Analytical modeling and experimentally optimizing synergistic effect on thermal conductivity enhancement of polyurethane nanocomposites with hybrid carbon nanofillers
POLYMER COMPOSITES, Vol. 42, No. 2, Şubat 2021, s. 944-954, ISSN: 0272-8397
NAVİDFAR AMİR,TRABZON LEVENT
|
Design and Fabrication of Integrated Microchannel and Peristaltic Micropump System for Inertial Particle Separation
The 4th International Conference on Mechatronics and Mechanical Engineering, 28 Kasım 2017
SONMEZ UTKU,BEKİN MUHAMMED,TRABZON LEVENT
|
The impact of nitrogen-doped reduced graphene oxide reinforcement on the thermal and mechanical properties of CFRP
Carbon Trends, Vol. 15, Haziran 2024, ISSN: 2667-0569
SOYUGÜZEL TAHİR,MECİTOĞLU ZAHİT,KAFTELEN ODABAŞI HÜLYA
|
Mechanical and Thermal Behaviors of Polypropylene Multi Walled Carbon Nanotube Nanocomposite Monofilaments
Fibres and Textiles in Eastern Europe, Vol. 21, No. 2(98), Mart 2013, s. 22-27
ERSOY MEHMET SABRİ,ÖNDER KARAOĞLU EMEL
|
Thermal and Mechanical Analysis of PM Assisted Synchronous Reluctance Motor for Washing Machines
ELECO 2017 10th International Conference on Electrical and Electronics Engineering, Bursa/TÜRKİYE, 30 Kasım 2017
LİRİDON XHELADİNİ,TAP ALPER,İMERYÜZ MURAT,AŞAN TAŞDEMİR,YILMAZ MURAT,ERGENE LALE
|
Damped vibration analysis of cracked Timoshenko beams with restrained end conditions,
Journal of the Brazilian Society of Mechanical Sciences and Engineering, Vol. 42, No. 9, Ağustos 2020, s. 488-506, ISSN: 1678-5878
PALA YAŞAR, BEYÇİMEN SEMİH
|
Utilization of partially destructive test methods on mechanical properties of historical lime mortars
10th International Conference on Structural Analysis of Historical Constructions, 13 Eylül 2016, s. 1415-1418
TUNCEL ERMAN YİĞİT, POLAT PEKMEZCİ IŞIL, PEKMEZCİ BEKİR YILMAZ
|
Effects of Lime Mortar Design on Mechanical Properties of Historical Masonry Units
8th International Conference on Structural Analysis of Historical Constructions, 12 Ekim 2012
PEKMEZCİ BEKİR YILMAZ, ATAHAN HAKAN NURİ, POLAT PEKMEZCİ IŞIL, TUNCEL ERMAN YİĞİT
|
Utilizing the Potential of Waste Hemp Reinforcement: Investigating Mechanical and Thermal Properties of Polypropylene and Polylactic Acid Biocomposites
ACS Omega, Vol. 9, No. 8, Şubat 2024, s. 8818-8828, ISSN: 2470-1343
YILMAZ ANIL,GENCELİ GÜNER FATMA ELİF
|
Sensor fault-tolerant control of a quadrotor unmanned aerial vehicle
Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, Vol. 236, No. 2, Şubat 2022, s. 417-433, ISSN: 10.1177/09544100211015587
PATAN MEHMET GÖKBERK, ÇALIŞKAN FİKRET
|
Preparation and Application of Urethane Acrylate Coatings for Enhanching Mechanical Properties of Coagulated Surfaces
Karaelmas Fen ve Mühendislik Dergisi, Vol. 6, No. 2, Aralık 2016, s. 359-368, ISSN: 2146-4987
ÇAKIR ÇANAK TUBA,KIRAYLAR ESRA,SERHATLI İBRAHİM ERSİN
|
Examination of the mechanical behaviors of beams made of functionally graded materials
IOCENS 2021 - INTERNATIONAL ONLINE CONFERENCES ON ENGINEERING AND NATURAL SCIENCES, GÜMÜŞHANE/TÜRKİYE, 5 Temmuz 2021
YÜCEL ADİL
|
Exergy efficiency and EEXI analysis of a marine power plant at partial load conditions
Proceedings of the Institution of Mechanical Engineers, Part M: Journal of Engineering for the Maritime Environment, Vol. 238, No. 3, Ağustos 2024, s. 543-552, ISSN: 1475-0902
KOÇAK GAZİ,DURMUŞOĞLU YALÇIN
|
Thermoeconomic Optimization and Performance Analysis of a Regenerative Closed Brayton Cycle with Internal Irreversibilities and Pressure Losses
Iranian Journal of Science and Technology, Transactions of Mechanical Engineering, Vol. 41, No. 1, Mart 2017, s. 61-70, ISSN: 2228-6187
DURMUŞOĞLU YALÇIN,ÜST YASİN,KAYADELEN HASAN KAYHAN
|
Analysis of Friction Induced Thermo Mechanical Stresses on a Heat Exchanger Pile in Isothermal Soil
Geotechnical and Geological Engineering, Vol. 33, No. 2, Nisan 2015, s. 357-371, ISSN: 0960-3182
ÖZÜDOĞRU TOLGA YILMAZ,OLGUN CELAL GÜNEY,ARSON CHLOE F
|
Thermo mechanical radial expansion of heat exchanger piles and possible effects on contact pressures at pile soil interface
Géotechnique Letters, Vol. 4, No. 3, Temmuz 2014, s. 170-178, ISSN: 2045-2543
OLGUN CELAL GÜNEY,ÖZÜDOĞRU TOLGA YILMAZ,ARSON CHLOE F
|
Design and Analyses of a Propeller for Underwater Vehicles Using Computational Fluid Dynamics
6th International Conference on Mechanical and Aerospace Engineering, ROMA/İTALYA, 16 Temmuz 2015
GÜNGÖR EMRE,ÖZDEMİR İLYAS BEDİİ
|
Formation of insulating polyurethane foam in a reacting mold flow
3rd International Conference on Advances in Mechanical Engineering, 19 Aralık 2017
ÖZDEMİR İLYAS BEDİİ,PAHLAVANİ HAMED
|
Structures of flow around a full scale side mirror of a car with relevance to aerodynamic noise
Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, Vol. 218, No. 10, Ocak 2004, s. 1085-1097, ISSN: 0954-4070
DOLEK OMER,OZKAN GOKHAN,ÖZDEMİR İLYAS BEDİİ
|
Effect of aging heat treatment on mechanical properties of expanded glass reinforced syntactic metal foam
Kovove Materialy-Metallic Materials, Vol. 59, No. 6, Ocak 2021, s. 345-355, ISSN: 0023-432X
AKGÜN İSMAİL CEM, BOLAT ÇAĞIN, GÖKŞENLİ ALİ
|