Multifunctional CNTs Reinforced PEI Filaments for Fused Deposition Modeling
35th International Conference Of The Polymer Processing Society (PPS-35), İzmir/TÜRKİYE, 26 Ocak 2019
BOZKURT YUNUS EMRE,KAYNAN ÖZGE,YILDIZ ALPTEKİN,ÖZDEN YENİGÜN ELİF,CEBECİ HÜLYA
|
Direct 3D Printing of Strain Sensors onto 3D Woven Orthogonal Composite Structures: Evaluating Two Distinct Approaches for Sensor Performance
AIAA SCITECH 2024 Forum, Orlando/AMERİKA BİRLEŞİK DEVLETLERİ, 8 Ocak 2024
KARABAL MERVE,DİNÇER MELİSA,YÜKSEL RAMAZAN,AKYAZICI ZEYNEP NUR,YILDIZ ALPTEKİN,CEBECİ HÜLYA
|
Evaluation of Creep Behavior of 3D Printed CB/PEI Composites
3rd Additive Manufacturing Conference (AMCTURKEY 2022), AYDIN/TÜRKİYE, 6 Ekim 2022
KAYGINOK FULDEN,KARABAL MERVE,YILDIZ ALPTEKİN,EMANETOĞLU UĞUR,CEBECİ HÜLYA
|
Development of Multifunctional CNTs Reinforced PEI Filaments for Fused Deposition Modeling
AIAA SCITECH 2019 Forum, San Diego, California/AMERİKA BİRLEŞİK DEVLETLERİ, 7 Ocak 2019
KAYNAN ÖZGE,YILDIZ ALPTEKİN,BOZKURT YUNUS EMRE,ÖZDEN YENİGÜN ELİF,CEBECİ HÜLYA
|
Creep Modeling of 3D Printed Carbon Black Reinforced Polyetherimide Composites
International Conference on Recent Advances in Air and Space Technologies (RAST-2023), İstanbul/TÜRKİYE, 7 Haziran 2023
KARABAL MERVE, YILDIZ ALPTEKİN
|
Monitoring PEI Production Parameters on A Custom-made 3D Printer: An Insight into Physical and Mechanical Properties
International Journal of 3D Printing Technologies and Digital Industry, Vol. 8, No. 2, Ağustos 2024, s. 287-302, ISSN: 2602-3350
YILDIZ ALPTEKİN
|
Electrically conductive high-performance thermoplastic filaments for fused filament fabrication
Composite Structures, Vol. 237, No. 111930, Nisan 2020, ISSN: 0263-8223
KAYNAN ÖZGE,YILDIZ ALPTEKİN,BOZKURT YUNUS EMRE,ÖZDEN YENİGÜN ELİF,CEBECİ HÜLYA
|
Towards optimized carbon nanotubes (CNTs) reinforced polyetherimide (PEI) 3D printed structures: A comparative study on testing standards
Composite Structures, Vol. 296, Haziran 2022, ISSN: 0263-8223
YILDIZ ALPTEKİN, EMANETOĞLU UĞUR, ÖZDEN YENİGÜN ELİF, CEBECİ HÜLYA
|
Embedded Piezoresistive Sensors Printed by FFF for Aerospace Applications
AIAA SCITECH 2023 Forum, National Harbor/AMERİKA BİRLEŞİK DEVLETLERİ, 23 Ocak 2023
KARABAL MERVE,YÜKSEL RAMAZAN,KAYINOK FULDEN,YILDIZ ALPTEKİN,CEBECİ HÜLYA
|
Effect of scanning speed on the damage behaviour of SLM printed Inconel 625
BSSM 18th International Conference on Advances in Experimental Mechanics, Liverpool/İNGİLTERE, 3 Eylül 2024
YILDIZ RAŞİD AHMED,MALEKAN MOHAMMAD
|
Investigating temperature, stress, and residual stresses in laser powder bed fusion additive manufacturing of Inconel 625
Materials Today Communications, Vol. 41, Aralık 2024, s. 1-11, ISSN: 2352-4928
GHASEMİ ALİ,YILDIZ RAŞİD AHMED,MALEKAN MOHAMMAD
|
On the surface roughness of 316L stainless steel fabricated using L-PBF additive manufacturing
NORTRIB 2024, Copenhagen/DANİMARKA, Vol. 41, 11 Haziran 2024, s. 54-56
YILDIZ RAŞİD AHMED,ÖZDOĞAN CANSIN,MALEKAN MOHAMMAD
|
Eklemeli İmalat Destekli Hassas Döküm Yöntemi ile Alüminyum Alaşımlı Hücresel Bal Peteği ve Kafes Yapıların Tasarım, Üretim ve Karakterizasyonu
9. Uluslararası Alüminyum Sempozyumu, İstanbul/TÜRKİYE, 10 Ekim 2019
GÜLER FATİH,DÜNDAR KORAY,DURMAZ ENGİN,TURHAN LEVENT,KELEŞ ÖZGÜL
|
Binder Jet Additive Manufacturing Process Parameters Effect on Magnetic Performance of Fe-50Ni Alloy
MS&T22 (Materials Science and Technology) Conference, Pittsburgh/AMERİKA BİRLEŞİK DEVLETLERİ, 9 Ekim 2022
SÖYLEMEZ EMRECAN, SARI EMRE, DURNA EMRE, KIRIM BARIŞ
|
Multi-objective optimization of binder jet additive manufacturing of Co-Cr-Mo using machine learning
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol. 119, Ocak 2022, s. 18, ISSN: 0268-3768
ÖNLER RECEP, KOCA AHMET SELİM, KIRIM BARIŞ, SÖYLEMEZ EMRECAN
|
Modelling the Melt Pool of the Laser Sintered Ti6Al4V Layers with Goldak’s Double-Ellipsoidal Heat Source
29th Annual International Solid Freeform Fabrication Symposium, Austin/AMERİKA BİRLEŞİK DEVLETLERİ, 13 Ağustos 2018
SÖYLEMEZ EMRECAN
|
Understanding Process Parameters Strategy to Simulate the Thermal Models of Electron Beam Melting
Advances in Additive Manufacturing with Powder Metallurgy– AMPM22, Portland, Oregon/AMERİKA BİRLEŞİK DEVLETLERİ, 12 Haziran 2022
KIRIM BARIŞ, SÖYLEMEZ EMRECAN, TAN EVREN, YASA EVREN
|
Multi-objective Optimization of Binder Jetting Process Parameters for the Co-Cr-Mo Alloy
Materials Science Technology 2020, 2 Kasım 2020
KOCA AHMET SELİM,KIRIM BARIŞ,ÖNLER RECEP,SÖYLEMEZ EMRECAN
|
An Investigation on the Effect of Reuse and Recycling on Powder Characteristics in Electron Beam Melting
International Metallurgy and Materials Congress, İstanbul/TÜRKİYE, 10 Haziran 2021
YASA EVREN, KARAŞOĞLU MUTLU, TAN EVREN, GÜMÜŞ BERKAY, SÖYLEMEZ EMRECAN, AKTAŞ KUNTAY
|
On the Use of Inherent Strain Method for Modelling Electron Beam Melting
3rd International Conference on Electron Beam Additive Manufacturing, 5 Ekim 2020
TAN EVREN,YASA EVREN,GÜMÜŞ BERKAY,SÖYLEMEZ EMRECAN,AKTAŞ KUNTAY
|