ARAMA SONUÇLARI

Toplam 31 adet sonuçtan 20 tanesi görüntülenmektedir.

Arama









Yıllara göre arama

Özel Aralık Girişi

Investigation of Uncertainty Changes in Model Outputs for Finite Element Model Updating Using Structural Health Monitoring Data
Journal of Structural Engineering, VA/AMERİKA BİRLEŞİK DEVLETLERİ, Vol. 140, No. 11, Kasım 2014, s. 4014078, ISSN: 0733-9445
ERDOĞAN YILDIRIM SERHAT,GÜL MUSTAFA,ÇATBAŞ NECATİ,GÜNDEŞ BAKIR PELİN
Structural identification St Id using finite element models for optimum sensor configuration and uncertainty quantification
Finite Elements in Analysis and Design, Amsterdam/HOLLANDA, Vol. 81, Nisan 2014, s. 1-13, ISSN: 0168874X
ERDOĞAN YILDIRIM SERHAT,ÇATBAŞ NECATİ,GÜNDEŞ BAKIR PELİN
Evaluation of the different genetic algorithm parameters and operators for the finite element model updating problem
Computers and Concrete, DAEJEON/GÜNEY KORE, Vol. 11, No. 6, Haziran 2013, s. 541-569, ISSN: 1598-8198
ERDOĞAN YILDIRIM SERHAT,GÜNDEŞ BAKIR PELİN
PARAMETRIC FINITE ELEMENT MODEL UPDATING OF BRICK MASONRY MINARETS BY USING OPERATIONAL MODAL ANALYSIS METHOD
Mühendislik, Isfahan Üniversitesi, 2023
RAZİE TALEBİ
Ömer Dabanlı Tez Yüksek Lisans Tamamlandı
Influence of heat treatments on the formability of the 6061 Al alloy sheets: experiments and GTN damage model
The International Journal of Advanced Manufacturing Technology, Vol. 113, Nisan 2021, s. 2277-2299, ISSN: 14333015 02683768
YILDIZ RAŞİD AHMED, YILMAZ ŞAFAK
A Numerical Study on the Estimation of Liquefaction-Induced Free-Field Settlements by Using PM4Sand Model
KSCE JOURNAL OF CIVIL ENGINEERING, Vol. 26, No. 2, Ocak 2022, s. 12, ISSN: 1226-7988
SUBAŞI OZAN, KOLTUK SERDAR, İYİSAN RECEP
Finite element simulation of the behavior of the periodontal ligament A validated nonlinear contact model
Journal of Biomechanics, Vol. 47, No. 12, Eylül 2014, s. 2883-2890, ISSN: 00219290
TUNA MERAL,SÜNBÜLOĞLU EMİN,BOZDAĞ SÜREYYA ERGÜN
Experimental Investigation of GTN model parameters of 6061 Al alloy
EUROPEAN JOURNAL OF MECHANICS A-SOLIDS, Vol. 83, Ekim 2020, ISSN: 0997-7538
YILMAZ ŞAFAK,YILDIZ AHMET RAŞİT
Impact behavior of model porous concretes
MATERIALS AND STRUCTURES, Vol. 52, No. 5, Ekim 2019, ISSN: 1359-5997
AĞAR ÖZBEK AYDA ŞAFAK,WEERHEİJM JAAP,VAN BREUGEL KLAAS
Mechanical response of textile reinforced cementitious composite tubes under monotonic and cyclic loadings
CONSTRUCTION AND BUILDING MATERIALS, Vol. 251, Ağustos 2020, ISSN: 0950-0618
GENÇOĞLU MUSTAFA,DÖNMEZ AHMET ABDULLAH,DONMEZ DİDEM
Mechanical response of textile reinforced cementitious composite tubes under monotonic and cyclic loadings
Construction and Building Materials, Vol. 251, Ağustos 2020, s. 118963, ISSN: 0950-0618
DÖNMEZ DİDEM,DÖNMEZ AHMET ABDULLAH,GENÇOĞLU MUSTAFA
Numerical Analysis of Historic Structural Elements Using 3D Point Cloud Data
The Open Construction & Building Technology Journal, Vol. 10, Mayıs 2016, s. 233-245, ISSN: 1874-8368
ALMAÇ UMUT,POLAT PEKMEZCİ IŞIL,AHUNBAY METİN
Finite element model of the Jefferson fracture comparison with a cadaver model
European Spine Journal, Vol. 10, No. 3, Haziran 2001, s. 257-263, ISSN: 0940-6719
BOZKUŞ MUHTAR HAKAN,KARAKAŞ AŞKIN,HANCI MEHMET MURAT,UZAN MUSTAFA,BOZDAĞ SÜREYYA ERGÜN,SARIOĞLU ALİ
Süreyya Ergün Bozdağ Özgün Makale
Numerical model for an IWRC bending over sheave problem and its finite element solution
nt. Conf. on Applied, Numerical and Computational Mathematics, ICANCM’xx11, Barcelona/İSPANYA, 15 Eylül 2011, s. 199-205
İMRAK CEVAT ERDEM,ERDÖNMEZ CENGİZ
Cevat Erdem İmrak Tam metin bildiri
Finite element simulation of the behavior of the periodontal ligament A validated nonlinear contact model
Journal of Biomechanics, Vol. 47, No. 12, Eylül 2014, s. 2883-2890, ISSN: 00219290
TUNA MERAL, SUNBULOGLU EMİN, BOZDAG ERGUN
Size Effect on Punching Strength of Reinforced Concrete Slabs without and with Shear Reinforcement
ACI Structural Journal, Vol. 114, No. 4, Ağustos 2017, s. 875-886, ISSN: 0889-3241
DÖNMEZ AHMET ABDULLAH,BAZANT ZDENEK P.
Static analysis of higher order shear deformation beam model with mixed finite element formulation
International Conference on Mechanical, Architectural Civil Engineering, IISRO, Dubai/SUUDİ ARABİSTAN, 17 Kasım 2013
ÖZÜTOK ATİLLA,MADENCİ EMRAH,KADIOĞLU FETHİ
Fethi Kadıoğlu Tam metin bildiri
Development of Finite Element Model for a Special Lead Extrusion Damper
Sakarya University Journal of Science, Vol. 25, No. 5, Ekim 2021, s. 1159-1167, ISSN: 1301-4048
GÜLLÜ AHMET, ÇALIM FURKAN, SOYDAN CİHAN, YÜKSEL ERCAN
Furkan Çalım Özgün Makale
Plastic-Damage Modeling of Unreinforced Masonry Walls (URM) Subject to Lateral Loading
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING, Vol. 42, No. 9, 2017, s. 4201-4220, ISSN: 2193-567X
ALGOHİ BASHEER H.,BALUCH MOHAMMED H.,RAHMAN MUHAMMAD K.,AL-GADHİB ALİ H.,DEMİR CEM
Fatigue life prediction of existing crane runway girders
JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH, Vol. 66, No. 10, Ekim 2010, s. 1164-1173, ISSN: 0143-974X
ÇAĞLAYAN BARLAS ÖZDEN,ÖZAKGÜL KADİR,ÖVÜNÇ TEZER,ERDOĞAN UZGİDER

İLETİŞİM BİLGİLERİ

İstanbul Teknik Üniversitesi Rektörlüğü İTÜ Ayazağa Kampüsü Rektörlük Binası, Maslak-Sarıyer / İstanbul Tel: +90 212 285 3930