mühendis, İSTANBUL/TÜRKİYE, Vol. 21, No. 96, Aralık 2014, s. 20-26, ISSN: 13007599
ERYÜRÜK SELİN HANİFE,KALAOĞLU FATMA,BASKAK MURAT
|
Tribological Properties of Tetrahedral Amorphous Carbon Coating under Boundary Lubrication
5th International Conference on Manufacturing, Machine Design, and Tribology (ICMDT 2013), Busan/GÜNEY KORE, 22 Mayıs 2013, s. 264-266
TAŞDEMİR HACI ABDULLAH,WAKAYAMA MASAHARU,TOKOROYAMA TAKAYUKİ,KOUSAKA HİROYUKİ,UMEHARA NORİTSUGU,MABUCHİ YUTAKA,HİGUCHİ TSUYOSHİ
|
Use of Diamond Like Carbon DLC In Engine Components For Ultra Low Friction and Environmentally Friendly Lubrication
5th International Symposium on Advanced Plasma Science and its Applications for Nitrides and Nanomaterials, Nagoya/JAPONYA, 28 Şubat 2013, s. 91-91
TAŞDEMİR HACI ABDULLAH,TOKOROYAMA TAKAYUKİ,KOUSAKA HİROYUKİ,UMEHARA NORİTSUGU,MABUCHİ YUTAKA,HİGUCHİ TSUYOSHİ
|
EFFECT OF MATING MATERIAL ON FRICTION AND WEAR PROPERTIES OF a-C:H DLC IN BOUNDARY BASE OIL LUBRICATION
44th Leeds-Lyon Symposium on Tribology, Lyon/FRANSA, 4 Eylül 2017
ABOUA KOUAMİ AUXENCE MELARDOT,UMEHARA NORİTSUGU,KOUSAKA HİROYUKİ,TAŞDEMİR HACI ABDULLAH,MABUCHİ YUTAKA,HİGUCHİ TSUYOSHİ,KAWAGUCHİ MASAHİRO
|
ZnDTP Derived Tribofilm Characterization by 3D Scanning Electron Microscope Observation
6th International Conference on Manufacturing, Machine Design, and Tribology (ICMDT 2015), Okinawa/JAPONYA, 22 Nisan 2015, s. 314-315
MELARDOT ABOUA K A,XİNGRUİ DENG,TAŞDEMİR HACI ABDULLAH,KOUSAKA HİROYUKİ,UMEHARA NORİTSUGU,MABUCHİ YUTAKA,HİGUCHİ TSUYOSHİ,KAWAGUCHİ MASAHİRO
|
The development of friction tester in pressurized hot water at 30 MPa and 300
5th International Conference on Manufacturing, Machine Design, and Tribology (ICMDT 2013), Busan/GÜNEY KORE, 22 Mayıs 2013, s. 91-91
YAGİ YUJİ,TAŞDEMİR HACI ABDULLAH,TOKOROYAMA TAKAYUKİ,UMEHARA NORİTSUGU,INAYOSHİ NARUHİKO,SASAKİ KEİJİ
|
Room and High Temperature Sliding Wear Characteristics of Laser Surface Melted Stellite 6 and Mo-Alloyed Stellite 6 Hardfacings
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, No. 30, Ocak 2021, s. 302-311, ISSN: 1059-9495
ALHATTAB ALİ ABDUL MUNİM, DİLAWARY SHAİKH ALİ DİLAWARY, MOTALLEBZADEH AMİR, ARISOY CEVAT FAHİR, ÇİMENOĞLU HÜSEYİN
|
Effect of electron beam surface melting on the microstructure and wear behavior of Stellite 12 hardfacing
Industrial Lubrication and Tribology, Vol. 71, No. 5, Temmuz 2019, s. 636-641, ISSN: 0036-8792
ALHATTAB ALİ ABDUL MUNİM,DİLAWARY SHAİKH ASAD ALİ,MOTALLEBZDEH AMİR,ARISOY CEVAT FAHİR,ÇİMENOĞLU HÜSEYİN
|
