Influence of Melt Quality on Machinability of HPDC Al9Si3Cu
JOM, Ocak 2022, ISSN: 1047-4838
KALKAN İBRAHİM HALİL, VARDAR ÖMER, HIZLI İBRAHİM GÖKSEL, DIŞPINAR DERYA
|
A Study on the Machinability and Environmental Effects of Milling AISI 5140 Steel in Sustainable Cutting Environments
Machines, Vol. 12, No. 436, Haziran 2024, s. 1-15, ISSN: 2075-1702
ZEROOĞLU TUFAN,DEĞİRMENCİ ÜNAL,ŞAP SERHAT
|
The effect of cutting parameters and tool geometry on machinability of cotton fiber reinforced polymer composites Cutting forces burr formation and chip morphology
Journal of Industrial Textiles, Vol. 45, No. 6, Mayıs 2016, s. 1364-1382, ISSN: 1528-0837
KUZU ALİ TANER,BAKKAL MUSTAFA
|
Machinability of bulk metallic glass materials on milling and drilling
Advanced Materials Research, No. 83-86, 2010, s. 335-341
BAKKAL MUSTAFA
|
The Effects of Tool Geometry on Machinability of Textile Fabric Reinforced Termoplastic Matrix Composites
Advanced Materials Research, No. 445, 2012, s. 841-846
BAKKAL MUSTAFA
|
Machinability of Bulk Metallic Glass Materials on Milling and Drilling
Advanced Materials Research, Vol. 8386, Aralık 2009, s. 335-341, ISSN: 1662-8985
BAKKAL MUSTAFA,DERİN CEVAT BORA,NAKŞİLER VELİ
|
Assessment of the machinability and energy consumption characteristics of Cu–6Gr hybrid composites under sustainable operating
Journal of the Brazilian Society of Mechanical Sciences and Engineering, Vol. 46, No. 221, Mart 2024, s. 1-16, ISSN: 1678-5878
USCA ÜSAME ALİ,ŞAP SERHAT,UZUN MAHİR,DEĞİRMENCİ ÜNAL
|
Investigation The Effects of Sustainable Cooling/Lubrication Conditions On the Machinability of Al-3gr Based Hybrid Composites
Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi, Vol. 27, No. 3, Eylül 2024, s. 688-705, ISSN: 1309-1751
USCA ÜSAME ALİ,DEĞİRMENCİ ÜNAL,ŞAP SERHAT
|
Determination of Machinability Properties of Nimonic-60 Superalloy Under Sustainable Conditions
Iğdır Üniversitesi Fen Bilimleri Enstitüsü Dergisi, Vol. 14, No. 3, Eylül 2024, s. 1228-1239, ISSN: 2536-4618
DEĞİRMENCİ ÜNAL
|
Machining characterization and optimization under different cooling/lubrication conditions of Al-4Gr hybrid composites fabricated by vacuum sintering
Vacuum, Vol. 208, No. 111741, Şubat 2023, s. 1-16, ISSN: 1879-2715
DEĞİRMENCİ ÜNAL, USCA ÜSAME ALİ, ŞAP SERHAT
|
Machinability Properties of Nimonic 50 Superalloy under Sustainable Conditions
International Conference on Scientific and Innovatİon Research-III, 3 Mayıs 2024, s. 433-444
DEĞİRMENCİ ÜNAL,ŞAP SERHAT,USCA ÜSAME ALİ
|
The effect of zirconia addition on crystallization behaviour and machinability of potassium mica and fluorapatite glass ceramics
10thInternational Conference and Exhibition of the European Ceramic Society,Berlin/Almanya
GOLLER G, CEYLAN U, AKİN I
|
An experimental examination of the dry drilling machinability features of cellular glass‐filled new‐generation metallic composite foams
Wiley, Vol. 54, Kasım 2023, ISSN: 0933-5137
BOLAT ÇAĞIN, ERGENE BERKAY, AKGÜN İSMAİL CEM, KARAKILINÇ UÇAN, GÖKŞENLİ ALİ
|
Machinability Study of Aluminum/Pumice Syntactic Foam Fabricated by Sandwich Infiltration Casting
4th International Mediterranean Science and Engineering Congress (IMSEC 2019), Antalya/TÜRKİYE, Vol. 1, 25 Nisan 2019, s. 354-354
AKGÜN İSMAİL CEM, BOLAT ÇAĞIN, GÖKŞENLİ ALİ
|
Effect of TiO2 addition on crystallization and machinability of potassium mica and fluorapatite glass ceramics
JOURNAL OF MATERIALS SCIENCE, Vol. 42, No. 3, Şubat 2007, s. 883-888, ISSN: 0022-2461
AKIN İPEK,GÖLLER GÜLTEKİN
|
The effect of zirconia addition on crystallization behaviour and machinability of potassium mica and fluorapatite glass ceramics
HIGH TEMPERATURE MATERIALS AND PROCESSES, Vol. 29, No. 4, 2010, s. 305-311, ISSN: 0334-6455
CEYLAN UĞUR,AKIN İPEK,GÖLLER GÜLTEKİN
|
Investigating on the machinability assessment of precision machining pumice reinforced AA7075 syntactic foam
Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Vol. 236, No. 5, Mart 2022, s. 2380-2394, ISSN: 0954-4062
BOLAT ÇAĞIN, ERGENE BERKAY, KARAKILINÇ UÇAN, GÖKŞENLİ ALİ
|
An experimental examination of the dry drilling machinability features of cellular glass‐filled new‐generation metallic composite foams
Wiley, Vol. 54, Ocak 2023, s. 1378-1389, ISSN: 0933-5137
BOLAT ÇAĞIN, ERGENE BERKAY, AKGÜN İSMAİL CEM, KARAKILINÇ UÇAN, GÖKŞENLİ ALİ
|
Effect of cementite carbide tool coating type and tool radius on cutting performance
2016 7th International Conference on Mechanical and Aerospace Engineering (ICMAE), 18 Temmuz 2016, s. 78
YILDIZ TUĞÇE,İREZ ALAEDDİN BURAK,SUR GÖKHAN
|