Brittle failure processes in veined clay rock with Large strength contrasts between vein and matrix
47th US Rock Mechanics / Geomechanics Symposium, San Francisco, 23 Haziran 2013
FLORİAN AMANN,PETER KAİSER,ÜNDÜL ÖMER
|
TAKAGI-SUGENO FUZZY APPROACH IN ROCK ARMORED SLOPES FOR 2 WAVE RUNUP ESTIMATION
COASTAL ENGINEERING JOURNAL, Vol. 50, No. 2, 2008, s. 161-177, ISSN: 0578-5634
ERDİK TARKAN,SAVCI M.EMİN
|
Effect of Difficult Ground Conditions on Double Shield TBM Performance 9th Asian Rock Mechanics Symposium
9th Asian Rock Mechanics Symposium-ARMS9, 18 Ekim 2016
AVUNDUK EMRE,SHATERPOUR MAMAGHANİ AYDIN,TUMAÇ DENİZ
|
Effect of Geotechnical Properties on TBM Performance European Rock Mechanics Symposium
European Rock Mechanics Symposium (EUROCK 2012), 28 Mayıs 2012
AVUNDUK EMRE,ÇOPUR HANİFİ,BİLGİN NUH,BALCI CEMAL,TUMAÇ DENİZ
|
Pre investigation to Determine the Effects of Rock Properties on Performance of Chain Saw and Diamond Wire Machines
8th Asian Rock Mechanics Symposium, 14 Ocak 2014
TUMAÇ DENİZ,AVUNDUK EMRE,ER SELMAN,BAŞYİĞİT MİKAİL,ÇOPUR HANİFİ,BALCI CEMAL,İBRAHİM YASAN
|
A New Generation of Portable Linear Rock Cutting Machine PLCM and Comparison with Full Scale Linear Rock Cutting Tests
ITA WTC 2015, 22 Mayıs 2015
BALCI CEMAL,ÇOMAKLI RAMAZAN,CAN POLAT,TUMAÇ DENİZ,AVUNDUK EMRE,ÇOPUR HANİFİ,BİLGİN NUH
|
Rock Mechanics Aspects Related to Cutting Efficiency of Mechanical Excavators in Complex Geology 25 Years of Experience in Istanbul
European Rock Mechanics Symposium (EUROCK 2012), 28 Mayıs 2012
BİLGİN NUH,BALCI CEMAL,ÇOPUR HANİFİ,TUMAÇ DENİZ,AVUNDUK EMRE
|
A New Approach to Source Rock Occurrence: The Relationships between Petroleum Source Rock, Ophiolites, Mantle Plume, and Mass Extinction
BILMES EN 2019 - IV. International Scientific and Vocational Studies Congress - Engineering, Ankara/TÜRKİYE, 7 Ekim 2019
ÖZDEMİR ADİL,PALABIYIK YILDIRAY
|
The assessment of rock cuttability and physical and mechanical rock properties from a texture coefficient
Journal of South African Institute of Mining and Metallurgy, No. 7, Mart 2004, s. 397-403
ÖZTÜRK CÜNEYT ATİLLA,NASUF SABRİ ERKİN,BİLGİN NUH
|
The Effect of Rock Texture on Intact Rock Mass and Cuttability Properties of Rocks
Proceedings of the 4th International Conference on Computer Applications in the Mineral Industries (CAMI 2003)
ÖZTÜRK C.A., NASUF E.
|
Estimation of rock strength from quantitative assessment of rock texture
Journal of South African Institute of Mining and Metallurgy, Vol. 114, Haziran 2014, s. 471-480
ÖZTÜRK CÜNEYT ATİLLA,NASUF SABRİ ERKİN,KAHRAMAN SAİR
|
Software for RQD and Rock Mass Evaluation
45th U.S. Rock Mechanics Symposium (ARMA 2011), 26 Haziran 2011, s. 2083-2088
ÖNSEL E., ÖZTÜRK C.A., ÖZKAN M, NASUF E.
|
Discrete Analysis of Damage and Shear Banding in Argillaceous Rocks
Rock Mechanics and Rock Engineering, Vol. 51, No. 5, Mayıs 2018, s. 1521-1538, ISSN: 0723-2632
DİNÇ GÖĞÜŞ ŞAZİYE ÖZGE,SCHOLTES LUC
|
Source rock characteristics of Eocene bituminous shales and the effect of redox conditions on source rock potential Nallıhan Ankara Central Anatolian Basin
Energy Sources Part A-Recovery Utilization and Environmental Effects, Vol. 38, No. 2, Şubat 2016, s. 227-235, ISSN: 1556-7036
SARI ALİ, DÖNER ZEYNEP, KOCA DERYA, ALİYEV SADAY AZADOĞLU
|
Predicting the Performance of Chain Saw Machines Based on Shore Scleroscope Hardness
Rock Mechanics and Rock Engineering, Vol. 47, No. 2, Mart 2014, s. 703-715, ISSN: 0723-2632
TUMAÇ DENİZ
|
Investigation into the Effects of Textural Properties on Cuttability Performance of a Chisel Tool
ROCK MECHANICS AND ROCK ENGINEERING, Vol. 51, Nisan 2018, s. 1127-1248, ISSN: 0723-2632
TUMAÇ DENİZ,ÇOPUR HANİFİ,BALCI CEMAL,ER SELMAN,AVUNDUK EMRE
|
A New Generation of Portable Linear Rock Cutting Machine PLCM and Comparison with Full Scale Linear Rock Cutting Tests
ITA World Tunnel Congress (WTC 2015) and 41st General Assembly, Dubrovnik/HIRVATİSTAN, Vol. 10, No. pages, 22 Mayıs 2015, ISSN: 978-953-55728-5-5
BALCI CEMAL,ÇOMAKLI RAMAZAN,CAN POLAT,TUMAÇ DENİZ,AVUNDUK EMRE,ÇOPUR HANİFİ,BİLGİN NUH
|
Investigation of the Effect of Textural Properties towards Predicting Sawing Performance of Diamond Wire Machines
EUROCK 2016, Rock Mechanics & Rock Engineering: From the Past to the Future, Vol. 1, 29 Ağustos 2016, s. 211-215
TUMAÇ DENİZ,AVUNDUK EMRE,ÇOPUR HANİFİ,BALCI CEMAL,ER SELMAN
|
Pre investigation to Determine the Effects of Rock Properties on Performance of Chain Saw and Diamond Wire Machines
8th Asian Rock Mechanics Symposium-ARMS8, s. 8
TUMAÇ DENİZ,AVUNDUK EMRE,SELMAN ER,BAŞYİĞİT MİKAİL,ÇOPUR HANİFİ,BALCI CEMAL,YASAN İLKER
|
Unrelieved Spesific Energy Estimation fromPLCM and FLCM Linear Rock Cutting Tests andComparison with Rock Properties
ITA - AITES WORLD TUNNEL CONGRESS, 21 Nisan 2018
BALCI CEMAL,ÇOMAKLI RAMAZAN,BİLGİN NUH,ÇOPUR HANİFİ,TUMAÇ DENİZ,AVUNDUK EMRE
|