Investigation of Wear Behaviors of Elevator Door RollersManufactured of MoS2 Reinforced Pa66 Material by Disk-on-Disk Tribometer
9th INTERNATIONAL CONFERENCE ON TRIBOLOGY (BalkanTRib 17), NEVŞEHİR/TÜRKİYE, 13 Eylül 2017, s. 240-247
ERDOĞDU YUSUF EREN,PALABIYIK İBRAHİM MEHMET,KENAN HAMİT
|
Effect of copper addition on the temperature dependent reciprocating wear behaviour of CrN coatings
Surface and Coatings Technology, Vol. 202, No. 4-7, Aralık 2007, s. 866-870, ISSN: 02578972
EZİRMİK KADRİ VEFA,SENEL ESMA,KAZMANLI MUHAMMET KÜRŞAT,ERDEMİR ALİ,ÜRGEN MUSTAFA KAMİL
|
Effect of Impact Angle on Erosive Abrasive Wear of Ductile and Brittle Materials
International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, Vol. 9, No. 9, Eylül 2015, s. 1582-1586, ISSN: 1307-6892
KOSA ERGİN,GÖKŞENLİ ALİ
|
Electroless Ni B W Coatings For Improving Hardness Wear And Corrosion Resistance
Materials and Technology, Vol. 47, No. 6, Kasım 2013, s. 803-806, ISSN: 1580-2949
AYDENİZ ALİ İMRE,GÖKŞENLİ ALİ,DİL GÖKÇE,MUHAFFEL FAİZ,ÇALLI ÇAĞDAŞ,YÜKSEL BEHİYE
|
Analysis and Optimization of Erosion Wear Tester Design Parameters
Applied Mechanics and Materials, Haziran 2015, s. 322-327, ISSN: 1662-7482
KOSA ERGİN,GÖKŞENLİ ALİ
|
Heat Treated and As Plated Electroless Duplex Ni P Ni B Coatings Evaluation of Hardness and Wear Resistance
Advanced Materials Research, Pfaffikon/İSVİÇRE, Vol. 853, Aralık 2013, s. 264-269, ISSN: 1662-8985
DİL GÖKÇE,GÖKŞENLİ ALİ,ÇALLI ÇAĞDAŞ,MUHAFFEL FAİZ,AYDENİZ ALİ İMRE,YILDIZ RAŞİD AHMED,YÜKSEL BEHİYE
|
EFFECT OF ANNEALING TEMPERATURE ON HARDNESS AND WEAR RESISTANCE OF Ni B Mo ELECTROLESS COATINGS
Surface Review and Letters, Vol. 22, No. 05, Haziran 2015, s. 1550058, ISSN: 0218-625X
SERİN İHSAN GÖKHAN,GÖKŞENLİ ALİ
|
Toughening mechanism in epoxy resin modified recycled rubber based composites reinforced with gamma-alumina, graphene and CNT
Annual Conference of the Society for Experimental Mechanics 2018, 4 Haziran 2018, s. 31, ISSN: 21915652 21915644
İREZ ALAEDDİN BURAK,BAYRAKTAR EMİN,MİSKİOGLU İBRAHİM
|
Damping and toughening effect of the reinforcements on the epoxy modified recycled devulcanized rubber based composites
Annual Conference of the Society for Experimental Mechanics 2018, Reno/AMERİKA BİRLEŞİK DEVLETLERİ, 4 Haziran 2018, s. 147, ISSN: 21915652 21915644
İREZ ALAEDDİN BURAK,BAYRAKTAR EMİN,MİSKİOGLU İBRAHİM
|
Mechanical Characterization of Epoxy: Scrap Rubber Based Composites Reinforced with Nanoparticles
Annual Conference of the Society for Experimental Mechanics 2017, Vol. 6, 12 Haziran 2017, s. 33, ISSN: 21915652 21915644
İREZ ALAEDDİN BURAK,MİSKİOGLU İBRAHİM,BAYRAKTAR EMİN
|