The use of 3D laser scanning technology in preservation of historical structures
13th Scientific-Technical Conference on Repair, conservation and strengthening of traditionally erected buildings and historic buildings (REMO 2009), Wroclaw/POLONYA, Vol. 26, No. 2009, 2 Aralık 2009, s. 659-669, ISSN: 0860-2395
VATAN KAPTAN MELTEM,SELBESOĞLU MAHMUT OĞUZ,BAYRAM BÜLENT
|
Micromachining of Si-wafer with femtosecond laser technology
FEN BİLİMLERİ ENSTİTÜSÜ, İSTANBUL TEKNİK ÜNİVERSİTESİ, 2011
ŞİRİN DİDEM SOFUOĞLU
|
Processing and Characterization of Hollow Glass-Filled Polyamide 12 Composites by Selective Laser Sintering Method
MATERIALS TECHNOLOGY, Vol. 37, Mart 2022, s. 213-223, ISSN: 1066-7857
SERHATLI İBRAHİM ERSİN, ÖZBAY KISASÖZ BURÇİN
|
Optimization of Laser Welding Seam Geometry Using Response Surface Methodology RSM
International Congress on Advances in Welding Science and Technology for Construction, Energy, and Transportation Systems (AWST 2011), 24 Ekim 2011
BOZAN ASLI, KURAL AYHAN, ÇANGAR HALUK
|
Numerical Analysis of Historic Structural Elements Using 3D Point Cloud Data
The Open Construction & Building Technology Journal, Vol. 10, Mayıs 2016, s. 233-245, ISSN: 1874-8368
ALMAÇ UMUT,POLAT PEKMEZCİ IŞIL,AHUNBAY METİN
|
Unexpected Broadband Visible Emission from Sol Gel Derived Yttrium Silicate Nanopowders under 803 5 nm Laser Excitation
American Physical Society New England Section Fall 2014 Regional Meeting at the Wentworth Institute of Technology, 2 Ekim 2014
ERDEM MURAT,ERYÜREK GÖNÜL,Dİ BARTOLO BALDASSARE
|
Effects of copper fillers on mechanical and electrical properties of selective laser sintered PA 12-Cu composites
Materials Technology, Vol. 37, Ağustos 2022, s. 1541-1553, ISSN: 1066-7857
ÖZBAY KISASÖZ BURÇİN, BEKEM AYLİN, SERHATLI İBRAHİM ERSİN, ÖZTÜRK SADULLAH, BULDUK M. ENES
|
Passively Q-switched and broadly tunable continuous-wave operations of a 2-μm Tm3+:Lu2O3 ceramic laser upconversion pumped at 1.064 μm
Optics & Laser Technology, Vol. 170, Mart 2024, ISSN: 0030-3992
KAMUN EYLÜL NİHAN,MOROVA YAĞIZ,SENNAROĞLU ALPHAN
|
Experimental investigation of laser operation in a depressed cladding Tm3+:KY3F10 waveguide laser near 2.3 µm and 1.9 µm
Infrared Physics & Technology, Vol. 150, Kasım 2025, ISSN: 1350-4495
İNCE FAİK DERYA,MOROVA YAĞIZ,MOROVA BERNA,TONELLİ MAURO,SENNAROĞLU ALPHAN
|
Experimental investigation of laser operation in a depressed cladding Tm3+:KY3F10 waveguide laser near 2.3 µm and 1.9 µm
Infrared Physics and Technology, Vol. 150, No. 105993, Kasım 2025, ISSN: 1350-4495
İNCE FAİK DERYA,MOROVA YAĞIZ,MOROVA BERNA,TONELLI MAURO,SENNAROĞLU ALPHAN
|
Microstructure-Corrosion behavior of Laser powder bed fusion - AlSi10Mg produced using synchronous scanning strategy (SSS)
Materials Science and Technology, Eylül 2025, ISSN: 0267-0836
ÖZER GÖKHAN,ÇALIŞKAN CEMAL İRFAN,KHAN HAMAID MAHMOOD,TÜTÜK İBRAHİM
|
INVESTIGATION OF THE EFFECT OF PROCESSES PARAMETERS ON LASER FADED DENIM FABRIC QUALITY
XVth International İzmir Textile and Apparel Symposium, İzmir/TÜRKİYE, 26 Ekim 2021
UYSALER TUNA,ALTAY PELİN,ÖZCAN GÜLAY
|
More sustainable denim fading process of two different indigo dyed denim fabrics with laser treatment
International Journal of Clothing Science and Technology, Şubat 2025, ISSN: e-ISSN: 1758-5953
UYSALER TUNA,ALTAY PELİN,ÖZCAN GÜLAY
|
Generation of gold nanoparticles by laser ablation in liquid using nanosecond pulsed non-diffracting beams
Optics & Laser Technology, Vol. 194, Şubat 2026, s. 114392, ISSN: 0030-3992
ÖZDEMİR BUSENUR,ESKİN ROZA MERCAN,MOROVA BERNA
|
Mechanical performance and ANNbased prediction of Co-Cr dental alloys with gyroid cellular structures produced by LPBF technology
Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Vol. 239, No. 9, Mayıs 2025, s. 3298-3316, ISSN: 0954-4062
ÇALIŞKAN CEMAL İRFAN,ŞAHİN MERYEM,KOCA ALİİHSAN,TARAKÇI GÜRKAN,OKBAZ ABDULKERİM,DALKILIÇ AHMET SELİM
|
β-cyclodextrin and calix[4]arene-functionalized thieno[3,2-b]thiophene based polymers as fluorescent ion sensors
Optics & Laser Technology, Vol. 177, Ekim 2024, ISSN: 0030-3992
HODA GOLFAMSADAT,İŞÇİ RECEP,FARAJI SHEIDA,ÖZTÜRK TURAN
|
Effects of particle damper design parameters on the damping performance of laser powder bed fused structures
The International Journal of Advanced Manufacturing Technology, Vol. 130, Ocak 2024, ISSN: 0268-3768
ÖZÇEVİK BİROL,SÖYLEMEZ EMRECAN,BEDİZ BEKİR,ŞİMŞEK UĞUR
|
Investigation of the Surface Roughness Effect on the Performance of an X-Band RF Filter Manufactured by Laser Powder Bed Fusion
IEEE Transactions on Components, Packaging and Manufacturing Technology, Vol. 14, Şubat 2024, ISSN: 2156-3950
ARSLAN AKIN,SÖYLEMEZ EMRECAN
|
Mechanical strength investigation of gyroid design parameters in titanium fixed partial denture frameworks manufactured by additive manufacturing
The International Journal of Advanced Manufacturing Technology, No. 136, Ocak 2025, s. 1617-1631, ISSN: 0268-3768
ÇALIŞKAN CEMAL İRFAN,KHAN HAMAID MAHMOOD,KOCA ALİİHSAN,ŞAHİN MERYEM,TARAKÇI GÜRKAN,SİVRİ BURAK
|
Investigation of direct metal laser sintering downskin parameters’ sagging effect on microchannels
The International Journal of Advanced Manufacturing Technology, Vol. 114, Haziran 2021, s. 2567-2575, ISSN: 0268-3768
ÇALIŞKAN CEMAL İRFAN, ÖZER GÖKHAN, COŞKUN MERT, KOÇ EBUBEKİR
|