Extended Kronecker summation for cluster treatment of LTI systems with multiple delays
SIAM Journal on Control and Optimization, Vol. 46, No. 1, Mart 2007, s. 143-156, ISSN: 03630129
ERGENÇ ALİ FUAT,OLGAC NEJAT,HASSAN FAZELİNİA
|
Factors Affecting the Adsorption of Chromium VI on Activated Carbon
JOURNAL OF ENVIRONMENTAL SCIENCE AND HEALTH PART A-TOXIC/HAZARDOUS SUBSTANCES & ENVIRONMENTAL ENGINEERING, İstanbul/TÜRKİYE, Vol. 41, No. 9, Eylül 2006, s. 1967-1980, ISSN: 1093-4529
YAVUZ REHA,ORBAK İLKÜN,YAVUZ NİLGÜN
|
A Polynomial Method for Stability Analysis of LTI Systems Independent of Delays
SIAM Journal on Control and Optimization, Vol. 55, No. 4, Temmuz 2017, s. 2661-2683, ISSN: 0363-0129
ALİKOÇ BARAN,ERGENÇ ALİ FUAT
|
Solution diversity in multi-objective optimization: A study in virtual reality
IEEE Conference on Evolutionary Computation – CEC 2008 at World Congress on Computational Intelligence WCCI 2008, Hong Kong, 1 Haziran 2008
CIFTCIOGLU OZER,BITTERMANN MICHAEL STEFAN
|
Multi-objective optimal design of hybrid viscoelastic/composite sandwich beams by using the generalized differential quadrature method and the non-dominated sorting genetic algorithm II
Structural and Multidisciplinary Optimization, Vol. 56, No. 4, Ekim 2017, s. 885-901, ISSN: 1615-147X
ARIKOĞLU AYTAÇ
|
Skip cycle method with a valve-control mechanism for spark ignition engines
ENERGY CONVERSION AND MANAGEMENT, Vol. 146, Ocak 2017, s. 134-146, ISSN: 0196-8904
BAYKARA CEMAL,KUTLAR OSMAN AKIN,DOĞRU BARIŞ,ARSLAN HİKMET
|
Sensor fault detection based on kalman filtering in multirotor systems
The 7th International Conference on Control and Optimization with Industrial Applications, 26 Ağustos 2020
PATAN MEHMET GÖKBERK,ÇALIŞKAN FİKRET
|
Design and optimization of an axially-slitted high-speed solid rotor induction motor
2015 9th International Conference on Electrical and Electronics Engineering (ELECO), Bursa, Turkey/TÜRKİYE, 26 Kasım 2015
OĞUZ AHMET HAKAN, GÜLBAHÇE MEHMET ONUR, KOCABAŞ DERYA AHMET
|
Optimization of Methotrexate Release from Chitosan Beads by Response Surface Methodology
Fourth International Conference on New Trends in Chemometrics and Applications” (NTCA-2019, Aydın/TÜRKİYE, 1 Mayıs 2019
KAHYA NİLAY,GÖLCÜ AYŞEGÜL,BERKER FATMA BEDİA
|
HIGH SPEED HULL FORM OPTIMIZATION FOR SEAKEEPING
ADVANCES IN ENGINEERING SOFTWARE, Vol. 22, No. 3, 1995, s. 179-189
KÜKNER ABDİ,SARIÖZ KADİR
|
Optimization of air jet texturing parameters for acrylic filament yarns
The Journal of The Textile Institute, Vol. 112, No. 12, Ocak 2021, s. 1974-1978, ISSN: 0040-5000","1754-2340
MUTLU ARAS, DEMİR ALİ
|
Optimization of enzymatic methanolysis of soybean oil by response surface methodology
Journal of the American Oil Chemists' Society, Vol. 83, No. 11, Kasım 2006, s. 929-932, ISSN: 0003-021X
DEMİRKOL SEDA,AKSOY H AYŞE,TÜTER MELEK,ÜSTÜN GÜLDEM,ŞAŞMAZ DURSUN ALİ
|
Design and analysis of a permanent magnet synchronous motor for elevator applications
2017 International Conference on Optimization of Electrical and Electronic Equipment (OPTIM) 2017 Intl Aegean Conference on Electrical Machines and Power Electronics (ACEMP), 25 Mayıs 2017
BAKHTİARZADEH HOSEİN,POLAT ABDULLAH,ERGENE LALE
|
Foam Optimization and Relationship between Foam Use and EPB TBM Performance
3rd Eastern European Tunnelling Conference (EETC 2016), Vol. 1, No. 8 pages, 23 Mayıs 2016
TOLOUEİ SAHAND,AVUNDUK EMRE,ÇOPUR HANİFİ,TUMAÇ DENİZ,BALCI CEMAL,BİLGİN NUH,ÇINAR MUAMMER,KAHYA S
|
Global geometry optimization of small silicon clusters with empirical potentials and at the DFT level
Phys. Chem. Chem. Phys., Vol. 6, Ocak 2004, s. 503
TEKİN ADEM,BERND HARTKE
|
Crashworthiness Optimization of Nested and Concentric Circular Tubes Using Response Surface Methodology and Genetic Algorithm
Latin American Journal of Solids and Structures, Vol. 15, No. 5, Ocak 2018, ISSN: 1679-7825
USTA FATİH,ZANA EREN,KURTARAN HASAN,TÜRKMEN HALİT SÜLEYMAN,KAZANCI ZAFER,MECİTOĞLU ZAHİT
|
Diagnosis of Different Eccentricity Faults in Induction Motors Based on Electrical and Magnetic Signatures and Unbalanced Magnetic Pull
The Joint Conference 2019 International Conference on Optimization of Electrical and Electronic Equipment 2019 Intl Aegean Conference on Electrical Machines and Power Electronics (OPTIM- ACEMP),, 27 Ağustos 2019
SARIKAYA ALP,POLAT ABDULLAH,ERGENE LALE
|
The Utilization of Waste Activated Bleaching Earth in Biodiesel Production Optimization by Response Surface Methodology
Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, Vol. 32, No. 19, Ağustos 2010, s. 1812-1820, ISSN: 1556-7036
GÜL Ö FARUK,TÜTER MELEK,AKSOY H AYŞE
|
Optimization of the PD coefficient in a flight simulator control via genetic algorithms
Aircraft Engineering and Aerospace Technology, Vol. 74, No. 2, Nisan 2002, s. 147-153, ISSN: 0002-2667
YURT SAİT,OZKOL İBRAHİM,KAYA METİN ORHAN,HACIZADE CENGİZ
|
Effects of the rotor design parameters on the torque production of a PMaSynRM for washing machine applications
2017 International Conference on Optimization of Electrical and Electronic Equipment (OPTIM) 2017 Intl Aegean Conference on Electrical Machines and Power Electronics (ACEMP), 25 Mayıs 2017
TAP ALPER,XHELADİNİ LİRİDON,ASAN TASDEMİR,İMERYÜZ MURAT,YILMAZ MURAT,ERGENE LALE
|