High-rate activated sludge process as a pre-treatment alternative to direct filtration with microfiltration/ultrafiltration for municipal wastewater reclamation to produce cooling water
Journal of Environmental Chemical Engineering, Vol. 12, No. 6, Aralık 2024, ISSN: 2213-3437
GÜLHAN EKSİN HAZAL,HAMİDİ MUHAMMED NİMET,ERYILDIZ YESİR BAHRİYE,MEŞE BEYDA,BAŞA ŞAFAK,UÇAŞ GÜLİN,YÜKSEKDAĞ AYŞE,TÜRKEN TÜRKER,GÜVEN HÜSEYİN,ÖZGÜN ERŞAHİN HALE,ERŞAHİN MUSTAFA EVREN,KOYUNCU İSMAİL,ÖZTÜRK İZZET
|
Removal of Taste and Odor Causing Compounds from Drinking Water Sources by Peroxone Process: Laboratory and Pilot Scale Studies
OZONE-SCIENCE & ENGINEERING, Vol. 43, Aralık 2020, ISSN: 0191-9512
FAKIOĞLU KUTLU MALHUN, GÜLHAN HAZAL, ÖZGÜN ERŞAHİN HALE, ERŞAHİN MUSTAFA EVREN, ÖZTÜRK İZZET
|
Post-Treatment of High-Rate Activated Sludge Process Effluent for Irrigational Use
7th MEMTEK International Symposium on Membrane Technologies and Applications, İstanbul/TÜRKİYE, 14 Mart 2023
GÜLHAN HAZAL, ÖZÇELİK KADİR, ERYILDIZ YESİR BAHRİYE, HAMİDİ MUHAMMED NİMET, YÜKSEKDAĞ AYŞE, KOYUNCU İSMAİL, GÜVEN HÜSEYİN, ERŞAHİN MUSTAFA EVREN, ÖZGÜN ERŞAHİN HALE, ÖZTÜRK İZZET
|
Modelling of high-rate activated sludge process: Assessment of model parameters by sensitivity and uncertainty analyses
Science of The Total Environment, Vol. 915, Mart 2024, ISSN: 0048-9697
GÜLHAN HAZAL, DİZAJİ REZA FARAJİ, HAMİDİ MUHAMMED NİMET, ABDELRAHMAN AMR MUSTAFA, SAFAK BASA EZGİ, CİNGOZ SEYMA, KOYUNCU İSMAİL, GÜVEN HÜSEYİN, ÖZGÜN ERŞAHİN HALE, ERŞAHİN MUSTAFA EVREN, DERELİ RECEP KAAN, ÖZTÜRK İZZET
|
Determination of optimum operational conditions for the removal of 2-MIB from drinking water by peroxone process: a pilot-scale study
IWA Publishing, Vol. 20, Temmuz 2020, ISSN: 1606-9749
FAKIOĞLU KUTLU MALHUN, GÜLHAN HAZAL, ÖZGÜN ERŞAHİN HALE, ERŞAHİN MUSTAFA EVREN, ÖZTÜRK İZZET
|
Reduction of sewage sludge and N2O emissions by an Oxic Settling Anaerobic (OSA) process: The case study of Corleone (Italy) wastewater treatment plant
Science of The Total Environment, Vol. 906, Ocak 2024, s. 14, ISSN: 0048-9697
MANNİNA GİORGİO, COSENZA ALİDA, Dİ TRAPANİ DANİELE, GÜLHAN HAZAL, MİNEO ANTONİO, MOFATTO PAULO MARCELO BOSCO
|
Tuning the Morphology of ZnO Nanostructures with the Ultrasonic Spray Pyrolysis Process
METALS, Vol. 8, No. 8, Temmuz 2018, ISSN: 2075-4701
EMİL ELİF,ALKAN GÖZDE,GÜRMEN SEBAHATTİN,RUDOLF REBEKA,DARJA JENKO,FRİEDRİCH BERND
|
Hydrometallurgical recycling of waste NdFeB magnets: design of experiment, optimisation of low concentrations of sulphuric acid leaching and process analysis
Informa UK Limited, Vol. 62, Nisan 2022, ISSN: 0008-4433
UYSAL EMİRCAN, EMİL KAYA ELİF, AL SERHAT, STOPİC SRECKO, FRİEDRİCH BERND, GÜRMEN SEBAHATTİN
|
NdFeB Magnets Recycling Process: An Alternative Method to Produce Mixed Rare Earth Oxide from Scrap NdFeB Magnets
Metals, Vol. 11, No. 5, Ocak 2021, s. 716, ISSN: 2075-4701
EMİL KAYA ELİF, KAYA OZAN, STOPİCH SREÇKO, GÜRMEN SEBAHATTİN, FRİEDRİCH BERND
