Modelling and analysis of wire ropes subjected to transverse impact load using peridynamic theory
JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY, Vol. 39, No. 2, Ocak 2024, s. 847-858, ISSN: 1300-1884
CANDAŞ ADEM, ÖTERKUŞ ERKAN, İMRAK CEVAT ERDEM
|
Contacts and cracks of complex shapes Crack contact dualities and relations between normal and shear compliances
International Journal of Engineering Science, Vol. 50, No. 1, Ocak 2012, s. 233-255, ISSN: 00207225
KIRIŞ AHMET,KACHANOV MARK
|
van der Waals force induced crack healing in dry rough interfaces
Journal of Physics D: Applied Physics, Vol. 49, No. 7, Ocak 2016, ISSN: 1361-6463
SÖYLEMEZ EMRECAN,DE BOER MAARTEN P
|
Fiber volume ratio effect on the crack bridging mechanism in uniaxial reinforced ceramic composites
Materials Science and Engineering: A, Vol. 387389, Aralık 2004, s. 882-886, ISSN: 09215093
ERGÜN HALE,BODUROĞLU MEHMET HASAN
|
A Case Study for Tool Steel Deformation: Crack Investigation of a Cold Work Tool Steel Used for Trimming Operations
Uluslararası Metalurji ve Malzeme Kongresi, İstanbul/TÜRKİYE, 10 Haziran 2021, s. 171-174
SÜSLÜ BERK, SAVAŞKAN BERKAY, ÖZCAN ONUR, MUTLU MUAMMER, KELEŞ ÖZGÜL
|
Fatigue crack growth analysis of biaxially loaded hole-edge cracks using boundary cracklet method (BCM)
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, Vol. 44, No. 10, Ekim 2021, s. 2693-2705, ISSN: 8756-758X
TALAL AHMED, YAVUZ ABDÜLKADİR, TÜRKMEN HALİT SÜLEYMAN
|
Précis of gap test results requiring reappraisal of line crack and phase-field models of fracture mechanics
Engineering Structures, Vol. 250, Ocak 2022, s. 113285, ISSN: 0141-0296
BAZANT ZDENEK P., DÖNMEZ AHMET ABDULLAH, NGUYEN HOANG T.
|
An investigation of crack formation in surface paste disposal method for pyritic Pb–Zn tailings
International Journal of Environmental Science and Technology, Temmuz 2017, ISSN: 1735-1472
BAŞÇETİN ATAÇ,TÜYLÜ SERKAN,ÖZDEMİR ORHAN,ADIGÜZEL DENİZ,MOSTAFA BENZAAZOUA
|
An investigation of crack formation in surface paste disposal
23rdInternational Symposium on Mine Planning & Equipment Selection (MPES 2015), 9 Kasım 2015, s. 35-40
BAŞÇETİN ATAÇ,ÖZDEMİR ORHAN,TÜYLÜ SERKAN,ADIGÜZEL DENİZ
|
Residual thermal stresses and calculation of the critical metal particle size for interfacial crack extension in metal-ceramic matrix composites
Acta Materialia, Vol. 44, No. 1, Ocak 1996, s. 279-287, ISSN: 13596454
KOLHE RAJ,HUİ CY,ÜSTÜNDAĞ ERSAN,SASS STEPHEN L
|
Crack tip process zone domain switching in a soft lead zirconate titanate ceramic
Acta Materialia, Vol. 55, No. 16, Eylül 2007, s. 5538-5548, ISSN: 13596454
JONES J L,MOTAHARİ S M,VARLİOGLU M,LİENERT U,BERNİER J V,HOFFMAN M,ÜSTÜNDAĞ ERSAN
|
Natural frequencies of parabolic arches with a single crack on opposite cross-section sides
JOURNAL OF VIBRATION AND CONTROL, Vol. 25, No. 7, Nisan 2019, s. 1313-1325, ISSN: 1077-5463
EROĞLU UĞURCAN,RUTA GİUSEPPE,TÜFEKCİ EKREM
|
Crack modeling and identification in curved beams using differential evolution
International Journal of Mechanical Sciences, Vol. 131132, Ekim 2017, s. 435-450, ISSN: 00207403
EROĞLU UĞURCAN,TÜFEKCİ EKREM
|
Exact solution based finite element formulation of cracked beams for crack detection
International Journal of Solids and Structures, Vol. 96, Ekim 2016, s. 240-253, ISSN: 00207683
EROĞLU UĞURCAN,TÜFEKCİ EKREM
|
Size Effect Analysis of Concrete Beams Under Bending Using Crack-Band Approach
Journal of Polytechnic, Vol. 25, No. 2, Haziran 2022, s. 605-613, ISSN: 1302-0900
AYHAN BAHAR, LALE EROL, ÇELİK MUHTAROĞLU NİLAY
|
Fatigue crack growth simulation of interacting multiple cracks in perforated plates with multiple holes using boundary cracklet method
Fatigue Fracture of Engineering Materials Structures, Vol. 44, No. 2, Şubat 2021, s. 333-348, ISSN: 8756-758X
TALAL AHMED, YAVUZ ABDÜLKADİR, TÜRKMEN HALİT SÜLEYMAN
|
Interacting Fatigue Crack Growth Analysis with Boundary Cracklet Method
Advanced Materials Research, Vol. 445, Ocak 2012, s. 1017-1022, ISSN: 1662-8985
TÜRKMEN HALİT SÜLEYMAN,A KADİR YAVUZ,A DENİZ SENALP,S LEİGH PHOENİX
|
The Effect of The Crack Width on The Relationship Between The Drying and Restrained Shrinkages
3rd Annual International Conference on Architecture and Civil Engineering, 13 Nisan 2015
YATAĞAN MEHMET SERKAN
|
Fibre Volume Ratio Effect on the Crack Bridging Mechanism in Uniaxial Reinforced Ceramic Composites
Thirteenth International Conference on the Strength of Materials ICSMA-13, Vol. 387389, 25 Ağustos 2003, s. 882-886
ERGÜN HALE,BODUROĞLU MEHMET HASAN
|
Measuring and Modeling Capillary Bridge Dynamics and Crack Healing between Surfaces of Nanoscale Roughness
Society of Experimental Mechanics Annual Conference, Greenville/AMERİKA BİRLEŞİK DEVLETLERİ, 4 Haziran 2018
SÖYLEMEZ EMRECAN,DE BOER MAARTEN P.
|