Design and Construction of a Low Vibration Low Leakage Field Motor
2014 INTERNATIONAL CONFERENCE ON ELECTRICAL MACHINES (ICEM), 2 Eylül 2014, s. 464-469
SHEPPARD J SALON,ERGENE LALE
|
The effect of asymmetry on torque in permanent magnet motors
IEMDC 2001. IEEE International Electric Machines and Drives Conference (Cat. No.01EX485), 17 Haziran 2001, s. 208-217
SHEPPARD J SALON,SİVASUBRAMANİAM K,ERGENE LALE
|
3D transient magnetic modeling of braking torque in a rotating conducting disc
IEMDC 2001. IEEE International Electric Machines and Drives Conference (Cat. No.01EX485), Cambridge, MA, USA/AMERİKA BİRLEŞİK DEVLETLERİ, 17 Haziran 2001, s. 188-191
SHEPPARD J SALON, ERGENE LALE, WENDLİNG PHİLİPPE
|
The analysis of the canned solid rotor induction motor
ICEM 2002 International Conference on Electrical Machines, Brugge/BELÇİKA, 25 Ağustos 2002, s. 75-77
ERGENE LALE,SALON SHEPPARD J
|
Operational Risk Management of Loading-Unloading Operations at Ports
GIDBDERGI, Kasım 2021, s. 27-42, ISSN: 2564-758X
MENTEŞ AYHAN, AKYILDIZ HAKAN, KARA ERDİNÇ
|
A Comprehensive Disturbing Effect Analysis of Multi-Sectional Rotor Slot Geometry for Induction Machines in Electrical Vehicles
IEEE Access, Vol. 9, No. 9, Mart 2021, s. 49590-49600, ISSN: 2169-3536
LORDOĞLU ABDULSAMED, GÜLBAHÇE MEHMET ONUR, KOCABAŞ DERYA AHMET
|
Short Circuit Analysis of Large Doubly Fed Induction Generators
2013 IEEE INTERNATIONAL ELECTRIC MACHINES & DRIVES CONFERENCE (IEMDC), 12 Mayıs 2013, s. 146-151
SHEPPARD J SALON,TAN PHAM,KAMİNSKİ C,ERGENE LALE
|
Thermochemical Calculations and Experimental Investigations on Mo-Ni-B Alloy System Produced by Combustion Synthesis
XIII Int. Scientific Congress Machines, Technolоgies, Materials 2016, 16 Mart 2016, s. 28-29
DERİN CEVAT BORA,MOGHADDAM SEVIYNCH,YÜCEL ONURALP,SÖNMEZ MEHMET ŞEREF,BUĞDAYCI MEHMET,SEZEN MELTEM,BAKAN FERAY,SANIN VLADIMIR,ANDREEV DIMITRI
|
Relieved specific energy estimation using FLCM and PLCM linear rock cutting machines and comparison with rock properties
World Tunnel Congress 2019, 3 Mayıs 2019
BALCI CEMAL,ÇOPUR HANİFİ,TUMAÇ DENİZ,ÇOMAKLI RAMAZAN
|
TBM Performance Prediction using Laboratory Cutting Tests in Very Hard and Abrasive Rock Formations
International Conference on Tunnel Boring Machines in Difficult Grounds (TBM DiGs), Wuhan/ÇİN HALK CUMHURİYETİ, 21 Kasım 2017, s. 1-11
BİLGİN NUH,ÇOPUR HANİFİ,BALCI CEMAL,TUMAÇ DENİZ
|
Investigation of the Effect of Textural Properties towards Predicting Sawing Performance of Diamond Wire Machines
EUROCK 2016, Rock Mechanics & Rock Engineering: From the Past to the Future, Vol. 1, 29 Ağustos 2016, s. 211-215
TUMAÇ DENİZ,AVUNDUK EMRE,ÇOPUR HANİFİ,BALCI CEMAL,ER SELMAN
|
Determining the Effect of Texture Coefficient on Performance of Diamond Wire Machines
9th Asian Rock Mechanics Symposium-ARMS9, Bali/ENDONEZYA, No. 8 pages, 18 Ekim 2016
TUMAÇ DENİZ,ER SELMAN,AVUNDUK EMRE,BAŞYİĞİT MİKAİL,ÇOPUR HANİFİ,BALCI CEMAL
|
Physico Mechanical Property Tests Towards Performance Prediction of Chain Saw Machines
The Fifth Thailand Symposium on Rock Mechanics- Thairock 2015, Bangkok/TAYLAND, Vol. 381, No. 387, 22 Ocak 2015
TUMAÇ DENİZ,AVUNDUK EMRE,BAŞYİĞİT MİKAİL,ÇOPUR HANİFİ,BALCI CEMAL,SELMAN ER
|
Development of Performance Prediction Models for Block-Cutting Machines (S/T) with Circular Saws Used in Natural Stone Factories
26th International Symposium on Mine Planning Equipment Selection (MPES 2017), Lulea/İSVEÇ, 29 Ağustos 2017, s. 239-244
TUMAÇ DENİZ,CEVİM KAMİL CENGİZ,SHATERPOUR MAMAGHANİ AYDIN
|
Thermal and Mechanical Analysis of PM Assisted Synchronous Reluctance Motor for Washing Machines
ELECO 2017 10th International Conference on Electrical and Electronics Engineering, Bursa/TÜRKİYE, 30 Kasım 2017
LİRİDON XHELADİNİ,TAP ALPER,İMERYÜZ MURAT,AŞAN TAŞDEMİR,YILMAZ MURAT,ERGENE LALE
|
The Effect of Mechanical Properties on Performance of Diamond Wire Machines
The Fifth Thailand Symposium on Rock Mechanics- Thairock 2015, bangkok/TAYLAND, Vol. 389, No. 395, 22 Ocak 2015
TUMAÇ DENİZ,AVUNDUK EMRE,BAŞYİĞİT MİKAİL,ÇOPUR HANİFİ,SELMAN ER,BALCI CEMAL
|
Experimental Comparison of Single and Double Scroll Cutting Patterns by Using Chisel Cutting Tools of chain Saw Machines
Rock Characterisation, Modelling and Engineering Design Methods - Sinorock2013, 18 Haziran 2013
AVUNDUK E., TUMAC D., COPUR H., BALCİ C, BİLGİN N.,
|
Full Scale Linear Cutting tests towords Performance Prediction of Chain Saw Machines
Proc. of the 20th International Mining Congress and Exhibition- IMCET 2007, 6 Haziran 2007, s. 161-169
ÇOPUR HANİFİ,BALCI CEMAL,BİLGİN NUH,TUMAÇ DENİZ,İLKE DÜZYOL
|
Diagnosis of Different Eccentricity Faults in Induction Motors Based on Electrical and Magnetic Signatures and Unbalanced Magnetic Pull
The Joint Conference 2019 International Conference on Optimization of Electrical and Electronic Equipment 2019 Intl Aegean Conference on Electrical Machines and Power Electronics (OPTIM- ACEMP),, 27 Ağustos 2019
SARIKAYA ALP,POLAT ABDULLAH,ERGENE LALE
|
MPPT Based Adaptive Control Algorithm for Small Scale Wind Energy Conversion Systems with PMSG
The Joint Conference 2019 International Conference on Optimization of Electrical and Electronic Equipment 2019 Intl Aegean Conference on Electrical Machines and Power Electronics (OPTIM- ACEMP), İSTANBUL/TÜRKİYE, 27 Ağustos 2019
AKKAYA MUHAMMED CİHAD,POLAT ABDULLAH,ERGENE LALE
|