Fabric Form: C.A.S.T. Workshop at METU
Orta Doğu Teknik Üniversitesi, Manitoba Üniversitesi, Eskişehir Osmangazi Üniversitesi, İstanbul Kemerburgaz Üniversitesi İşbirliği ile, ODTÜ Mimarlık Fakültesi, 18 Mayıs 2012 - 21 Mayıs 2012
C.A.S.T. CENTER FOR ARCHİTECTURAL STRUCTURES AND TECHNOLOGY, UNİVERSİTY OF MANİTOBA, ODTÜ MİMARLIK BÖLÜMÜ, MİMARLAR ODASI ANKARA BÜYÜKKENT ŞUBESİ
|
High Temperature Oxidation Behavior of High Al-Si Alloyed Vermicular Graphite Cast Iron for Internal Combustion Engine’s Hot-End Exhaust Components
Metals, Vol. 14, No. 5, Mayıs 2024, s. 17, ISSN: 2075-4701
YILMAZ RIFAT,BAYATA SOLAK FATMA,SOLAK NURİ
|
Evaluation of interface shear strength between interlocked geofoam blocks and cast-in-place concrete
5th International Conference on Geofoam Blocks in Construction Applications, Girne/KUZEY KIBRIS TÜRK CUMHURİYETİ, 9 Mayıs 2018, s. 207-218
ÖZER ABDULLAH TOLGA,EKİNCİOĞLU ÖZGÜR
|
Tribological behaviour of pressure infiltration cast carbon composites
XIIth International Conference on Glass andCeramics
GOLLER G, KOTTY DP, TEWARİ SN, SİNGH S, TEKİN A
|
“Estimating Network Internal Link Loss Behavior From End-to-End Multi-cast Measurements
IEEE WCNC 2006, 3 Nisan 2006
COLERİ ERGEN SİNEM, VARAİYA PRAVİN, ERGEN MUSTAFA
|
Imprinting Bone Surface Topography on Cast Metal
Bulletin of Materials Science and Metallurgy, Ocak 2024, ISSN: 3023-6509
ÜRETMEN AYBÜKE,KILIÇ ABDULHALİM
|
Tribological Investigation of Austempered Grey Cast Iron for Automotive Components under Dry Sliding Conditions
TurkeyTrib’15, İstanbul/TÜRKİYE, 7 Ekim 2015
MALCIOĞLU ULAŞ,YÜREKTÜRK YAKUP,MUHAFFEL FAİZ,BAYDOĞAN MURAT
|
Tribological Performance of Cast Polyamide Under Relatively High Temperatures
6th Biennial Conf. On Engineering Design and Analysis, ASME International, İstanbul/TÜRKİYE, 8 Temmuz 2002
PARLAR ZEYNEP,TEMİZ VEDAT
|
Effect of surface roughness on friction induced noise in cast polyamide
Inter-Noise 2007, İĞstanbul/TÜRKİYE, 28 Ağustos 2007
PARLAR ZEYNEP,TEMİZ VEDAT
|
Abrasive Wear Behaviours of As Cast and Austempered Ductile Irons
The Federation of the European Materials Societies FEMS, Münih/ALMANYA
KÖKDEN M.U., BAYDOGAN M., CİMENOGLU H.
|
High Temperatures Abrasive Wear Behaviour of High Cr Ni Cast Steels
Euromat 2007, Nürnberg/ALMANYA, 10 Eylül 2007
SUN Y., AHLATCİ H., CİMENOGLU H.
|
Dry Sliding Wear of As Cast and Austempered Ductile Irons
4th Balkan Tribology Conference
ÇELİK O., AHLATCİ H., CİMENOGLU H., KAYALİ E.S.
|
Abrasive Wear of Nb and Ti Added White Cast Iron
4th Balkan Tribology Conference
ARIKAN M.M., CİMENOGLU H., KAYALİ E.S.
|
Characterization of austempered ductile and vermicular graphite high simo and alsimo alloyed cast iron
Fen Bilimleri Enstitüsü, İstanbul Teknik Üniversitesi, 2016
ALPER ÖZDEMİR
|
The Effect of Microstructure on Nitriding Mechanism of Cast Iron
International Journal of Metalcasting, Vol. 14, No. 4, Ekim 2020, s. 1033-1040, ISSN: 1939-5981
KONDAKÇI EMİN, SOLAK NURİ
|
Effect of surface roughness on friction induced noise in cast polyamide
Inter-Noise 2007, İstanbul/TÜRKİYE, 27 Ağustos 2007, s. 207
TİBET ERKAN, PARLAR ZEYNEP, TEMİZ VEDAT
|
The Investigation of Friction and Wear Characteristic of Cast Iron against Manganese Phosphate Coated and Austempered Compressor Crankshaft
FME Transactions, Vol. 43, Haziran 2015, s. 186-190, ISSN: 2406-128X
BARIŞ İSHAK SIPCIKOĞLU, YİĞİT BURCU, OFLAZ HÜSEYİN, PARLAR ZEYNEP, TEMİZ VEDAT
|
The Effect of Internal Lubrication and Graphite Filler on the Friction and Wear Properties of Cast Polyamide 6
Balkantrib’2002, 4th Int.Conf. on Tribology, Kayseri/TÜRKİYE, 12 Haziran 2002, s. 497-503
TEMİZ VEDAT, PARLAR ZEYNEP
|
THE INVESTIGATION OF FRICTION COEFFICIENT AND WEAR CHARACTERISTIC OF GRAY CAST IRON AGAINST REINFORCED POLYTETRAFLUOROETHYLENE PTFE IN REFRIGERATOR COMPRESSORS CRANKSHAFT AND BEARINGS
12th International Tribology Conference BULTRIB’xx16, Sofya/BULGARİSTAN, Vol. 6, 27 Ekim 2016
KAYA İSMAİL,GİRİŞTA VİLDAN,PARLAR ZEYNEP,TEMİZ VEDAT
|
Tribological Performance of Cast Polyamide Under Relatively High Temperatures
6th Biennial Conf. On Engineering Design and Analysis, ASME International, İstanbul/TÜRKİYE, 8 Temmuz 2002, s. 14
PARLAR ZEYNEP, TEMİZ VEDAT
|