Numerical Modeling of Single Storey Precast Frame’s Pinned Connections with a Special Damper
4th ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering, Kos Adası/YUNANİSTAN, 12 Haziran 2013, s. 1533-1549
SOYDAN CİHAN,YÜKSEL ERCAN,İRTEM ERDAL
|
Manyeto-Reolojik Damper Davranişina Kutup Başi Geometrisi Etkisinin Deneysel İncelenmesi
4rd International Advanced Technologies Symposium, Konya/TÜRKİYE, 28 Eylül 2005
ŞAHİN İSMAİL,ENGİN TAHSİN,MORGÜL ÖMER KADİR
|
Valve Design at a Twintube Damper used in a Pickup Truck
ASEM 2011 Korea
KOCABAL YUSUF ZİYA
|
Determination of the Characteristics of a New Prestressed Lead Extrusion Damper
16th World Conference on Earthquake Engineering, Santiago/ŞİLİ, 9 Ocak 2017
SOYDAN CİHAN,YÜKSEL ERCAN,İRTEM ERDAL
|
Determination of the Characteristics of a New Prestressed Lead Extrution Damper
16th World Conference on Earthquake Engineering, 9 Ocak 2017
SOYDAN CİHAN,YÜKSEL ERCAN,İRTEM ERDAL
|
Development and control of an active torsional vibration damper for vehicle powertrains
Lisansüstü Eğitim Enstitüsü, İstanbul Teknik Üniversitesi, 2021
ALİŞAN YÜCEŞAN
|
Depreme yönelik olarak yarı-aktif kontrollü manyetik damper tasarımı ve uygulaması
Fen Bilimleri Enstitüsü, Sakarya Üniversitesi, 2020
MUAZ KEMERLİ
|
Numerical modelling and simulation of a squeeze film damper
Fen Bilimleri Enstitüsü, İstanbul Teknik Üniversitesi, 2020
EKİN AKBULUT
|
Development and Cyclic Behavior of U-Shaped Steel Dampers with Perforated and Nonparallel Arm Configurations
International Journal of Steel Structures, Vol. 18, No. 5, Aralık 2018, s. 1741-1753, ISSN: 1598-2351
ATASEVER KURTULUŞ,ÇELİK OĞUZ CEM,YÜKSEL ERCAN
|
Optimal Damper Distribution for Seismic Retrofit by Using A Hybrid GA and A Nonlinear Response Analysis
AIJ Annual Conference 2017, Hiroshima/JAPONYA, 31 Ağustos 2017
PANUMAS SAINGAM,FUJİSHİTA KAZUHİRO,SÜTCÜ FATİH,RYOTA MATSUİ,TAKEUCHİ TORU
|
Optimal damper distribution for seismic retrofit by using Hybrid Genetic Algorithm implementing non linear response analysis
International Association of Shell and Spatial Structures IASS Annual Conference 2016, TOKYO/JAPONYA, No. 1217, 26 Eylül 2016
KAZUHIRO FUJISHITA,SÜTCÜ FATİH,MATSUI RYOTA,TAKEUCHI TORU
|
Response Control of Retrofitted RC Frame with Viscous Braced Damper and Closed Steel Frames Including Effect of Composite Behavior
Architectural Institute of Japan (AIJ) Annual Conference 2021, TOUKAI/JAPONYA, 5 Eylül 2021
PANUMAS SAINGAM, SÜTCÜ FATİH, YUKİ TERAZAWA, ÇELİK OĞUZ CEM, TAKEUCHİ TORU
|
Response Control of Retrofitted RC Frame with Viscous Braced Damper and Closed Steel Frames including Effect of Composite Behavior
AIJ Annual Convention 2021, Taikai/JAPONYA, 7 Eylül 2021
SAİNGAM PANUMAS, SÜTCÜ FATİH, TERAZAWA YUKİ, ÇELİK OĞUZ CEM, TAKEUCHI TORU
|
Numerical analysis of a monotube mixed mode magnetorheological damper by using a new rheological approach in CFD
Rheologica Acta, Vol. 60, No. 1, Ocak 2021, s. 77-95, ISSN: 0035-4511
KEMERLİ MUAZ,ENGİN TAHSİN
|
Investigation of The Effects of Temperature Variations On The Magnetorheological Damper Behaviour
15th International Research/Expert Conference,“Trends in the Development of Machinery and Associated Technology, Prag/ÇEK CUMHURİYETİ, 12 Eylül 2011
ŞAHİN İSMAİL,PARLAK ZEKERİYA,ENGİN TAHSİN
|
Manyetik Sıvılı Damper (Sönümleyici) Davranışının Sanki-Statik Akış Modeli İle Kestirimi
ULIBTK’07, Ulusal Isı Bilimi ve Tekniği Kongresi, Kayseri/TÜRKİYE, 30 Mayıs 2007
ENGİN TAHSİN,ÇEŞMECİ ŞEVKİ,ŞAHİN İSMAİL,PARLAK ZEKERİYA
|
MR Damper İçindeki Akışın HAD Yöntemi ile Analizi
OTEKON 08 4. Otomotiv Teknolojileri Kongresi, Bursa/TÜRKİYE, 1 Haziran 2008
PARLAK ZEKERİYA,ENGİN TAHSİN,ÇALLI İSMAİL
|
Optimal Magnetorheological Damper Configuration Using the Taguchi Experimental Design Method
JOURNAL OF MECHANICAL DESIGN, Vol. 135, No. 8, Ağustos 2013, s. 81008, ISSN: 1050-0472
PARLAK ZEKERİYA,ENGİN TAHSİN,ŞAHİN İSMAİL
|
DESIGN AND TESTING OF A MAGNETORHELOGICAL (MR) DAMPER FOR TRACTOR SEAT
9th Int. Research/Expert Conference Trends in the development of Machinery and associated Technology, TMT2005, Antalya/TÜRKİYE, 26 Eylül 2005
ŞAHİN İSMAİL,MORGÜL ÖMER KADİR,ENGİN TAHSİN
|
Development of Finite Element Model for a Special Lead Extrusion Damper
Sakarya University Journal of Science, Vol. 25, No. 5, Ekim 2021, s. 1159-1167, ISSN: 1301-4048
GÜLLÜ AHMET, ÇALIM FURKAN, SOYDAN CİHAN, YÜKSEL ERCAN
|