Implementation of fractional slot concentrated windings to induction machines
7th IET International Conference on Power Electronics, Machines and Drives (PEMD 2014), Manchester/İNGİLTERE, 8 Nisan 2014
GÜNDOĞDU TAYFUN,KÖMÜRGÖZ KIRIŞ GÜVEN,GUNDOGDU BURCU
|
Speed sensorless direct vector control of squirrel cage induction machines
Fen Bilimleri Enstitüsü, İstanbul Teknik Üniversitesi, 2008
EŞREF EMRE ÖZSOY
|
Implementation of fractional slot concentrated windings to induction machines
7th IET International Conference on Power Electronics, Machines and Drives (PEMD 2014), 8 Nisan 2014
GÜNDOĞDU TAYFUN,KÖMÜRGÖZ KIRIŞ GÜVEN
|
Influence of Cage Structure on Rotor Bar Current Waveform and Performance in Induction Machines
2019 1st Global Power, Energy and Communication Conference (GPECOM), Nevşehir/TÜRKİYE, 12 Haziran 2019
GÜNDOĞDU TAYFUN,KÖMÜRGÖZ KIRIŞ GÜVEN,GUNDOGDU BURCU
|
Influence of Cage Structure on Rotor Bar Current Waveform and Performance in Induction Machines
2019 1st Global Power, Energy and Communication Conference (GPECOM), 12 Haziran 2019
GÜNDOĞDU TAYFUN,KÖMÜRGÖZ KIRIŞ GÜVEN,GÜNDOĞDU BURCU
|
A Simple Least Squares Approach for Low Speed Performance Analysis of Indirect FOC Induction Motor Drive Using Low-resolution Position Sensor
2017 IEEE INTERNATIONAL ELECTRIC MACHINES AND DRIVES CONFERENCE (IEMDC 2017), Miami/AMERİKA BİRLEŞİK DEVLETLERİ, 21 Mayıs 2017
ÖZTÜRK SALİH BARIŞ, KIVANÇ ÖMER CİHAN, ATİLA BERKİN, REHMAN SAEED UR, AKIN BİLAL, TOLİYAT HAMİD A
|
A Comprehensive Disturbing Effect Analysis of Multi-Sectional Rotor Slot Geometry for Induction Machines in Electrical Vehicles
IEEE Access, Ocak 2021, ISSN: 2169-3536
GÜLBAHÇE MEHMET ONUR, LORDOĞLU ABDULSAMED, KOCABAŞ DERYA AHMET
|
Equivalent Circuit Based Design Approach of Axial-Flux Induction Generator for Wind Turbines
2023 International Aegean Conference on Electrical Machines and Power Electronics (ACEMP) & 2023 International Conference on Optimization of Electrical and Electronic Equipment (OPTIM), İstanbul/TÜRKİYE, 1 Eylül 2023
ERGUN BATI EREN, ONUR GÜVEN, GÜLBAHÇE MEHMET ONUR, KOCABAŞ DERYA AHMET, DÜŞMEZ SERKAN
|
Equivalent Circuit Based Design Approach of Axial-Flux Induction Generator for Wind Turbines
2023 International Aegean Conference on Electrical Machines and Power Electronics, İSTANBUL/TÜRKİYE, 1 Eylül 2023, ISSN: 2643-3958
ERGUN BATI EREN, GÜLBAHÇE MEHMET ONUR, ONUR GÜVEN, KOCABAŞ DERYA AHMET, DÜŞMEZ SERKAN
|
Measured Efficiency and Power-Factor Improvements of Single- and Three -Phase Induction Motors with Thyristor Controllers
International Conference on Electrical Machines ICEM 98, 2 Eylül 1998
LİN DİGSHENG, FUCHS E F, YILDIRIM DENİZ
|
An Unscented Kalman Filter Design on Rotating Reference Frame For Induction Machines
2020 6th International Conference on Electric Power and Energy Conversion Systems (EPECS), istanbul/TÜRKİYE, 5 Ekim 2020
CEBECİ EMRE, YAŞA YUSUF
|
A Comprehensive Disturbing Effect Analysis of Multi-Sectional Rotor Slot Geometry for Induction Machines in Electrical Vehicles
IEEE Access, Vol. 9, Ocak 2021, s. 49590-49600, ISSN: 2169-3536
LORDOĞLU ABDULSAMED, GÜLBAHÇE MEHMET ONUR, KOCABAŞ DERYA AHMET
|
Diagnosis of Different Eccentricity Faults in Induction Motors Based on Electrical and Magnetic Signatures and Unbalanced Magnetic Pull
The Joint Conference 2019 International Conference on Optimization of Electrical and Electronic Equipment 2019 Intl Aegean Conference on Electrical Machines and Power Electronics (OPTIM- ACEMP),, 27 Ağustos 2019
SARIKAYA ALP,POLAT ABDULLAH,ERGENE LALE
|
Static dynamic and mixed eccentricity of induction motor
2015 IEEE 10th International Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives (SDEMPED), Guarda/PORTEKİZ, 1 Eylül 2015, s. 284-288
POLAT ABDULLAH,DÖNMEZER YASEMİN,ERGENE LALE
|
Polarization Effect on Iron Losses in Induction Motors
XVII International Conference on Electrical Machines ICEM 2006, CHANIA, GİRİT/YUNANİSTAN, 2 Eylül 2006
ERGENE LALE,SALON SHEPPARD J,DEGENEFF RC
|
Equivalent circuit parameter calculation of canned solid rotor induction motor using finite element method
ICEM 2004, 16th International Conference on Electrical Machines, Krakow/POLONYA, 5 Eylül 2004
ERGENE LALE,SALON SHEPPARD J
|
The analysis of the canned solid rotor induction motor
ICEM 2002 International Conference on Electrical Machines, Brugge/BELÇİKA, 25 Ağustos 2002, s. 75-77
ERGENE LALE,SALON SHEPPARD J
|
Short Circuit Analysis of Large Doubly Fed Induction Generators
2013 IEEE INTERNATIONAL ELECTRIC MACHINES & DRIVES CONFERENCE (IEMDC), 12 Mayıs 2013, s. 146-151
SHEPPARD J SALON,TAN PHAM,KAMİNSKİ C,ERGENE LALE
|
A Comprehensive Disturbing Effect Analysis of Multi-Sectional Rotor Slot Geometry for Induction Machines in Electrical Vehicles
IEEE Access, Vol. 9, No. 9, Mart 2021, s. 49590-49600, ISSN: 2169-3536
LORDOĞLU ABDULSAMED, GÜLBAHÇE MEHMET ONUR, KOCABAŞ DERYA AHMET
|
Novel Rotor Design for High Speed Solid Rotor Induction Machines
9th International Conference on Electrical and Electronics Engineering (ELECO), 26 Kasım 2015
MCGUİNESS DANİEL TUNC,GÜLBAHÇE MEHMET ONUR,KOCABAŞ DERYA AHMET
|