Comparative Study of Surface Roughness in Upskin and Downskin Regions of Conformal Cooling Channel Sections Fabricated with AlSi10Mg, Ti64, 316L in AM-LPBF
Journal of Advanced Research in Natural and Applied Sciences, Vol. 11, No. 2, Haziran 2025, s. 117-131, ISSN: 2757-5195
ÇALIŞKAN CEMAL İRFAN
|
Which is more effective for protein adsorption surface roughness surface wettability or swelling Case study of polyurethane films prepared from castor oil and poly ethylene glycol
Polymer International, 2013
AKKAŞ TUĞBA,ÇITAK CANSU,SİRKECİOĞLU AHMET,GÜNER FATMA SENİHA
|
Investigation of the Surface Roughness Effect on the Performance of an X-Band RF Filter Manufactured by Laser Powder Bed Fusion
IEEE Transactions on Components, Packaging and Manufacturing Technology, Vol. 14, Şubat 2024, ISSN: 2156-3950
ARSLAN AKIN,SÖYLEMEZ EMRECAN
|
Predictive modelling of surface roughness and residual stress induced by milling of hot forged and heat treated AA7075
The International Journal of Advanced Manufacturing Technology, Kasım 2025, ISSN: 0268-3768
TOK GÖRKEM,DİNÇER AMMAR TARIK,KUZU ALİ TANER,BAKKAL MUSTAFA
|
Boundary layer, drag and surface roughness characteristics of nanostructured coatings on an axy-symmetrical slender body tested in a cavitation tunnel
15. ICMCF (International Congress on Marine Corrosion and Fouling), Newcastle Upon Tyne/İNGİLTERE, 25 Temmuz 2010, s. 4
ÜNAL UĞUR ORAL,ERBAŞ ÖZ BURCU,POLİTİS GEORGE,ATLAR MEHMET
|
Numerical Simulation of the Surface Roughness Effect on Flow Boiling in Microchannels
Int. Symp. on Convective Heat and Mass Transfer, 8 Haziran 2014
JAFARI RAHIM,OKUTUCU ÖZYURT HANİFE TUBA
|
Effects of fractal surface roughness and lithology on single and multiphase flow in a single fracture An experimental investigation
International Journal of Multiphase Flow, Vol. 68, 2015, ISSN: 0301-9322
BABADAĞLI TAYFUN,REN XİAOJUAN,DEVELİ KAYHAN
|
A numerical algorithm to determine straightness error surface roughness and waviness measured using a fiber optic interferometer
Optics and Laser Technology, Kasım 2016
YILDIRIM MURAT,OKUTUCU ÖZYURT HANİFE TUBA,DURSUNKAYA ZAFER
|
Determination of Earth Surface Roughness through Surface Impedance Modeling
The 10th Specialist Meeting on Microwave Radiometry And Remote Sensing Of The Environment, 2008
EMRE KILIÇ, MEHMET ÇAYÖREN, GÜL SEDA ÜNAL
|
Determination of Tool Wear, Surface Roughness and Cutting Temperature Parameters in Milling St37 Steel
7th International Conference on Engineering Technologies (ICENTE), KONYA/TÜRKİYE, 23 Kasım 2023, s. 233-237
DEĞİRMENCİ ÜNAL, USCA ÜSAME ALİ, ŞAP SERHAT
|
Experimental investigation of surface roughness effects on the flow boiling of R134a in microchannels
Experimental Thermal and Fluid Science, Aralık 2016
JAFARI RAHIM,OKUTUCU ÖZYURT HANİFE TUBA,BAYER ÖZGÜR,ÜNVER HAKKI ÖZGÜR
|
Prediction of maximum spreading factor after drop impact: Development of a novel semi-analytical model incorporating effect of surface roughness
Colloid and Interface Science Communications, Vol. 41, Ocak 2021, ISSN: 2215-0382
BUDAKLI METE
|
Modeling and analysis of surface roughness of microchannels produced by μ-WEDM using an ANN and Taguchi method
Journal of Mechanical Science and Technology, Vol. 31, Kasım 2017, s. 5447-5457, ISSN: 1738-494X
JAFARI RAHIM,KAHYA MÜGE,NADİMİ BAVİL OLİAEİ SAMAD,ÜNVER HAKKI ÖZGÜR,OKUTUCU ÖZYURT HANİFE TUBA
|
The influence of steam cleaning procedures on the surface roughness of commonly used type III dental stone for the fabrication of removable dentures
Gerodontology, Vol. 30, No. 3, Eylül 2013, s. 171-175, ISSN: 07340664
ÇİLİNGİR AHMET ALTUĞ,GEÇKİLİ ONUR,PARLAR ZEYNEP,GENÇEL BURÇ İHSAN,BOZDAĞ SÜREYYA ERGÜN,TEMİZ VEDAT
|
New 3D Scanner and Software for Digitizing and Quantification of Discontinuity Surface Roughness
6th International Conference on Computer Applications in Minerals Industry (CAMI 2016), 5 Ekim 2016
ÖNSEL İBRAHİM EMRE,ÖZTÜRK CÜNEYT ATİLLA
|
Predictive modelling of surface roughness and residual stress induced by milling of hot forged and heat treated AA7075
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Kasım 2025, ISSN: 0268-3768
TOK GÖRKEM,DİNÇER AMMAR TARIK,KUZU ALİ TANER,BAKKAL MUSTAFA
|
Influence of surface roughness of dune bedforms on flow and turbulence characteristics
International Journal of Sediment Research, Vol. 35, No. 6, Aralık 2020, s. 666-668, ISSN: 1001-6279
KIRCA VEYSEL ŞADAN ÖZGÜR, SAGHEBİAN SEYED MAHDİ, ROUSHANGAR KİYOUMARS, YAĞCI ORAL
|
The influence of steam cleaning procedures on the surface roughness of commonly used type III dental stone for the fabrication of removable dentures
Gerodontology, Vol. 30, No. 3, Eylül 2013, s. 171-175, ISSN: 07340664
TEMİZ VEDAT,BOZDAĞ SÜREYYA ERGÜN,PARLAR ZEYNEP,GEÇKİLİ ONUR,ÇİLİNGİR AHMET ALTUĞ,GENÇEL BURÇ İHSAN
|
Effects of the Cutting Fluid Types and Cutting Parameters on Surface Roughness and Thrust Force
Proceedings of the World Congress on Engineering WCE, Londra/İNGİLTERE, 30 Haziran 2010
ŞIK EMRAH, DEMİRBAŞ ERHAN, ÖZÇELİK BABÜR, KURAM EMEL
|
The Effect of Surface Roughness and Shaft Speed on the Frictional Characteristics of Radial Lip Seals
10th Biennial Conf. On Engineering Design and Analysis, ASME International, Proceedings of ASME 2010, İstanbul/TÜRKİYE, 7 Temmuz 2010
TEMİZ VEDAT
|