An approach for the chest tube detection in chest radiographs using convolutional neural network
Bilişim Enstitüsü, İstanbul Teknik Üniversitesi, 2015
CEM AHMET MERCAN
|
In tube evaporation of carbon dioxide with and without oil
Fen Bilimleri Enstitüsü, İstanbul Teknik Üniversitesi, 2012
NUR PEHLİVANOĞLU DÖNMEZ
|
Development of combustion tube experimental setup for underground coal gasification
Lisansüstü Eğitim Enstitüsü, İstanbul Teknik Üniversitesi, 2021
İSMAİL HAKKI SARIÇAM
|
Analysis of tube spinning process
Lisansüstü Eğitim Enstitüsü, İstanbul Teknik Üniversitesi, 2021
EREN CAN SARIYARLIOĞLU
|
Heat transfer enhancement in fin and tube heat exchangers by introducing perforations on the fins
Lisansüstü Eğitim Enstitüsü, İstanbul Teknik Üniversitesi, 2024
HARUN DENİZLİ
|
Experimental investigation of heat transfer performance of fin-and-tube heat exchangers for dry and wet conditions
Lisansüstü Eğitim Enstitüsü, İstanbul Teknik Üniversitesi, 2024
OĞUZ KILIÇ
|
Improving Seismic Performance of RC Structures with
Innovative TnT BRBs: A Shake Table and Finite
Element Investigation
Applied Sciences, Vol. 15, Ocak 2025, s. 3844, ISSN: 2076-3417
OYGUÇ EMİNE EVRİM,OYGUÇ REŞAT ATALAY,ŞEKER ONUR,HAYIR ABDUL,SHEN JAY,AKBAŞ BÜLENT
|
A novel analytical method for the determination of cadmium in sorrel and rocket plants at ultratrace levels: Magnetic chitosan hydrogels based solid phase microextraction-slotted quartz tube-flame atomic absorption spectrophotometry
MICROCHEMICAL JOURNAL, Vol. 143, Aralık 2018, s. 393-399, ISSN: 0026-265X
ÖZTÜRK ELİF,MALTEPE ESRA,BAKIRDERE SEZGİN
|
Chitosan magnetic hydrogel based ligandless magnetic solid phase extraction for the accurate and sensitive determination of thallium by slotted-quartz tube flame atomic absorption spectrophotometry with matrix matching calibration strategy
MICROCHEMICAL JOURNAL, Vol. 158, Kasım 2020, s. 105231, ISSN: 0026-265X
MALTEPE ESRA,ÖZTÜRK ER ELİF,BAKIRDERE SEZGİN
|
Preconcentration of tellurium using magnetic hydrogel-assisted dispersive solid-phase extraction and its determination by slotted quartz tube-flame atomic absorption spectrophotometry
Chemical Papers, Vol. 75, No. 8, Ağustos 2021, s. 4261-4267, ISSN: 2585-7290
DEMİR CANSU,ÖZTÜRK ER ELİF,KARTOĞLU BEDRİHAN,ATSEVER NİHAN,YAĞCİ ÖZLEM,ÖNER MİRAY,BAKIRDERE SEZGİN
|
The Effect of Welding Parameters to MIG Welding of an Aluminum Alloy Tube
International Conference WELDS 2005 “Design, Testing, Assesment and Safety of High Temperature Welded Structures”, Geesthact (Hamburg)/ALMANYA
NOYAN A.U., MİNDİVAN H., CİMENOGLU H., KAYALI E.S
|
Design optimization of a shell-and-tube heat exchanger with novel three-zonal baffle by using CFD and taguchi method
International Journal of Thermal Sciences, Vol. 155, Eylül 2020, s. 106417, ISSN: 1290-0729
BİÇER NİHAT,ENGİN TAHSİN,YAŞAR HALİT,BÜYÜKKAYA EKREM,AYDIN AHMET,TOPUZ ADNAN
|
Design optimization of a shell-and-tube heat exchanger with novel three-zonal baffle by using CFD and taguchi method
International Journal of Thermal Sciences, Vol. 155, No. 106417, Ocak 2020, s. 1-11, ISSN: 1290-0729
BİÇER NİHAT,ENGİN TAHSİN,YAŞAR HALİT,BÜYÜKKAYA EKREM,AYDIN AHMET,TOPUZ ADNAN
|
Optimization and CFD analysis of a shell-and-tube heat exchanger with a multi segmental baffle
Thermal Science, No. 26, Aralık 2022, s. 1-12, ISSN: 0354-9836
AYDIN AHMET,YAŞAR HALİT,ENGİN TAHSİN,BÜYÜKKAYA EKREM
|
Experimental analysis for heat transfer of nanofluid with wire coil turbulators in a concentric tube heat exchanger
Results in Physics, Vol. 9, Haziran 2018, s. 376-389, ISSN: 22113797
AKYÜREK EDA FEYZA,GELİŞ KADİR,ŞAHİN BAYRAM,MANAY EYÜPHAN
|
Dewatering of Golden Horn sludge with geotextile tube and determination of optimum operating conditions: A novel approach
Marine Georesources & Geotechnology, Vol. 40, No. 7, Temmuz 2022, s. 782-794, ISSN: 1064-119X
KARADOĞAN ÜMİT,ÇEVİKBİLEN GÖKHAN,KORKUT SEVDE,PAŞAOĞLU MEHMET EMİN,TEYMÜR BERRAK
|
Performance improvement methods for quartz tube solid particle fluidized bed solar receiver
Journal of Thermal Engineering, No. 4, Temmuz 2022, s. 477-489, ISSN: 2148-7847
ŞENTÜRK LÜLE SENEM, BÖLÜK MEHMET
|
effects of mandrel shank positionS and the gap valueS between the mandrel balls and the tube on the thinning and the ovality IN Rotary draw bending
31st International Conference on Metallurgy and Materials, 18 Mayıs 2022, s. 221-226, ISSN: 2694-9296
OZCAN BAHADIR, EVİS ZAFER, ÖZTÜRK FAHRETTİN
|
An experimental study on carbon monoxide emission reduction at a fire tube water heater
Applied Thermal Engineering, Vol. 30, No. 17-18, Aralık 2010, s. 2658-2662, ISSN: 1359-4311
AYDİN OZER,BÖKE YAKUP ERHAN
|
Numerical investigation on the effects of different heating systems and coil tube arrangements on the free convection heat transfer in a confined space filled with high viscosity fluid
Thermal Science and Engineering Progress, Vol. 26, Ekim 2021, s. 1-19, ISSN: 2451-9049
ŞAHİN KORAY, ERGİN SELMA
|