PARAMETRIC ANALYSIS FOR HOLLOW SHAFT USED AT ELECTRIC MOTORS WITH ROTOR COOLING
Lisansüstü Eğitim Enstitüsü, İstanbul Teknik Üniversitesi, 2024
BURCU KANAY
|
Development of a phase-changing material additive radiant heating-cooling panel for energy efficiency in buildings
Fen Bilimleri Enstitüsü, Yıldız Teknik Üniversitesi, 2023
MUHAMMED SALİH
|
Effect of Cooling Methods on Weld Quality in Friction Stir Welding of AA2024-T351
Graduate School, The Petroleum Institute, 2016
MARVENE XAVİER FERNANDES
|
INVESTIGATION OF THE PARAMETERS AFFECTING THE COOLING PERFORMANCE OF A PIEZOELECTRIC ACTUATED BEAM USED AS A FAN
Lisansüstü Eğitim Enstitüsü, İstanbul Teknik Üniversitesi, 2024
BURAK ÖZTÜRK
|
PERFORMANCE INVESTIGATION OF COLD PLATE WITH RECTANGULAR CHANNELS USED FOR COOLING OF IGBT MODULES
Lisansüstü Eğitim Enstitüsü, İstanbul Teknik Üniversitesi, 2024
MUHAMMED ENES ÖNGEN
|
Development of heat rejection prediction methodology for selection of cooling elements in diesel engines
Lisansüstü Eğitim Enstitüsü, İstanbul Teknik Üniversitesi, 2022
EMRE EPGÜZEL
|
Response of a hyperbolic cooling tower under seismic excitations and wind load
Lisansüstü Eğitim Enstitüsü, İstanbul Teknik Üniversitesi, 2022
MUTZ ALZOUABI
|
Position optimization of film cooling holes on a squealer turbine blade tip
Fen Bilimleri Enstitüsü, Marmara Üniversitesi, 2019
FARUK YILDIZ
|
Planning and stochastic evaluation of combined cooling heat and power systems under uncertainty
Enerji Enstitüsü, İstanbul Teknik Üniversitesi, 2019
İBRAHİM ERSÖZ
|
Design, fabrication, and experimental evaluation of microchannel heat sinks in CPU cooling
Fen Bilimleri Enstitüsü, Orta Doğu Teknik Üniversitesi, 2010
AZİZ KOYUNCUOĞLU
|
Thermoelectric cooling of a pulsed mode 1064 nm diode pumped Nd: Yag laser
Fen Bilimleri Enstitüsü, Orta Doğu Teknik Üniversitesi, 2010
YÜKSEL YÜKSEL
|
Optimizing heat exchanger parameters of a Joule-Thomson cryogenic cooler to improve the cooling performance
Fen Bilimleri Enstitüsü, Orta Doğu Teknik Üniversitesi, 2018
MURAT BAKİ
|
Characterization of the Velocity and Heat Transfer Fields in an Internal Cooling Channel With High Blockage Ratio
Volume 3: Turbo Expo 2002, Parts A and B, Amsterdam/HOLLANDA, 3 Haziran 2002
CASARSA LUCA,ÇAKAN MURAT,ARTS TONY
|
Low Energy Cooling Of Rooms With Displacement Ventilation
International Symposium on Transient Convective Heat and Mass Transfer in Single and Two Phase Flows, Çeşme, Turkey, No. ., 17 Ağustos 2003
MISIRLIOĞLU AYDIN,GULCAT ULGEN
|
An experimental and computational approach to the heat transfer mechanism in the cooling channel of a texturing process
International Communications in Heat and Mass Transfer, Vol. 31, No. 8, Kasım 2004, s. 1155-1164, ISSN: 07351933
ONBAŞIOĞLU SEYHAN,KARAKAŞ HALE,DAYIOĞLU HABİP
|
Metamorphism and diachronous cooling in a contractional orogen the Strandja Massif NW Turkey
Geological Magazine, Vol. 148, No. 04, Temmuz 2011, s. 580-596, ISSN: 0016-7568
SUNAL GÜRSEL,MUHARREM SATIR,BORİS NATAL'IN,TOPUZ GÜLTEKİN,OLİVER VONDERSCHMIDT
|
Evaluation of Building Envelope Performance Constructed with Phase-Change Materials in Terms of Heating and Cooling Energy Consumption
The Rehva European HVAC Journal, Vol. 57, No. 6, Ocak 2020, s. 38-44, ISSN: 1307-3729
KÖSE EDA,MANİOĞLU GÜLTEN
|
Quantification and Analysis of the Charge Cooling Effect of Methanol in a Compression Ignition Engine Utilizing PPC Strategy
Volume 1: Large Bore Engines Fuels Advanced Combustion, San Diego, California, USA/AMERİKA BİRLEŞİK DEVLETLERİ, 4 Kasım 2018
SHAMUN SAM,ZİNCİR BURAK,SHUKLA PRAVESH,VALLADOLİD PABLO GARCİA,VERHELST SEBASTİAN,TUNER MARTİN
|
The Texture of The Opaque Component from The Cooling Energy Conservation Viewpoint
IEEES 2003, İZMİR/TÜRKİYE, 13 Temmuz 2003, s. 479-484
AKŞİT ŞULE FİLİZ,KOÇLAR ORAL GÜL
|
Energy and economic assessment of major free cooling retrofits for data centersin Turkey
Turkish Journal of Electrical Engineering and Computer Sciences, Vol. 27, No. 3, Mayıs 2019, s. 2197-2212, ISSN: 1300-0632
GÖZCÜ OZAN, ERDEN HAMZA SALİH
|