Numerical and experimental investigation on the crushing behaviour of auxetic lattice cells produced with additive manufacturing techniques
FEN BİLİMLERİ ENSTİTÜSÜ, İSTANBUL TEKNİK ÜNİVERSİTESİ, 2020
KADİR GÜNAYDIN
|
TOPOLOGY OPTIMIZATION OF STABILIZED ANTENNA PLATFORM FOR ADDITIVE MANUFACTURING
LİSANSÜSTÜ EĞİTİM ENSTİTÜSÜ, İSTANBUL TEKNİK ÜNİVERSİTESİ, 2021
EMRE ESEN
|
Improving mechanical properties of additive manufacturing products using novel infill and slicing methods
LİSANSÜSTÜ EĞİTİM ENSTİTÜSÜ, İSTANBUL TEKNİK ÜNİVERSİTESİ, 2023
ARASH ARMANFAR
|
Fluid flow-inspired curvature-aware print-paths from hexahedral meshes for additive manufacturing
LİSANSÜSTÜ EĞİTİM ENSTİTÜSÜ, İSTANBUL TEKNİK ÜNİVERSİTESİ, 2022
SERHAT ÇAM
|
Investigation of the microstructural and mechanical properties of Al/TiB2 composites produced by cold spray additive manufacturing
LİSANSÜSTÜ EĞİTİM ENSTİTÜSÜ, İSTANBUL TEKNİK ÜNİVERSİTESİ, 2022
NERGİZ İLHAMİ MERT
|
Geometry-aware support design for additive manufacturing
LİSANSÜSTÜ EĞİTİM ENSTİTÜSÜ, İSTANBUL TEKNİK ÜNİVERSİTESİ, 2025
EMRE GÜNAYDIN
|
Pack aluminizing of inconel 718 superalloy produced by cold spray additive manufacturing
LİSANSÜSTÜ EĞİTİM ENSTİTÜSÜ, İSTANBUL TEKNİK ÜNİVERSİTESİ, 2025
SERRA BAYRAM
|
Numerical modeling of sintering in binder jetting additive manufacturing process
LİSANSÜSTÜ EĞİTİM ENSTİTÜSÜ, İSTANBUL TEKNİK ÜNİVERSİTESİ, 2025
MEHMET FATİH YALÇIN
|
Design for additive manufacturing for small-volume production: A case study
LİSANSÜSTÜ EĞİTİM ENSTİTÜSÜ, İSTANBUL TEKNİK ÜNİVERSİTESİ, 2024
AHMET FURKAN KELEŞ
|
Verification study of wire arc additive manufacturing of titanium alloy TI6AL4V
LİSANSÜSTÜ EĞİTİM ENSTİTÜSÜ, İSTANBUL TEKNİK ÜNİVERSİTESİ, 2024
GANİ MELİK ÖNDER
|
Numerical analysis of additive manufacturing of maraging steel
FEN BİLİMLERİ ENSTİTÜSÜ, İSTANBUL TEKNİK ÜNİVERSİTESİ, 2018
MOBIN MAJEED
|
Efficient Design Optimization of Variable Density Hexagonal Cellular Structure by Additive Manufacturing Theory and Validation
Journal of Manufacturing Science and Engineering, Vol. 137, No. 2, Nisan 2015, s. 21004, ISSN: 1087-1357
ZHANG PU,TOMAN JAKUB,YU YIQI,BIYIKLI EMRE,KIRCA MESUT,CHMIELUS MARKUS,TO ALBERT CHIFU
|
Sustainable additive manufacturing supply chains with a plithogenic stakeholder analysis: Waste reduction through digital transformation
CIRP Journal of Manufacturing Science and Technology, Vol. 55, Aralık 2024, s. 261-271, ISSN: 1755-5817
KARADAYI USTA SALİHA
|
Investigation of manufacturability and efficiency of micro channels with different geometries produced by direct metal laser sintering
The International Journal of Advanced Manufacturing Technology, Vol. 117, Aralık 2021, s. 3805-3817, ISSN: 0268-3768
ÇALIŞKAN CEMAL İRFAN, COŞKUN MERT, ÖZER GÖKHAN, KOÇ EBUBEKİR, VURKIR TURGUR AZER, YÖRDEM GÖKAY
|
Investigation of direct metal laser sintering downskin parameters’ sagging effect on microchannels
The International Journal of Advanced Manufacturing Technology, Vol. 114, Haziran 2021, s. 2567-2575, ISSN: 0268-3768
ÇALIŞKAN CEMAL İRFAN, ÖZER GÖKHAN, COŞKUN MERT, KOÇ EBUBEKİR
|
Comparison of the effect of different topological designs and process parameters on mechanical strength in gears
The International Journal of Advanced Manufacturing Technology, Vol. 119, Nisan 2022, s. 6707-6716, ISSN: 0268-3768
BULDUK MUSTAFA ENES, ÇALIŞKAN CEMAL İRFAN, COŞKUN MERT, ÖZER GÖKHAN, KOÇ EBUBEKİR
|
Estimation of surface roughness in selective laser sintering using computational models
The International Journal of Advanced Manufacturing Technology, Vol. 123, Aralık 2022, s. 3033-3045, ISSN: 0268-3768
KOÇ EBUBEKİR, ZEYBEK SULTAN, ÖZBAY KISASÖZ BURÇİN, ÇALIŞKAN CEMAL İRFAN, BULDUK MUSTAFA ENES
|
A novel synchronous scanning strategy in laser powder bed fusion and effect on mechanical properties of industrial gears
The International Journal of Advanced Manufacturing Technology, Vol. 128, Eylül 2023, s. 2459-2467, ISSN: 0268-3768
ÇALIŞKAN CEMAL İRFAN
|
Comparison of in-plane compression of additively manufactured Ti6Al4V 2D auxetic structures: Lattice design, manufacturing speed, and failure mode
Materials and Design, Vol. 241, Mayıs 2024, ISSN: 0264-1275
EREN ZANA,GÖKÇEKAYA ÖZKAN,BALKAN DEMET,NAKANO TAKAYOSHI,MECİTOĞLU ZAHİT
|
Integrating Additive Manufacturing and Composite Manufacturing Techniques to Build a General-Purpose UAV
International Journal of Aviation Science and Technology, Vol. 6, No. 2, Haziran 2025, s. 91-105, ISSN: 2687-525X
KONYALIOĞLU TURAN,ALNIPAK SİNAN,ŞAHİN HALİL İBRAHİM,ALTUĞ ERDİNÇ
|