An Efficient Ensemble Deep Learning Approach for Semantic Point Cloud Segmentation Based on 3D Geometric Features and Range Images
SENSORS, Vol. 22, No. 16, Ağustos 2022, s. 6210, ISSN: 1424-8220
ATİK MUHAMMED ENES,DURAN ZAİDE
|
A 3D Printed Rotational MEMS Actuator for Scanning Capsule Endoscopy
Optical Microsystems and Nanophotonics Conference 2022, çevrimiçi/İSRAİL, 12 Eylül 2022
TEKİN ENGİNCAN, FERHANOĞLU ONUR, YELTEN MUSTAFA BERKE, ERTEN AHMET CAN
|
Effect of Weaving Patterns on the Wettability and Mechanical Properties of 3D Woven I-Beam Composites
20th European Conference on Composite Materials (ECCM20), Lausanne/İSVİÇRE, 26 Haziran 2022
KARCI EMİR, VURAL MUHAMMED ALİ, DİNÇER MELİSA, ÇELİKTÜRK MERT, ŞAHİN İBRAHİM HALİL, YATKIN BURAK, EMRE ÇAĞIN, ÖZKENDİRCİ BAŞAK, ÖZDEN YENİGÜN ELİF, CEBECİ HÜLYA
|
An Upcycling Design Model for Pre-Consumer Denim Waste
ICONTEX 2022, 18 Mayıs 2022
NERGİS FATMA BANU, CANDAN CEVZA, ÇİKOT NAZLI, AYIK BERİL, ÇÖL M
|
Establishing Synergistic Effects of BN and CNT on the Thermal Conductivity of Peek Filaments for 3D Printing
20th European Conference on Composite Materials (ECCM20), Lausanne/İSVİÇRE, 26 Haziran 2022
BOZKURT YUNUS EMRE, YILDIZ ALPTEKİN, EMANETOĞLU UĞUR, CEBECİ HÜLYA
|
3D modeling of historical theodolite with photogrammetric techniques and accuracy analysis
Cultural Heritage and Science, Vol. 3, No. 1, Temmuz 2022, s. 25-29, ISSN: 2757-9050
ATİK MUHAMMED ENES, DURAN ZAİDE, YANALAK MUSTAFA, ŞEKER DURSUN ZAFER
|
A novel 3D scan-based optical method for analyzing lines drawn at different pen pressure
Forensic Science International, Vol. 338, Eylül 2022, ISSN: 0379-0738
AŞICIOĞLU FARUK, ŞEN YILMAZ AYŞEGÜL, KİNDER JAN DE, PEKACAR ILGIM, GELİR ALİ
|
Influence Of TEX Linear Density On Mechanical Properties of 3D Woven I-Beam Composites
The 20th European Conference on Composite Materials, Lausanne/İSVİÇRE, 26 Haziran 2022
DİNÇER MELİSA, KARCI EMİR, VURAL MUHAMMED ALİ, ÇELİKTÜRK MERT, ŞAHİN İBRAHİM HALİL, YATKIN BURAK, EMRE ÇAĞIN, ÖZKENDİRCİ BAŞAK, ÖZDEN YENİGÜN ELİF, CEBECİ HÜLYA
|
Optimization of methacrylated gelatin /layered double hydroxides nanocomposite cell‐laden hydrogel bioinks with high printability for 3D extrusion bioprinting
Wiley, Vol. 111, Şubat 2023, ISSN: 1549-3296
ALARÇİN EMİNE, İZBUDAK BURÇİN, YUCE ERARSLAN ELİF, DOMİNGO SHERİF, TUTAR RUMEYSA, TİTİ KARİMAN, KOCAAĞA AYŞE BANU, GÜNER FATMA SENİHA, BAL ÖZTÜRK AYÇA
|
A 3D-printed spiral actuator for focus adjustment in circumferential scanning endomicroscopy
Journal of Micromechanics and Microengineering, Vol. 33, Ocak 2023, ISSN: 0960-1317