|
Determination of Optimum Operational Conditions for the Removal of 2-Methylisoborneol and Geosmin from Drinking Water by Peroxone Process
4th International Conference on Environmental Science and Technology (ICOEST), 19 Eylül 2018
GÜLHAN HAZAL,FAKIOĞLU MALHUN,ERŞAHİN MUSTAFA EVREN,ÖZGÜN ERŞAHİN HALE,ÖZTÜRK İZZET
|
Long term experiences in a pilot-scale high-rate activated sludge system with lamella clarifier: Effluent quality and carbon capture
Journal of Water Process Engineering, Vol. 49, Ocak 2022, ISSN: 2214-7144
GÜLHAN HAZAL, HAMİDİ MUHAMMED NİMET, ABDELRAHMAN AMR MUSTAFA, FAKIOĞLU KUTLU MALHUN, MEŞE BEYDA, YÖRÜK MUSTAFA, SAĞIR KURT ECE, KOYUNCU İSMAİL, GÜVEN HÜSEYİN, ÖZGÜN ERŞAHİN HALE, ERŞAHİN MUSTAFA EVREN, ÖZTÜRK İZZET
|
Recovery of Diamond and Cobalt Powders from Polycrystalline Drawing Die Blanks via Ultrasound Assisted Leaching Process—Part 2: Kinetics and Mechanisms
Metals, Vol. 10, No. 6, Haziran 2020, s. 741, ISSN: 2075-4701
KİEBLİNG FERDİNAND, STOPİC SRECKO, GÜRMEN SEBAHATTİN, FRİEDRİCH BERND
|
Identification of a Hot Rolling Process and Comparison with the Empirical Models
ESDA 2002 6th Biennial Conference on Engineering Systems Design and Analysis, 8 Temmuz 2002
ÖZNERGİZ ERTAN, ÖZSOY CAN, CEMAL BAYKARA, KURAL AYHANPALABIYIK MEHMET
|
Design and control of an energy-efficient intensified process for biobutanol purification from isopropanol-butanol-ethanol (IBE) fermentation broth
Elsevier BV, Vol. 193, Kasım 2023, ISSN: 0255-2701
OKSAL İLAYDA NUR, KAYMAK DEVRİM BARIŞ
|
Comparison of Empirical and Neural Network Hot Rolling Process Models
Proceedings of the Institution of Mechanical Engineering, Part B, Journal of Engineering Manufacture, Vol. 223, Mart 2009, s. 305-312
ÖZNERGİZ ERTAN, DELİCE İLKER, ÖZSOY CAN, KURAL AYHAN
|
Neural Network Modeling of A Plate Hot Rolling Process
MMM’2004, 11th IFAC Symposium on Automation in Mining, Mineral and Metal Processing, 8 Eylül 2004
ÖZNERGİZ ERTAN, GÜLEZ KAYHAN, ÖZSOY CAN, KURAL AYHAN
|
Identification and Control of the Raw Material Blending Process in Cement Industry
International Journal of Adaptive Control and Signal Processing, Vol. 18, Mart 2004, s. 427-442
KURAL AYHAN, ÖZSOY CAN
|
Thermal modeling of variable process parameter effects in powder bed fusion using electron beam
Rapid Prototyping Journal, Vol. 30, Ağustos 2024, ISSN: 1355-2546
KIRIM BARIŞ,SÖYLEMEZ EMRECAN,TAN EVREN,YASA EVREN
|
Understanding Process Parameters Strategy to Simulate the Thermal Models of Electron Beam Melting
Advances in Additive Manufacturing with Powder Metallurgy– AMPM22, Portland, Oregon/AMERİKA BİRLEŞİK DEVLETLERİ, 12 Haziran 2022
KIRIM BARIŞ, SÖYLEMEZ EMRECAN, TAN EVREN, YASA EVREN
|
Experimental Investigation of Processing Temperature Effect on Adhesive Bond Strength Between Engineering Thermoplastics in the Plastic Injection Molding Process
Journal of Manufacturing Science and Engineering, Vol. 146, Temmuz 2024, ISSN: 1087-1357
ÖZEL ALİ,SÖYLEMEZ EMRECAN
|