Machining performance of TiN coatings incorporating indium as a solid lubricant
Surface and Coatings Technology, Vol. 203, No. 22, Ağustos 2009, s. 3370-3376, ISSN: 02578972
GULERYUZ CANAN G., KRZANOWSKİ JAMES E., VELDHUİS STEPHEN C., FOX-RABİNOVİCH GERMAN S.
|
Dry and minimum quantity lubrication high-throughput drilling of compacted graphite iron
Machining Science and Technology, Vol. 22, No. 4, Şubat 2018, s. 652-670, ISSN: 1091-0344
WU WENWU,KUZU ALİ TANER,STEPHENSON DAVİD,HONG JUN,BAKKAL MUSTAFA,SHİH ALBERT J
|
Effect Of Cutting Strategy On Machining Of Thin Walled Polymer
8th International Symposium On Machining, 2 Kasım 2017
KEKLİK BURAK,KUZU ALİ TANER,BAŞÇI ÜMİT G,KARAGÜZEL UMUT,KAYIHAN METE,BAKKAL MUSTAFA
|
Cutting Temperature and Tool Wear in Turn Milling
The 4th International Conference on Virtual Machining Process Technology (VMPT 2015), 2 Haziran 2015
KARAGÜZEL UMUT,BUDAK ERHAN,BAKKAL MUSTAFA
|
Electron microscopy of bulk metallic glass machining chips
Journal of Non-Crystalline Solids, No. 355, Ocak 2009, s. 2220-2223
BAKKAL MUSTAFA
|
EXPERIMENTAL AND ANALYTICAL INVESTIGATION OF DRILLING IN HIGH PERFORMANCE HYBRID COMPOSITES
10th International Congress on Machining, Antalya/TÜRKİYE, 7 Kasım 2019
KAYIHAN METE,KARAGÜZEL UMUT,BAKKAL MUSTAFA
|
ÖZEL GRAFİTLERİN DELİK DELME İŞLEMiNİN İNCELENMESİ
10th International Congress on Machining, Antalya/TÜRKİYE, 7 Kasım 2019
YILDIZ MUSTAFA,KUZU ALİ TANER,KAYIHAN METE,YEŞİLOVA AYSU HANDE,BAKKAL MUSTAFA
|
EXPERIMENTAL AND ANALYTICAL INVESTIGATION OF DRILLING IN HIGH PERFORMANCE HYBRID COMPOSITES
10th International Congress on Machining, Antalya/TÜRKİYE, 7 Kasım 2019
KAYIHAN METE,KARAGÜZEL UMUT,BAKKAL MUSTAFA
|
ÖZEL GRAFİTLERİN DELİK DELME İŞLEMiNİN İNCELENMESİ
10th International Congress on Machining, Antalya, Türkiye,, 7 Kasım 2019
YILDIZ MUSTAFA, KUZU ALİ TANER, KAYIHAN METE, YÜCEL AYSU HANDE, BAKKAL MUSTAFA
|
Experimental study of minimum quantity lubrication effect on compacted graphite iron machining
Fen Bilimleri Enstitüsü, İstanbul Teknik Üniversitesi, 2013
ARMİN BİJANZAD
|
Machining parameters and distortion analyses in end milling of AA2050 and AA7050
Fen Bilimleri Enstitüsü, Ankara Yıldırım Beyazıt Üniversitesi, 2022
ELVAN ATEŞ
|
OPTIMIZATION OF CUTTING PARAMETERS AND MACHINING DISTORTION ANALYSIS FOR AA2050
31st International Conference on Metallurgy and Materials, 18 Mayıs 2022, s. 611-615, ISSN: 2694-9296
ATEŞ ELVAN, EVİS ZAFER, ÖZTÜRK FAHRETTİN
|
Investigating on the machinability assessment of precision machining pumice reinforced AA7075 syntactic foam
Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Vol. 236, No. 5, Mart 2022, s. 2380-2394, ISSN: 0954-4062
BOLAT ÇAĞIN, ERGENE BERKAY, KARAKILINÇ UÇAN, GÖKŞENLİ ALİ
|
Increasing the Performance of High-Speed Solid Rotor Induction Motor by Plunge Type Electrical Discharge Machining
Advances in Electrical and Computer Engineering, Vol. 23, No. 1, Ocak 2023, s. 79-86, ISSN: 1582-7445
GÜLBAHÇE MEHMET ONUR, LORDOĞLU ABDULSAMED, KOCABAŞ DERYA AHMET
|
Real Time Identification of Incipient Surface Morphology Variations in Ultraprecision Machining Process
Journal of Manufacturing Science and Engineering, Vol. 136, No. 2, Nisan 2014, s. 21008, ISSN: 1087-1357
PRAHALAD RAO,SATİSH BUKKAPATNAM,BEYCA ÖMER FARUK,ZHENYU (JAMES) KONG,KOMANDURİ RANGA
|
An Evidence Theoretic Heterogeneous Sensor Data Fusion Approach for Real time Monitoring in Ultraprecision Machining UPM Process
INFORMS World Conference, Minneapolis/AMERİKA BİRLEŞİK DEVLETLERİ, 6 Ekim 2013
BEYCA ÖMER FARUK, RAO PRAHALAD
|
Heterogeneous Sensor Data Fusion Approach for Real time Monitoring in Ultraprecision Machining UPM Process Using Non Parametric Bayesian Clustering and Evidence Theory
IEEE Transactions on Automation Science and Engineering, Vol. 13, No. 2, Nisan 2016, s. 1033-1044, ISSN: 1545-5955
BEYCA ÖMER FARUK,RAO PRAHALAD,KONG ZHENYU,BUKKAPATNAM SATİSH,KOMANDURİ RANGA
|
Strategic Comparison of Additive Manufacturing and Robotic Machining with Analytical Hierarchy Process under Different Competition and Production Scenarios
25th International Conference on Multiple Criteria Decision Making 2019, 16 Haziran 2019
OZGEN IREM,POLAT SEÇKİN,ASAN UMUT
|
Effect of Competition and Production Characteristics on Competitive Advantage of Additive Manufacturing and Robotic Machining
International Engineering and Technology Management Summit 2019, 10 Ekim 2019
OZGEN IREM,POLAT SEÇKİN,ASAN UMUT
|
Boriding of WC-6wt. Co Inserts for Machining of Inconel 718 Alloy
9th International Conference on Tribology, 13 Eylül 2017
YILMAZ RIFAT,ATAR ERDEM,ÇİMENOĞLU HÜSEYİN
|