SALAHELDİN İSRA, GÜRCÜOĞLU OĞUZ, ÖZDEMİR ÖZGÜR, YELTEN MUSTAFA BERKE, FERHANOĞLU ONUR
|
3D-printed actuator-based beam-steering approach for improved physical layer security in visible light communication
Applied Optics, Vol. 61, Haziran 2022, ISSN: 1559-128X
ERDEM MEHMET CAN, GÜRCÜOĞLU OĞUZ, PANAYIRCI ERDAL, KARABULUT KURT GÜNEŞ ZEYNEP, FERHANOĞLU ONUR
|
Evaluation of Creep Behavior of 3D Printed CB/PEI Composites
3rd Additive Manufacturing Conference (AMCTURKEY 2022), AYDIN/TÜRKİYE, 6 Ekim 2022
KAYGINOK FULDEN,KARABAL MERVE,YILDIZ ALPTEKİN,EMANETOĞLU UĞUR,CEBECİ HÜLYA
|
3D Textile Composite Beams with a New Weaving Pattern
8th Edition of the International Conference on Intelligent Textiles and Mass Customization, ITMC 2022, Montreal/KANADA, 19 Eylül 2022
DİNÇER MELİSA, KARCI EMİR, ÇELİKTÜRK MERT, GÖK ECE ZÜLAL, ÖZKENDİRCİ BAŞAK, ÖZDEN YENİGÜN ELİF, CEBECİ HÜLYA
|
Nanocomposite Bioinks Based on Agarose and 2D Nanosilicates with Tunable Flow Properties and Bioactivity for 3D Bioprinting
ACS APPLIED BIO MATERIALS, Vol. 2, No. 2, Ocak 2019, s. 11, ISSN: 2576-6422
NADERNEZHAD ALİ, ÇALIŞKAN ÖZÜM, TOPUZ FUAT, AFGHAH FERDOWS, ERMAN MEHMET BATU, KOÇ BAHATTİN
|
Towards optimized carbon nanotubes (CNTs) reinforced polyetherimide (PEI) 3D printed structures: A comparative study on testing standards
Composite Structures, Vol. 296, Eylül 2022, ISSN: 0263-8223
YILDIZ ALPTEKİN, EMANETOĞLU UĞUR, ÖZDEN YENİGÜN ELİF, CEBECİ HÜLYA
|
A 3D Printed Rotational MEMS Actuator for Scanning Capsule Endoscopy
2022 INTERNATIONAL CONFERENCE ON OPTICAL MEMS AND NANOPHOTONICS (OMN), 12 Eylül 2022
TEKİN ENGİNCAN, ERTEN AHMET CAN, YELTEN MUSTAFA BERKE, FERHANOĞLU ONUR
|
Hardness, friction and wear characteristics of 3D-printed PLA polymer
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY, Vol. 235, No. 8, Ağustos 2021, s. 1590-1598, ISSN: 1350-6501
ZHIANI HERVAN SAHAR, ALTINKAYNAK ATAKAN, PARLAR ZEYNEP
|
Dimensional accuracy of FDM-printed polymer parts
RAPID PROTOTYPING JOURNAL, Vol. 26, No. 2, Şubat 2020, s. 288-298, ISSN: 1355-2546
AKBAŞ OĞUZHAN EMRE,HIRA ONUR,HERVAN SAHAR ZHİANİ,SAMANKAN SHAHRAD,ALTINKAYNAK ATAKAN
|
Melting in a Single Screw Extruder: Experiments and 3D Finite Element Simulations
INTERNATIONAL POLYMER PROCESSING, Vol. 26, No. 2, Mayıs 2011, s. 182-196, ISSN: 0930-777X
ALTINKAYNAK ATAKAN,GUPTA MAHESH,SPALDİNG MARK A,CRABTREE SAM L
|
Accuracy improvement of 3D location measurement of ships using stereo vision
13th Congress of Intl. Maritime Assoc. of Mediterranean IMAM 2009, İstanbul/TÜRKİYE, 12 Ekim 2009, s. 1073-1078
KOÇAK GAZİ, YAMAMOTO SHİGEHİRO
|