Examining the Impact of Groove Profiles and Dimensional Parameters on Shear Pin Strength
4th International Graduate Research Symposium, IGRS’25, 12 Mayıs 2025, s. 1443-1447
YİTİM MEHMET OZAN,İMRAK CEVAT ERDEM,CANDAŞ ADEM
|
Mechanical and thermal properties of glass/epoxy composites filled with silica aerogels
PLASTICS RUBBER AND COMPOSITES, Vol. 50, No. 8, Ekim 2021, ISSN: 1465-8011
BAYDOĞAN MURAT,ALTAY PELİN,SELVER ERDEM,ÖZTAŞ BURAK,UÇAR MEHMET,UÇAR NURAY,GEYGEL BERKAY
|
Effect of longitudinal reinforcement ratio on residual flexural capacity of high-strength reinforced concrete beams exposed to impact loading
Structures, Vol. 67, Eylül 2024, ISSN: 2352-0124
DOK GÖKHAN,ÇAĞLAR NACİ,İLKİ ALPER,YILMAZ CEMAL
|
Fault strength in Marmara region inferred from the geometry of the principle stress axes and fault orientations: A case study for the Prince’s Islands fault segment
European Geosciences Union General Assembly 2015, 12 Nisan 2015
PINAR ALİ,COŞKUN ZEYNEP,MERT AYDIN,KALAFAT DOGAN
|
Suture Retention Strength of Bilayer Vascular Grafts Made of PCL, PLA, and Their Copolymer
Structure and Structural Mechanics of Textiles (STRUTEX), 2 Aralık 2024
SEZGİN HANDE,ÖZDEMİR SUZAN,YALÇIN ENİŞ İPEK,YOLGÖSTEREN ATIF,ÖZTEMUR JANSET
|
Intraoperative lateral wall breach simulation in the cadaveric spine and the impact of thread designs of screws on pullout strength in the osteoporotic thoracic vertebrae: A biomechanical study in human cadavers.
Acta Orthopaedica et Traumatologica Turcica, Vol. 58, No. 1, Şubat 2024, s. 57-61, ISSN: 1017-995X
KAYA ÖZCAN,ÖZKUNT OKAN,SUNGUR MUSTAFA,ÇAKIR MEHMET SEMİH,BAYDOĞAN MURAT,SARIYILMAZ KERİM
|
Effect of grain size distribution on stress-strain behavior of lunar soil simulants
Advances in Space Research, Vol. 60, No. 3, Ağustos 2017, s. 636-651, ISSN: 02731177
MONKUL MEHMET MURAT,DACİC AMİNA
|
Fall cone behavior of non-plastic silts and undrained shear strength from DSS tests
Géotechnique Letters, Vol. 10, No. 2, Haziran 2020, s. 296-302, ISSN: 2045-2543
MONKUL MEHMET MURAT, KENDİR SENA BEGÜM, SAĞIROĞLU ONAT CAN, KOÇ ALİ NADİR, ŞARKBÜLBÜLÜ EKİN
|
Influence of gradation on shear strength and volume change behavior of silty sands
Geomechanics and Engineering, Vol. 5, No. 5, 2013, s. 401-417
MONKUL MEHMET MURAT
|
An Experimental Study of Strength Increase in Masonry Wall Reinforced by One-sided Khorasan Mortar with Steel Mesh
Civil Engineering Journal, Vol. 9, No. 12, Aralık 2023, s. 3233-3253, ISSN: 2676-6957
ÖZTAŞ VOLKAN,TORUNBALCI NECDET
|
Suture Retention Strength of Bilayer Vascular Grafts Made of PCL, PLA and their Copolymer
Structure and Structural Mechanics of Textiles (STRUTEX 2024), 2 Aralık 2024
ÖZDEMİR SUZAN,SEZGİN HANDE,ÖZTEMUR SEZGİN JANSET,YALÇIN ENİŞ İPEK,YOLGÖSTEREN ATIF
|
Frictional Strength Of North Anatolian Fault In Eastern Marmara Region
EARTH, PLANETS AND SPACE, Vol. 68, No. 62, Nisan 2016, s. 1-17, ISSN: 1880-5981
PINAR ALİ,COŞKUN ZEYNEP,MERT AYDIN,KALAFAT DOĞAN
|
Machine learning-based compressive strength estimation in nano silica-modified concrete
Construction and Building Materials, Vol. 408, Aralık 2023, ISSN: 0950-0618
MAHERIAN MAHSA FARSHBAF,BARAN ŞERVAN,BIÇAKÇI SİDAR NİHAT,TÖREYİN UĞUR BEHÇET,ATAHAN HAKAN NURİ
|
Effect of coarse aggregate concentration on the bond properties between steel rebar and concrete within low and medium strength range
Construction and Building Materials, Vol. 449, Ekim 2024, ISSN: 0950-0618
BIÇAKÇI SİDAR NİHAT,TÜRKMENOĞLU HASAN NURİ,BARAN ŞERVAN,ABOKAF OSAMA,MAHERIAN MAHSA FARSHBAF,ATAHAN HAKAN NURİ
|
Machine Learning-Based Framework for Failure Forecast and Shear Strength Estimation of Non-Conforming RC Shear Walls
Journal of Earthquake Engineering, Vol. 28, Nisan 2024, ISSN: 1363-2469
TAN MEHMET,TAŞKIN KAYA GÜLŞEN,DEĞER ZEYNEP
|
The impact of nitrogen-doped reduced graphene oxide reinforcement on the thermal and mechanical properties of CFRP
Carbon Trends, Vol. 15, Haziran 2024, ISSN: 2667-0569
SOYUGÜZEL TAHİR,MECİTOĞLU ZAHİT,KAFTELEN ODABAŞI HÜLYA
|
Experimental Investigation of Processing Temperature Effect on Adhesive Bond Strength Between Engineering Thermoplastics in the Plastic Injection Molding Process
Journal of Manufacturing Science and Engineering, Vol. 146, Temmuz 2024, ISSN: 1087-1357
ÖZEL ALİ,SÖYLEMEZ EMRECAN
|
Evaluation of Microsilica and Nanosilica on Bond Properties between Moderate–High Strength Concrete and Plain–Ribbed Steel Rebar
Journal of Materials in Civil Engineering, Vol. 36, Şubat 2024, ISSN: 0899-1561
BIÇAKÇI SİDAR NİHAT,BARAN ŞERVAN,BOYACI BÜŞRA,TÜRKMENOĞLU HASAN NURİ,TURAN ÖMER TUĞRUL,ATAHAN HAKAN NURİ
|
Suture Retention Strength of Bilayer Vascular Grafts Made of PCL, PLA, and Their Copolymer
STRUTEX 2024, Liberec/ÇEK CUMHURİYETİ, 2 Aralık 2024
ÖZDEMİR SUZAN,SEZGİN HANDE,ÖZTEMUR JANSET,YOLGÖSTEREN ATIF,YALÇIN ENİŞ İPEK
|
Seismic upgrading of infilled RC frames having low concrete strength using engineered composites under cyclic and axial loading
Structures, Vol. 58, Aralık 2023, s. 1-23, ISSN: 2352-0124
ÖZKAN CEMİL,ÖKTEN MEHMET SELİM,GENÇOĞLU MUSTAFA,SAYIN BARIŞ
|