Experimental and MD simulation study on the physical and mechanical properties of organically modified montmorillonite clay and compatibilized linear low density polyethylene nanocomposites
Journal of Applied Polymer Science, Vol. 135, No. 6, Şubat 2018, s. 45817-45828, ISSN: 0021-8995
YİLDİRİM EROL,YURTSEVER MİNE,ERİMAN BÜLENT,UYANİK NURSELİ
|
The Effect of Manganese Sulfide Inclusions and Zirconium Additions on the Mechanical Properties of Heavy Section Cast Steel
International Journal of Metalcasting, Vol. 12, No. 2, Nisan 2018, s. 383-395, ISSN: 1939-5981
AYDIN ERSEL, ARISOY CEVAT FAHİR, ŞEŞEN MUSTAFA KELAMİ
|
Influence of Boronizing on Mechanical Properties of EN-C35E Steel
Key Engineering Materials, Vol. 2, Mayıs 2004, s. 629-632, ISSN: 1662-9795
YAPAR UMUT,BAŞMAN GÖKHAN,ARISOY CEVAT FAHİR,YEŞİLÇUBUK ALPER,ŞEŞEN MUSTAFA KELAMİ
|
The Effect of Decatizing on The Mechanical Properties and Handle of Wool Fabrics
CIRAT 4, Monastir/TUNUS, 2 Aralık 2010, s. 184-187
KALAOĞLU FATMA,SARIÇAM CANAN,KURŞUN BAHADIR SENEM,ERYÜRÜK SELİN HANİFE,JEVSNİK SİMONA
|
Flexural fatigue damage analyses of recycled rubber-modified epoxy-based composites reinforced with alumina fibres
FATIGUE FRACTURE OF ENGINEERING MATERIALS STRUCTURES, Vol. 42, No. 4, Nisan 2019, s. 959-971, ISSN: 8756-758X
İREZ ALAEDDİN BURAK,MİSKİOGLU İBRAHİM,BAYRAKTAR EMİN
|
Effect of ionomer/multiplet formation on mechanical properties and ascorbic acid release behavior of PNIPAAm hydrogels copolymerized by DMAEMA, DMAPMAAm and MAPTAC
Iranian Polymer Journal, Vol. 28, Ekim 2019, s. 977-990, ISSN: 1026-1265
ŞİMŞEK CEYDA,EROĞLU ZEYNEP EZGİ,ERBİL CANDAN
|
Effects of TEMED and EDTA on the Structural and Mechanical Properties of NIPAAm/NaMMT Composite Hydrogels
OURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS, Vol. 48, 2010, s. 1256-1264
YUMAKGİL KÜBRA,GÖKÇEÖREN ARGUN TALAT,ERBİL CANDAN
|
Effect of ionomer//multiplet formation on mechanical properties and ascorbic acid release behavious of PNIPAAm hydrogels copolymerized by DMAEMA DMAPMAAm and MAPTAC
IRANIAN POLYMER JOURNAL, Vol. 28, Ekim 2019, s. 977-990, ISSN: 1026-1265
ŞİMŞEK CEYDA,EROĞLU ZEYNEP EZGİ,ERBİL CANDAN
|
EFFECT OF SEQUENTIAL MILLING (MECHANICAL ALLOYING-CRYOGENICMILLING) ON THE MICROSTRUCTURAL AND MECHANICAL PROPERTIES OF TIB2REINFORCED AL-12.6 WT. SI MMCS
BRAMAT 2017, Brasov/ROMANYA, 7 Mart 2017, s. 119
TEKOĞLU EMRE,MERTDİNÇ SIDDIKA,AĞAOĞULLARI DUYGU,ÖVEÇOĞLU MUSTAFA LUTFİ
|
Effect of NbB2 Addition on the Microstructure and Mechanical Properties of Mechanically Alloyed Al 12 6Si Alloys
MMME 2016 (•3rd International Conference on Mining, Material and Metallurgical Engineering ), BUDAPEŞTE/MACARİSTAN, 22 Ağustos 2016
