Evaluation of Geometrical Deviations and Porosities on Both CFRP and AISI 316L Steel Material on Additive Manufacturing
Additive Manufacturing Conference 2019, İstanbul, Türkiye, İstanbul/TÜRKİYE, 17 Eylül 2019
YÜCEL AYSU HANDE, BAKKAL MUSTAFA, TİMUR AZMİ
|
An integrated decision aid extension to material selection problem
Materials & Design, Vol. 31, No. 9, Ekim 2010, s. 4398-4402, ISSN: 02613069
ÇİÇEK KADİR,ÇELİK METİN,TOPCU YUSUF İLKER
|
Synthesis of Zirconia/Magnesia Composite Coating on AZ91 Magnesium Alloy
The 2nd International Conference on Material Science and Technology (IMSTEC 2017), 11 Ekim 2017, s. 301-304
SELVİ EKİN,MUHAFFEL FAİZ,BAYDOĞAN MURAT
|
Experimental collapse investigation and nonlinear modeling of a single-span stone masonry arch bridge
Engineering Failure Analysis, Vol. 152, Ekim 2023, ISSN: 1350-6307
MENTEŞE VİLDAN GİZEM, GÜNEŞ OĞUZ, ÇELİK OĞUZ CEM, GÜNEŞ BURCU, AVŞİN AYŞE, YAZ MEHMET
|
Controlling Melt Pool Dimensions over a Wide Range of Material Deposition Rates in Electron Beam Additive Manufacturing
Solid Freeform Fabrication Symposium, Austin, Texas/AMERİKA BİRLEŞİK DEVLETLERİ, 9 Ağustos 2010, s. 571-582
SÖYLEMEZ EMRECAN,BEUTH JACK,TAMİNGER KAREN
|
Digital twin modelling for optimizing the material consumption: A case study on sustainability improvement of thermoforming process
Sustainable Computing: Informatics and Systems, Vol. 35, No. 100655, Ocak 2022, s. 1-9, ISSN: 2210-5379
TURAN ERHAN, KONUŞKAN YİĞİT, YILDIRIM NİHAN, TUNÇALP DENİZ, İNAN MEHMET, YASİN OĞUZ, TURAN BÜRYAN, KERİMOĞLU VÜGAR
|
Viscosity Properties of Biocompatible Gelatin Based Solutions with Glucose and Sodium Chloride
2nd International Conference on Organic Electronic Material Technologies, 17 Mayıs 2016
KOYUNCU NESLİHAN,ULUSARAÇ İLKE,ACAR FATMA GÜLAY
|
Remediation of acid mine drainage with recycled concrete aggregates and fly ash
ENVIRONMENTAL GEOTECHNICS, Vol. 11, No. 1, Nisan 2023, s. 15-28, ISSN: 2051-803X
YALÇIN DAYIOĞLU ASLI,CETİN BORA,MAHEDİ MASRUR,JONES STEPHANİE
|
Effect of Cyclic True-Triaxial Boundary Types on Stress-Strain Behavior of Unbound Material
Geo-Congress 2023, Los Angeles/AMERİKA BİRLEŞİK DEVLETLERİ, 26 Mart 2023
AYDIN CEREN,COBAN HALUK SINAN,HATİPOĞLU MUSTAFA,CETİN BORA,CEYLAN HALİL
|
Biowaste valorization into valuable nanomaterials: Synthesis of green carbon nanodots and anode material for lithium-ion batteries from watermelon seeds
Elsevier BV, Vol. 169, Ocak 2024, ISSN: 0025-5408
ASHRAF HUMZA, KARAHAN BİLLUR DENİZ
|
Quasi static and pseudo dynamic testing of infilled RC frames retrofitted with CFRP material
Composites Part:B, Vol. 42, 2011, s. 238-263
ÖZKAYNAK HASAN,YÜKSEL ERCAN,YALÇIN MEHMET CEM,DİNDAR AHMET ANIL,ORAL BÜYÜKÖZTÜRK
|
Impact of support material type on performance of dynamic membrane bioreactors treating municipal wastewater
Journal of Chemical Technology & Biotechnology, Vol. 95, No. 9, Nisan 2020, s. 2437-2446, ISSN: 0268-2575
IŞIK ONUR, HUDAYARİZKA RİZA, ABDELRAHMAN AMR MUSTAFA, ÖZGÜN ERŞAHİN HALE, ERŞAHİN MUSTAFA EVREN, DEMİR İBRAHİM, KOYUNCU İSMAİL
|
Growth of ZnO Nanostructures on Biopolymer Films
Journal of Material Scinece and Engineering (A&B), Vol. 2, No. 12, 2012, s. 761-768
KILIÇ BAYRAM,SALOĞLU DİDEM,ENGİN KOSA,TRABZON LEVENT,KIZIL HASAN
|
Silver recovery from dental amalgam wastes
Material Science and Engineering International Journal, Vol. 3, No. 5, Ekim 2019, s. 172-176, ISSN: 2574-9927
YILMAZ EMRE,ERTÜRK SELİM,ARSLAN CÜNEYT,ARSLAN FATMA
|
The effect of phase change material (PCM) utilization on air-cooled condenser capacity
Alternative Energy Sources, Materials Technologies (AESMT’18), 13 Mayıs 2018, ISSN: 2603-364X
YALÇIN ENVER,KILIC ALEVAY,AYDIN AHMET ALPER
|
A comparative study for obtaining effective Leaf Area Index from single Terrestrial Laser Scans by removal of wood material
MEASUREMENT, Vol. 178, Ocak 2021, ISSN: 0263-2241
ARSLAN ADİL ENİS, ERTEN ESRA, İNAN MUHİTTİN
|
The efficiency of several surface treatments on bond strength of resin cement to I ceram core material
22nd Annual ConferenceEuropean Prosthodontic Association
SEN D, POYRAZOGLU E, TUNCELİ B, GOLLER G
|
Using commercially available cost-effective Zn(II) phthalocyanine as hole-transporting material for inverted type perovskite solar cells and investigation of dopant effect
Synthetic Metals, Vol. 282, Ekim 2021, ISSN: 0379-6779
DALKILIÇ ZEYNEP, KALKAN BURAT AYFER
|
A Building Material Information System BMIS In the Context of CONNET Turkey Project
ECPPM 2004 – European Conference on Product and Process Modelling in the AEC Industry e–Work and eBusiness in AEC, İSTANBUL/TÜRKİYE, 8 Eylül 2004, s. 297-302
TAŞ ELÇİN FİLİZ,TANAÇAN LEYLA,YAMAN HAKAN,DİKBAŞ HÜSEYİN ATİLLA
|
Investigation of interaction behaviours of cesium and strontium ions with engineering barrier material to prevent leakage to environmental
Journal of Environmental Radioactivity, Vol. 213, Ocak 2020, s. 106101, ISSN: 0265-931X
ERENTÜRK SEMA, HACIYAKUPOĞLU SEVİLAY, ŞENKAL BAHİRE FİLİZ
|