ARAMA SONUÇLARI

Toplam 35 adet sonuçtan 20 tanesi görüntülenmektedir.

Investigation of Uncertainty Changes in Model Outputs for Finite Element Model Updating Using Structural Health Monitoring Data

Journal of Structural Engineering, VA/AMERİKA BİRLEŞİK DEVLETLERİ, Vol. 140, No. 11, Kasım 2014, s. 4014078, ISSN: 0733-9445

ERDOĞAN YILDIRIM SERHAT,GÜL MUSTAFA,ÇATBAŞ NECATİ,GÜNDEŞ BAKIR PELİN

Pelin Gündeş Bakır Özgün Makale Deprem MühendisliğiStructural health monitoringFinite element model updating

Structural identification St Id using finite element models for optimum sensor configuration and uncertainty quantification

Finite Elements in Analysis and Design, Amsterdam/HOLLANDA, Vol. 81, Nisan 2014, s. 1-13, ISSN: 0168874X

ERDOĞAN YILDIRIM SERHAT,ÇATBAŞ NECATİ,GÜNDEŞ BAKIR PELİN

Pelin Gündeş Bakır Özgün Makale Yapı MekaniğiStructural Health MonitoringFinite Element Model UpdatingYapı Sağlığı İzlemesiHasar TespitiSonlu Elemen Model Güncellemesi

Evaluation of the different genetic algorithm parameters and operators for the finite element model updating problem

Computers and Concrete, DAEJEON/GÜNEY KORE, Vol. 11, No. 6, Haziran 2013, s. 541-569, ISSN: 1598-8198

ERDOĞAN YILDIRIM SERHAT,GÜNDEŞ BAKIR PELİN

Pelin Gündeş Bakır Özgün Makale damage detectionfinite element model updatinggenetic algorithmsoptimization

PARAMETRIC FINITE ELEMENT MODEL UPDATING OF BRICK MASONRY MINARETS BY USING OPERATIONAL MODAL ANALYSIS METHOD

Mühendislik, Isfahan Üniversitesi, 2023

RAZİE TALEBİ

Ömer Dabanlı Tez Yüksek Lisans Tamamlandı

Modeling of polymer matrix composites using VBO model and finite element method formulations

Fen Bilimleri Enstitüsü, Yıldız Teknik Üniversitesi, 2016

ALPEREN ACAR

Özgen Ümit Çolak Çakır Tez Doktora Tamamlandı

Experimental Investigation of GTN model parameters of 6061 Al alloy

EUROPEAN JOURNAL OF MECHANICS A-SOLIDS, Vol. 83, Ekim 2020, ISSN: 0997-7538

YILMAZ ŞAFAK,YILDIZ AHMET RAŞİT

Şafak Yılmaz Özgün Makale 6061 aluminum alloyGTN DamageFinite element analysisTensile testingVoid nucleationRESPONSE-SURFACE METHODOLOGYDUCTILE FRACTURE PREDICTIONSHEET-METALFAILURE ANALYSISVOID NUCLEATIONDAMAGE MODELNUMERICAL-SIMULATIONPLASTIC-DEFORMATIONPIPELINE STEELBEHAVIOR

Influence of heat treatments on the formability of the 6061 Al alloy sheets: experiments and GTN damage model

The International Journal of Advanced Manufacturing Technology, Vol. 113, Nisan 2021, s. 2277-2299, ISSN: 14333015 02683768

YILDIZ RAŞİD AHMED, YILMAZ ŞAFAK

Raşid Ahmed Yıldız Özgün Makale Sheet metal formingGTN damage modelForming limit curveFinite element analysis6061 aluminum alloy

A Numerical Study on the Estimation of Liquefaction-Induced Free-Field Settlements by Using PM4Sand Model

KSCE JOURNAL OF CIVIL ENGINEERING, Vol. 26, No. 2, Ocak 2022, s. 12, ISSN: 1226-7988

SUBAŞI OZAN, KOLTUK SERDAR, İYİSAN RECEP

Recep İyisan Özgün Makale Liquefaction-induced free-field settlements Fully coupled two-dimensional finite element analyses PM4Sand model Semi-empirical methods

Finite element simulation of the behavior of the periodontal ligament A validated nonlinear contact model

Journal of Biomechanics, Vol. 47, No. 12, Eylül 2014, s. 2883-2890, ISSN: 00219290

TUNA MERAL,SÜNBÜLOĞLU EMİN,BOZDAĞ SÜREYYA ERGÜN

Süreyya Ergün Bozdağ Özgün Makale NonlinearModelPeriodontal

Numerical Analysis of Historic Structural Elements Using 3D Point Cloud Data

The Open Construction & Building Technology Journal, Vol. 10, Mayıs 2016, s. 233-245, ISSN: 1874-8368

ALMAÇ UMUT,POLAT PEKMEZCİ IŞIL,AHUNBAY METİN

Umut Almaç Özgün Makale AyateklaSayısal AnalizSarnıç3D ModelFinite element modelLaser scannerMasonryPoint CloudTLS

