Structural Characterization of Ion Nitrided 316L Austenitic Stainless Steel: Influence of Treatment Temperature and Time
METALS, Vol. 12, No. 2, Ocak 2022, s. 306, ISSN: 2075-4701
GÜLMEZ TURGUT,YILMAZ ŞAFAK,ERGUN CELALETDİN,GÖKÇEKAYA ÖZKAN,TAKAYOSHİ NAKANO
|
Comparative Study of Surface Roughness in Upskin and Downskin Regions of Conformal Cooling Channel Sections Fabricated with AlSi10Mg, Ti64, 316L in AM-LPBF
Journal of Advanced Research in Natural and Applied Sciences, Vol. 11, No. 2, Haziran 2025, s. 117-131, ISSN: 2757-5195
ÇALIŞKAN CEMAL İRFAN
|
Comparison of CCC Geometries Produced with 316L and AlSi10Mg Materials, Sagging and Deformation Investigation in Channel Sections
10th International Conference on Advanced Technologies-2022, Van/TÜRKİYE, 25 Kasım 2022
ÖZER GÖKHAN, ÇALIŞKAN CEMAL İRFAN
|
DMLS Eklemeli İmalat'ta Silindirik Olmayan Uyumlu Soğutma (USK) Kanal Geometrilerinin 316L ile Üretilebilirlik Araştırması
10th INTERNATIONAL CONGRESS ON ENGINEERING, ARCHITECTURE AND DESIGN, İstanbul/TÜRKİYE, 24 Aralık 2022
ÇALIŞKAN CEMAL İRFAN
|
Structural Characterization of Ion Nitrided 316L Austenitic Stainless Steel: Influence of Treatment Temperature and Time
MDPI AG, Vol. 12, Şubat 2022, ISSN: 2075-4701
GÖKÇEKAYA ÖZKAN, ERGUN CELALETDİN, GÜLMEZ TURGUT, NAKANO TAKAYOSHI, YILMAZ ŞAFAK
|
Stress Corrosion Cracking and Hydrogen Embrittlement of Type 316L Austenitic Stainless Steel Beneath MgCl2 and MgCl2:FeCl3 Droplets
CORROSION, Vol. 75, Ocak 2019, ISSN: 0010-9312
ÖRNEK CEM
|
Numerical and experimental comparison of fractural characteristics of 316L stainless steel
FEN BİLİMLERİ ENSTİTÜSÜ, ANKARA YILDIRIM BEYAZIT ÜNİVERSİTESİ, 2019
YALÇIN TAMER
|
Induction assisted aluminizing of 316L and Inconel 718 alloys
LİSANSÜSTÜ EĞİTİM ENSTİTÜSÜ, İSTANBUL TEKNİK ÜNİVERSİTESİ, 2026
APTULLAH KARAKAŞ
|
Düşük sıcaklıkta yapılan plazma nitrürleme işleminin 316L ostenitik paslanmaz çeliğinin malzeme özelliklerine etkisinin incelenmesi
FEN BİLİMLERİ ENSTİTÜSÜ, İSTANBUL TEKNİK ÜNİVERSİTESİ, 2005
MUSTAFA CEM İĞDİL
|
Farklı tavlama sıcaklıkları ve sürelerinin boru kompansatörünün 316L körük elemanı üzerine etkisi
FEN BİLİMLERİ ENSTİTÜSÜ, İSTANBUL TEKNİK ÜNİVERSİTESİ, 2017
PINAR KORKMAZ TİLKİ
|
Repassivation/depassivation kinetics of 316L stainless steel in reciprocating sliding contacs
FEN BİLİMLERİ ENSTİTÜSÜ, İSTANBUL TEKNİK ÜNİVERSİTESİ, 2008
GÖKHAN BÜYÜKSARI
|
The Corrosion Behaviour of Austenitic 316L Stainless Steel After Low T Plasma Nitridation in the Physiological Solutions
Plasma Processes and Polymers, Vol. 4, No. S1, Nisan 2007, s. 717-720, ISSN: 16128850
ARSLAN ERDEM,İGDİL MUSTAFA C,TRABZON LEVENT,KAZMANLI KURSAT,GÜLMEZ TURGUT
|
EVALUATION OF GEOMETRICAL DEVIATIONS AND POROSITIESON BOTH CFRP AND AISI 316L STEEL MATERIAL ON ADDITIVEMANUFACTURING
Additive Manufacturing Conference 2019, 17 Ekim 2019, s. 155-160
YEŞİLOVA AYSU HANDE,TİMUR AZMİ,BAKKAL MUSTAFA
|
Effect of Si3N4 addition on the morphological and structural properties of the 316L stainless steel for nuclear applications
Resolution and Discovery, Aralık 2017, s. 1-8, ISSN: 2498-8707
ZİNE HAROUNE RACHİD BEN,ŞAHİN FİLİZ,HORVATH ZSOLT E,CZİGANY ZSOLT,HORVATH AKOS,BALAZSİ KATALİN,BALAZSİ CSABA
|
The Corrosion Behaviour of Austenitic 316L Stainless Steel After Low T Plasma Nitridation in the Physiological Solutions
Plasma Processes and Polymers, Vol. 4, No. S1, Nisan 2007, s. 717-720, ISSN: 16128850
ARSLAN ERDEM,İĞDİL MUSTAFA C,TRABZON LEVENT,KAZMANLI MUHAMMET KÜRŞAT,GÜLMEZ TURGUT
|
Evaluation of Geometrical Deviations and Porosities on Both CFRP and AISI 316L Steel Material on Additive Manufacturing
Additive Manufacturing Conference 2019, İstanbul, Türkiye, İstanbul/TÜRKİYE, 17 Eylül 2019
YÜCEL AYSU HANDE, BAKKAL MUSTAFA, TİMUR AZMİ
|
Enhanced Wear and Oxidation Resistance of AISI 316L Stainless Steel via Slurry and Hot-Dip Aluminizing Assisted by Rapid Induction Heating
LANGMUIR, Vol. 41, No. 48, Ocak 2025, s. 13, ISSN: 0743-7463
KARAKAŞ APTULLAH,BALCI ERDEM,BAYDOĞAN MURAT
|
A phenomenological sintering model of binder-jetted 316L stainless steel parts calibrated by in situ monitoring
Powder Metallurgy, Ekim 2025, ISSN: 0032-5899
SÖYLEMEZ EMRECAN,YALÇIN MEHMET FATİH,ANLAYIŞ ÖMER FARUK,ÖNLER RECEP
|
Effects of post-heat treatment on the mechanical properties of additive manufactured 316L stainless steel and Inconel 625 super alloy
Procedia Structural Integrity, Vol. 68, Ocak 2025, s. 981-987, ISSN: 2452-3216
RAJASHİLPAGE YASİTH H.,YILDIZ RAŞİD AHMED,MALEKAN MOHAMMAD
|
Evaluating porosity differences in wrought and additively manufactured 316L stainless steel: a tensile deformation study via high-resolution X-ray nanotomography
Journal of Materials Science, Vol. 60, Temmuz 2025, s. 13029-13047, ISSN: 0022-2461
YILDIZ RAŞİD AHMED,MİRSAFİ FATEMEH SADAT,LEİSSNER TİLL,MALEKAN MOHAMMAD
|