TEKOĞLU EMRE,MERTDİNÇ SIDDIKA,GÖKÇE HASAN,AĞAOĞULLARI DUYGU,ÖVEÇOĞLU MUSTAFA LUTFİ
|
Assessment of the effects of heat input on microstructure and mechanical properties in laser beam welded Haynes 188 undermatched joints
Materials Science and Engineering: A, Vol. 559, Ocak 2013, s. 731-741, ISSN: 09215093
ODABAŞI AKIN,ÜNLÜ NECİP,GÖLLER GÜLTEKİN,KAYALI EYÜP SABRİ,ERUSLU MEHMET NİYAZİ
|
CHARACTERIZATION INVESTIGATIONS OF MICROSTUCTURAL and MECHANICAL PROPERTIES OFAl15Si2 5Cu0 5Mg xCeO2 x 0 5 wt to 5 wt COMPOSITES via MECHANICAL ALLOYING andPRESSURELESS SINTERING
IMSP'16 (16th International Materials Symposium), 12 Ekim 2016
TEKOĞLU EMRE,MERTDİNÇ SIDDIKA,İMER CEREN,GÖKÇE HASAN,ÖVEÇOĞLU MUSTAFA LUTFİ
|
Influence of La2O3 x 0 5 to 5 wt addition on the microstructure and mechanical properties of mechanically alloyed Al 15Si 2 5Cu 0 5Mg alloys
ICMPM 2016, 14 Aralık 2016
TEKOĞLU EMRE,MERTDİNÇ SIDDIKA,GÖKÇE HASAN,AĞAOĞULLARI DUYGU,ÖVEÇOĞLU MUSTAFA LUTFİ
|
Predicting Cutting Performance of Chisel Tools by Using Physical and Mechanical Properties of Natural Stones
European Rock Mechanics Symposium (EUROCK 2012, 28 Mayıs 2012
ÇOPUR HANİFİ,BALCI CEMAL,BİLGİN NUH,TUMAÇ DENİZ,AVUNDUK EMRE
|
The effect of mechanical properties on performance of diamond wire machines
THE FIFTH THAILAND SYMPOSIUM ON ROCK MECHANICS, 22 Ocak 2015
TUMAÇ DENİZ,AVUNDUK EMRE,BAŞYİĞİT MİKAİL,ÇOPUR HANİFİ,BALCI CEMAL,ER SELMAN
|
Estimation of the performance of chain saw machines from shore hardness and the other mechanical properties
SINOROCK 2013, 18 Haziran 2013
TUMAÇ DENİZ,AVUNDUK EMRE,ÇOPUR HANİFİ,BİLGİN NUH,BALCI CEMAL
|
Mechanical properties and oxidation behavior of TiB2-GNP composites
19th International Metallurgy and Materials Congress, 25 Ekim 2018, s. 462
OCAK BURAK ÇAĞRI,ŞAHİN FİLİZ,GÖLLER GÜLTEKİN,AKIN KARADAYI İPEK
|
Phenolic Naphthoxazines as Curing Promoters for Benzoxazines
MACROMOLECULES, Vol. 51, No. 5, 2018, s. 1688-1695, ISSN: 0024-9297
KAYA GİZEM,KIŞKAN BARIŞ,YAĞCI YUSUF
|
Effects of TEMED and EDTA on the structural and mechanical properties of NIPAAm Na MMT composite hydrogels
Journal of Polymer Science Part B: Polymer Physics, Vol. 48, No. 12, Haziran 2010, s. 1256-1264, ISSN: 08876266
YUMAKGİL KÜBRA, GÖKÇEÖREN ARGUN TALAT, ERBİL CANDAN
|
Thermal and mechanical properties of polypropylene nanocomposite materials Reinforced with cellulose nano whiskers
Journal of Applied Polymer Science, Vol. 125, No. 4, Ağustos 2012, s. 2882-2889, ISSN: 0021-8995
BAHAR ELİF,UÇAR NURAY,ÖNEN HACER AYŞEN,WANG YOUJİANG,ÖKSÜZ MUSTAFA,AYAZ ONUR,UÇAR MEHMET,DEMİR ALİ
|