A COMPARISON OF DIRECT VS. INDIRECT STABILIZATION ON BOTH SIMULATION AND IMPLEMENTATION BASIS AND A COMPLEMENTARY FILTER APPROACH FOR NON-STIFF MECHANICAL SYSTEMS
Fen Bilimleri Enstitüsü, İstanbul Teknik Üniversitesi, 2022
EMİN DENİZ
|
Improving the mechanical properties of layered composites under out-of plane loading by means of adding nanofibers produced with novel solution blowing technique
Fen Bilimleri Enstitüsü, Marmara Üniversitesi, 2021
YUSUF POLAT
|
Impact of Chemical and Physical Properties of Lime on Calcium Carbonate Precipitation from Calcium Hydroxide and CO2-gas
Faculty Mechanical, Maritime and Materials Engineering, Technische Universiteit Delft
SERGİO ANDERES PEREZ ESCOBAR
|
Evaluating the efficacy of polyethylene glycol and magnesium chloride as anti-freeze agents on the mechanical properties of clays subjected to freeze-thaw cycles
Lisansüstü Eğitim Enstitüsü, İstanbul Teknik Üniversitesi, 2024
AMIN YEGANEH RIKHTEHGAR
|
Investigation of the structural and mechanical properties of the single crystal CMSX-4 SLS superalloy exposed to high temperature for long term
Lisansüstü Eğitim Enstitüsü, İstanbul Teknik Üniversitesi, 2021
SERTAÇ ALPTEKİN
|
Contributions to analysis of effect of winding geometry on forces and mechanical deformations on distribution transformers windings caused under short-circuit operation
Fen Bilimleri Enstitüsü, İstanbul Teknik Üniversitesi, 2015
SADULAH KAYA
|
Comparative investigation of the effects of carbon nanotubes of different diameter and length on thermal and mechanical properties in pmma nanocomposite reinforced with mwcnt
Lisansüstü Eğitim Enstitüsü, İstanbul Teknik Üniversitesi, 2023
MELTEM UZUNOĞLU
|
Synergistic effect of nanoparticles in three-dimensional network of carbon-based quantum dots on mechanical properties of polyurethane hybrid nanocomposite foams
Lisansüstü Eğitim Enstitüsü, İstanbul Teknik Üniversitesi, 2021
MAKBULE IRMAK PEKER
|
Analysis of mechanical and sorptivity properties of mortar mixtures containing fly ash modified with nano-silica using the Taguchi design method
Lisansüstü Eğitim Enstitüsü, İstanbul Teknik Üniversitesi, 2023
MAHSA FARSHBAF MAHERIAN
|
INFLUENCE OF POLYMER TYPE AND BLENDING ON MECHANICAL PROPERTIES OF
COAXIAL ELECTROSPUN VASCULAR GRAFTS
15th International Conference on Nanomaterials (NANOCON 2023), Brno/ÇEK CUMHURİYETİ, 18 Ekim 2023
ÖZDEMİR SUZAN, ÖZTEMUR JANSET, SEZGİN HANDE, YALÇIN ENİŞ İPEK
|
Numerical Investigation of The Effect of Cut and Fill Mining on
The Surrounded Rock Mass Behavior
1st Int. Conf. on Fundamental Research in Metallurgical, Mechanical and Mining Engineering, 16 Kasım 2023
SHIRMOHAMMADZADEH MALEKI FARİD, ÖZTÜRK CÜNEYT ATİLLA
|
Mechanical spectra and calorimetric evaluation of gelatin-xanthan gum systems
with high levels of co-solutes in the glassy state
FOOD HYDROCOLLOIDS, Vol. 30, No. 2, Mart 2013, s. 531-540, ISSN: 0268-005X
ALTAY FİLİZ,SUNDARAM GUNASEKARAN
|
DESIGN AND OPTIMIZATION OF MODULAR BALLISTIC PROTECTION PANELS
FOR MILITARY SHELTERS
7th INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING, İstanbul/TÜRKİYE, 24 Aralık 2024, s. 615-621
CENGİZ CANBERK,TAŞDEMİR HACI ABDULLAH
|
MECHANICAL PROPERTIES AND ENVIRONMENTAL AGING BEHAVIOR
OF NANOCLAY REINFORCED POLYMER COMPOSITES
4th INTERNATIONAL MATERIALS TECHNOLOGIES AND METALLURGY CONFERENCE-2025, İstanbul/TÜRKİYE, 2 Ekim 2025, s. 51-58
AKTAŞ DENİZ,TAŞDEMİR HACI ABDULLAH
|
Effect of Promising Sustainable Nano-Reinforcements on Polysulfone/Polyvinylpyrrolidone-Based Membranes: Enhancing Mechanical Properties and Water Filtration Performance
Polymers, Vol. 16, No. 24, Aralık 2024, ISSN: 2073-4360
ACARER ARAT SEREN,PİR İNCİ,TÜFEKCİ MERTOL,ÖZ NURTAÇ,TÜFEKCİ NEŞE
|
INFLUENCE OF POLYMER TYPE AND BLENDING ON MECHANICAL PROPERTIES OF
COAXIAL ELECTROSPUN VASCULAR GRAFTS
15th International Conference on Nanomaterials (NANOCON 2023), Brno/ÇEK CUMHURİYETİ, 18 Ekim 2023
ÖZDEMİR SUZAN, ÖZTEMUR JANSET, SEZGİN HANDE, YALÇIN ENİŞ İPEK
|
How to Determine the Mechanical Properties of Laminated
Composite Plates?
2nd International Congress on Ship and Marine Technology, İstanbul/TÜRKİYE, 16 Eylül 2021
İRTEGÜN LİNA, TÜRKMEN HALİT SÜLEYMAN, BAYER İSMAİL
|
ANALYSIS OF MECHANICAL BEHAVIOR OF TERMOPLASTIC
COMPOSITES
The 3rd International Conference of Materials and Engineering Technology (TICMET'21), Gaziantep/TÜRKİYE, 3 Kasım 2021, s. 265-265
YÜCEL AYSU HANDE, KÖSEMEN ELİFNUR, KUZU ALİ TANER, BAKKAL MUSTAFA
|
Tribological and Mechanical Evaluation of Polycarbonate Nanocomposites Reinforced
with Halloysite Nanotubes and Precipitated Calcium Carbonate under Dry Sliding
Conditions
3rd International Conference Advanced Mechanics: Structure, Materials, Tribology, Semerkant/ÖZBEKİSTAN, 22 Eylül 2025, s. 109
AKTAŞ DENİZ,TAŞDEMİR HACI ABDULLAH
|