Finite element model of the Jefferson fracture comparison with a cadaver model

European Spine Journal, Vol. 10, No. 3, Haziran 2001, s. 257-263, ISSN: 0940-6719

BOZKUŞ MUHTAR HAKAN,KARAKAŞ AŞKIN,HANCI MEHMET MURAT,UZAN MUSTAFA,BOZDAĞ SÜREYYA ERGÜN,SARIOĞLU ALİ

Süreyya Ergün Bozdağ Özgün Makale

Mechanical response of textile reinforced cementitious composite tubes under monotonic and cyclic loadings

Construction and Building Materials, Vol. 251, Ağustos 2020, s. 118963, ISSN: 0950-0618

DÖNMEZ DİDEM,DÖNMEZ AHMET ABDULLAH,GENÇOĞLU MUSTAFA

Ahmet Abdullah Dönmez Özgün Makale TRCCCyclic loadingTextile reinforcementMicroplane modelTube-shaped formBrittle failureFinite element simulationMechanical responseMICROPLANE MODEL M7MASONRY WALLSMORTAR TRMCONCRETEBEHAVIORSTRENGTHFRACTUREPULLOUTCRACKFRP

Impact behavior of model porous concretes

MATERIALS AND STRUCTURES, Vol. 52, No. 5, Ekim 2019, ISSN: 1359-5997

AĞAR ÖZBEK AYDA ŞAFAK,WEERHEİJM JAAP,VAN BREUGEL KLAAS

Ayda Şafak Ağar Özbek Özgün Makale Porous concreteImpactFinite element analysisExplicitPLASTIC-DAMAGE MODELSPLITTING FAILUREBRITTLE SOLIDSPORESTRENGTH

Mechanical response of textile reinforced cementitious composite tubes under monotonic and cyclic loadings

CONSTRUCTION AND BUILDING MATERIALS, Vol. 251, Ağustos 2020, ISSN: 0950-0618

GENÇOĞLU MUSTAFA,DÖNMEZ AHMET ABDULLAH,DONMEZ DİDEM

Mustafa Gençoğlu Özgün Makale TRCCCyclic loadingTextile reinforcementMicroplane modelTube-shaped formBrittle failureFinite element simulationMechanical responseMICROPLANE MODEL M7MASONRY WALLSMORTAR TRMCONCRETEBEHAVIORSTRENGTHFRACTUREPULLOUTSYSTEMSCRACK

Sensitivity based finite element model updating using constrained optimization with a trust region algorithm

Journal of Sound and Vibration, LONDRA/İNGİLTERE, Vol. 305, No. 1-2, Ağustos 2007, s. 211-225, ISSN: 0022460X

GÜNDEŞ BAKIR PELİN,REYNDERS EDWIN,DE ROECK GUIDO

Pelin Gündeş Bakır Özgün Makale Hasar Tespiti

Plastic-Damage Modeling of Unreinforced Masonry Walls (URM) Subject to Lateral Loading

ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING, Vol. 42, No. 9, 2017, s. 4201-4220, ISSN: 2193-567X

ALGOHİ BASHEER H.,BALUCH MOHAMMED H.,RAHMAN MUHAMMAD K.,AL-GADHİB ALİ H.,DEMİR CEM

Cem Demir Özgün Makale Unreinforced masonrySandstone wallLimestone wallFinite element simulationPlastic-damage modelLateral load responseMechanistic modelsSHEAR WALLSCONCRETE

Development of Finite Element Model for a Special Lead Extrusion Damper

Sakarya University Journal of Science, Vol. 25, No. 5, Ekim 2021, s. 1159-1167, ISSN: 1301-4048

GÜLLÜ AHMET, ÇALIM FURKAN, SOYDAN CİHAN, YÜKSEL ERCAN

Ercan Yüksel Özgün Makale

Beam Finite Element Model Modification Considering Shear Stiffness: Octet-Truss Unit Cell with Springs

Applied Sciences, Vol. 15, No. 16, Ağustos 2025, s. 8969-8994, ISSN: 2076-3417

GHOLİBEYGİ SOHEİL,ERGÜN HALE,AYHAN BAHAR

Hale Ergün Özgün Makale numerical homogenization; lattice; octet-truss; shear; modification; spring

Beam Finite Element Model Modification Considering Shear Stiffness: Octet-Truss Unit Cell with Springs

Applied Sciences-Basel, Vol. 15, No. 16, Ağustos 2025, ISSN: 2076-3417

GHOLİBEYGİ SOHEİL,ERGÜN HALE,AYHAN BAHAR

Bahar Ayhan Özgün Makale

Finite element simulation of the behavior of the periodontal ligament A validated nonlinear contact model

Journal of Biomechanics, Vol. 47, No. 12, Eylül 2014, s. 2883-2890, ISSN: 00219290

TUNA MERAL, SUNBULOGLU EMİN, BOZDAG ERGUN

Emin Sünbüloğlu Özgün Makale Sonlu Elemanlar YöntemiKatı Cisimlerin MekaniğiBiyo-mekanik

ARAMA SONUÇLARI

Arama

Yıllara göre arama